lkml.org 
[lkml]   [2013]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black
Hi,

On Mon, Sep 09, 2013 at 04:26:38PM +0200, Koen Kooi wrote:
>
> Op 9 sep. 2013, om 16:15 heeft Felipe Balbi <balbi@ti.com> het volgende geschreven:
>
> > Hi,
> >
> > On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:
> >> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
> >> so create a common dtsi both can use.
> >>
> >> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver
> >> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
> >> of 1.8.
> >>
> >> MMC support for AM335x still isn't in, so only the LDO change has been added.
> >>
> >> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> >> Tested-by: Tom Rini <trini@ti.com>
> >> Tested-by: Matt Porter <matt.porter@linaro.org>
> >
> > not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will
> > prevent the use of RF cape, no ?
>
> Complete and utter lack of software from TI for the RF cape is
> preventing the RF cape from working regardless of HDMI entries.

How would you ever use RF cape with HDMI on BBB ? It doesn't matter the
amount of code TI (or whoever else) writes down, that will never work
fine.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-09-09 20:41    [W:0.056 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site