lkml.org 
[lkml]   [2014]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux-next: manual merge of the net-next tree with the mips tree
Hi all,

Today's linux-next merge of the net-next tree got a conflict in arch/mips/bcm47xx/setup.c between commits dc8db0fd9f9f ("MIPS: BCM47XX: Prepare support for LEDs"), db780310ed48 ("MIPS: BCM47XX: Prepare support for GPIO buttons") and 7fb942c59696 ("MIPS: BCM47XX: fix position of cpu_wait disabling") from the mips tree and commit b04138b33520 ("b44: use fixed PHY device if we do not find any") from the net-next tree.

I fixed it up (see below) and can carry the fix as necessary (no action
is required).

--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au

diff --cc arch/mips/bcm47xx/setup.c
index 12d77e9c2cb4,9057728ac56b..000000000000
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@@ -26,10 -26,11 +26,13 @@@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/

+#include "bcm47xx_private.h"
+
#include <linux/export.h>
#include <linux/types.h>
+ #include <linux/ethtool.h>
+ #include <linux/phy.h>
+ #include <linux/phy_fixed.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
@@@ -229,34 -226,14 +232,40 @@@ void __init plat_mem_setup(void
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
bcm47xx_board_detect();
+ mips_set_machine_name(bcm47xx_board_get_name());
}

+static int __init bcm47xx_cpu_fixes(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ /* Nothing to do */
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* The BCM4706 has a problem with the CPU wait instruction.
+ * When r4k_wait or r4k_wait_irqoff is used will just hang and
+ * not return from a msleep(). Removing the cpu_wait
+ * functionality is a workaround for this problem. The BCM4716
+ * does not have this problem.
+ */
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ cpu_wait = NULL;
+ break;
+#endif
+ }
+ return 0;
+}
+arch_initcall(bcm47xx_cpu_fixes);
+
+ static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+ };
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@@ -271,9 -248,7 +280,10 @@@
break;
#endif
}
+ bcm47xx_buttons_register();
+ bcm47xx_leds_register();
+
+ fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-01-15 04:21    [W:0.306 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site