lkml.org 
[lkml]   [2013]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/11] iio: pressure-core: st: Clean-up error handling in probe function
Date
This patch contains some pretty basic clean-ups in probe() pertaining to
the simplification of error handling and a couple of readability adaptions.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/iio/pressure/st_pressure_core.c | 41 +++++++++++++++------------------
1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 3cf54ed..2893d08 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -224,21 +224,23 @@ static const struct iio_trigger_ops st_press_trigger_ops = {

int st_press_common_probe(struct iio_dev *indio_dev)
{
- int err;
struct st_sensor_data *pdata = iio_priv(indio_dev);
+ int irq = pdata->get_irq_data_ready(indio_dev);
+ int err;

indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;

err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_press_sensors), st_press_sensors);
+ ARRAY_SIZE(st_press_sensors),
+ st_press_sensors);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;

pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
- pdata->multiread_bit = pdata->sensor->multi_read_bit;
- indio_dev->channels = pdata->sensor->ch;
- indio_dev->num_channels = pdata->sensor->num_ch;
+ pdata->multiread_bit = pdata->sensor->multi_read_bit;
+ indio_dev->channels = pdata->sensor->ch;
+ indio_dev->num_channels = pdata->sensor->num_ch;

if (pdata->sensor->fs.addr != 0)
pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
@@ -248,32 +250,27 @@ int st_press_common_probe(struct iio_dev *indio_dev)

err = st_sensors_init_sensor(indio_dev);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;

- if (pdata->get_irq_data_ready(indio_dev) > 0) {
+ if (irq > 0) {
err = st_press_allocate_ring(indio_dev);
if (err < 0)
- goto st_press_common_probe_error;
+ return err;

err = st_sensors_allocate_trigger(indio_dev,
- ST_PRESS_TRIGGER_OPS);
- if (err < 0)
- goto st_press_probe_trigger_error;
+ ST_PRESS_TRIGGER_OPS);
+ if (err < 0) {
+ st_press_deallocate_ring(indio_dev);
+ return err;
+ }
}

err = iio_device_register(indio_dev);
- if (err)
- goto st_press_device_register_error;
-
- return err;
-
-st_press_device_register_error:
- if (pdata->get_irq_data_ready(indio_dev) > 0)
+ if (err && irq > 0) {
st_sensors_deallocate_trigger(indio_dev);
-st_press_probe_trigger_error:
- if (pdata->get_irq_data_ready(indio_dev) > 0)
st_press_deallocate_ring(indio_dev);
-st_press_common_probe_error:
+ }
+
return err;
}
EXPORT_SYMBOL(st_press_common_probe);
--
1.8.1.2


\
 
 \ /
  Last update: 2013-09-04 12:01    [W:0.312 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site