lkml.org 
[lkml]   [2013]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/4] ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
Date
The spi-s3c64xx device is also used on the s3c2416 and s3c2443 SoCs.
The driver also already uses only generic dma-engine operations.

Therefore add another elif to set the s3c24xx filter.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/plat-samsung/devs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 8ce0ac0..a7b9b9e 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,7 @@
#include <linux/ioport.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>

#include <media/s5p_hdmi.h>

@@ -1499,8 +1500,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C24XX_DMAC)
+ pd.filter = s3c24xx_dma_filter;
#endif

s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
--
1.7.10.4


\
 
 \ /
  Last update: 2013-09-05 01:01    [W:1.270 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site