lkml.org 
[lkml]   [2014]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 03/12] at91: dt: sam9261: Added support for the lcd display
On 18:07 Thu 09 Jan     , boris brezillon wrote:
> On 09/01/2014 13:31, Jean-Jacques Hiblot wrote:
> >Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> >---
> > arch/arm/boot/dts/at91sam9261.dtsi | 37 ++++++++++++++++++++++++++++++++++++-
> > arch/arm/boot/dts/at91sam9261ek.dts | 31 +++++++++++++++++++++++++++++++
> > arch/arm/mach-at91/at91sam9261.c | 1 +
> > 3 files changed, 68 insertions(+), 1 deletion(-)
> >
> >diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
> >index 773c3d6..cd219b9 100644
> >--- a/arch/arm/boot/dts/at91sam9261.dtsi
> >+++ b/arch/arm/boot/dts/at91sam9261.dtsi
> >@@ -290,7 +290,33 @@
> > atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> > };
> > };
> >-
> >+ fb {
> >+ pinctrl_fb: fb-0 {
> >+ atmel,pins =
> >+ <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
> >+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
> >+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
> >+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
> >+ AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
> >+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
> >+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */
> >+ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
> >+ AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
> >+ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
> >+ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
> >+ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */
> >+ AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB18 periph A */
> >+ AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */
> >+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */
> >+ AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B */
> >+ AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B */
> >+ AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B */
> >+ AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB26 periph B */
> >+ AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB27 periph B */
> >+ AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB28 periph B */
> >+ >;
> >+ };
> >+ };
> > pioA: gpio@fffff400 {
> > compatible = "atmel,at91rm9200-gpio";
> > reg = <0xfffff400 0x200>;
> >@@ -436,6 +462,15 @@
> > };
> > };
> >+ fb0: fb@0x00600000 {
> >+ compatible = "atmel,at91sam9261-lcdc";
> >+ reg = <0x00600000 0x1000>;
> >+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
> >+ pinctrl-names = "default";
> >+ pinctrl-0 = <&pinctrl_fb>;
> >+ status = "disabled";
> >+ };
> >+
> > nand0: nand@40000000 {
> > compatible = "atmel,at91rm9200-nand";
> > #address-cells = <1>;
> >diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> >index f3d22a9..03c05fc 100644
> >--- a/arch/arm/boot/dts/at91sam9261ek.dts
> >+++ b/arch/arm/boot/dts/at91sam9261ek.dts
> >@@ -52,6 +52,37 @@
> > reg = <0x0 0x20000>;
> > };
> > };
>
> One more nitpick :
> I think this should be taken out in another patch (first 9261 lcdc support,
> then ek board lcd def) :p.

yes mandatory

Best Regards,
J.
>
> >+
> >+ fb0: fb@0x00600000 {
> >+ display = <&display0>;
> >+ status = "okay";
> >+ atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
> >+ display0: display {
> >+ bits-per-pixel = <16>;
> >+ atmel,lcdcon-backlight;
> >+ atmel,dmacon = <0x1>;
> >+ atmel,lcdcon2 = <0x80008002>;
> >+ atmel,guard-time = <1>;
> >+ atmel,lcd-wiring-mode = "BRG";
> >+
> >+ display-timings {
> >+ native-mode = <&timing0>;
> >+ timing0: timing0 {
> >+ clock-frequency = <4965000>;
> >+ hactive = <240>;
> >+ vactive = <320>;
> >+ hback-porch = <1>;
> >+ hfront-porch = <33>;
> >+ vback-porch = <1>;
> >+ vfront-porch = <0>;
> >+ hsync-len = <5>;
> >+ vsync-len = <1>;
> >+ hsync-active = <1>;
> >+ vsync-active = <1>;
> >+ };
> >+ };
> >+ };
> >+ };
> > };
> > leds {
> >diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> >index 200d17a..a67bfe6 100644
> >--- a/arch/arm/mach-at91/at91sam9261.c
> >+++ b/arch/arm/mach-at91/at91sam9261.c
> >@@ -197,6 +197,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
> > /* more tc lookup table for DT entries */
> > CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
> > CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
> >+ CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
> > CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
> > CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
> > CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


\
 
 \ /
  Last update: 2014-01-15 13:01    [W:0.332 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site