lkml.org 
[lkml]   [2013]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] i2c: enable runtime PM for I2C adapter devices enumerated from ACPI
Date
On Monday, September 30, 2013 07:20:59 PM Rafael J. Wysocki wrote:
> On Monday, September 30, 2013 05:43:48 PM Mika Westerberg wrote:
> > The ACPI specification requires the parent device to be powered on before
> > any of its children. It can be only powered off when all the children are
> > already off.
> >
> > Currently whenever there is no I2C traffic going on, the I2C controller
> > driver can put the device into low power state transparently to its
> > children (the I2C client devices). This violates the ACPI specification
> > because now the parent device is in lower power state than its children.
> >
> > In order to keep ACPI happy we enable runtime PM for the I2C adapter device
> > if we find out that the I2C controller was in fact an ACPI device. In
> > addition to that we attach the I2C client devices to the ACPI power domain
> > and make sure that they are powered on when the driver ->probe() is called.
> >
> > Non-ACPI devices are not affected by this change.
> >
> > This patch is based on the work by Aaron Lu and Lv Zheng.
> >
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > ---
> > drivers/i2c/i2c-core.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 46 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> > index 29d3f04..fa861ad 100644
> > --- a/drivers/i2c/i2c-core.c
> > +++ b/drivers/i2c/i2c-core.c
> > @@ -236,6 +236,27 @@ int i2c_recover_bus(struct i2c_adapter *adap)
> > return adap->bus_recovery_info->recover_bus(adap);
> > }
> >
> > +static void acpi_i2c_device_pm_get(struct i2c_client *client)
> > +{
> > + struct i2c_adapter *adap = client->adapter;
> > +
> > + /* Make sure the adapter is active */
> > + if (ACPI_HANDLE(adap->dev.parent))
> > + pm_runtime_get_sync(&adap->dev);
> > + if (ACPI_HANDLE(&client->dev))
> > + acpi_dev_pm_attach(&client->dev, true);
>
> It would be sufficient to do
>
> if (ACPI_HANDLE(&client->dev)) {
> pm_runtime_get_sync(&adap->dev);
> acpi_dev_pm_attach(&client->dev, true);
> }
>
> here (and below), because I don't think the client with an ACPI handle and the

s/I don't think/I think/

> parent without one is extremely unlikely (to the point of non-existence
> actually ;-)). And even if something like that happens, then we only enable
> runtime PM for the adapter if the parent has an ACPI handle, so it still should
> be OK.
>
> Apart from this the patch looks good to me.
>
> > +}
> > +
> > +static void acpi_i2c_device_pm_put(struct i2c_client *client, bool detach)
> > +{
> > + struct i2c_adapter *adap = client->adapter;
> > +
> > + if (ACPI_HANDLE(&client->dev) && detach)
> > + acpi_dev_pm_detach(&client->dev, true);
> > + if (ACPI_HANDLE(adap->dev.parent))
> > + pm_runtime_put(&adap->dev);
> > +}
> > +
> > static int i2c_device_probe(struct device *dev)
> > {
> > struct i2c_client *client = i2c_verify_client(dev);
> > @@ -254,11 +275,15 @@ static int i2c_device_probe(struct device *dev)
> > client->flags & I2C_CLIENT_WAKE);
> > dev_dbg(dev, "probe\n");
> >
> > + acpi_i2c_device_pm_get(client);
> > +
> > status = driver->probe(client, i2c_match_id(driver->id_table, client));
> > if (status) {
> > client->driver = NULL;
> > i2c_set_clientdata(client, NULL);
> > }
> > +
> > + acpi_i2c_device_pm_put(client, !!status);
> > return status;
> > }
> >
> > @@ -271,6 +296,8 @@ static int i2c_device_remove(struct device *dev)
> > if (!client || !dev->driver)
> > return 0;
> >
> > + acpi_i2c_device_pm_get(client);
> > +
> > driver = to_i2c_driver(dev->driver);
> > if (driver->remove) {
> > dev_dbg(dev, "remove\n");
> > @@ -283,6 +310,8 @@ static int i2c_device_remove(struct device *dev)
> > client->driver = NULL;
> > i2c_set_clientdata(client, NULL);
> > }
> > +
> > + acpi_i2c_device_pm_put(client, true);
> > return status;
> > }
> >
> > @@ -294,8 +323,11 @@ static void i2c_device_shutdown(struct device *dev)
> > if (!client || !dev->driver)
> > return;
> > driver = to_i2c_driver(dev->driver);
> > - if (driver->shutdown)
> > + if (driver->shutdown) {
> > + acpi_i2c_device_pm_get(client);
> > driver->shutdown(client);
> > + acpi_i2c_device_pm_put(client, false);
> > + }
> > }
> >
> > #ifdef CONFIG_PM_SLEEP
> > @@ -1263,6 +1295,16 @@ exit_recovery:
> > bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
> > mutex_unlock(&core_lock);
> >
> > + /*
> > + * For ACPI enumerated controllers we must make sure that the
> > + * controller is powered on before its children. Runtime PM handles
> > + * this for us once we have enabled it for the adapter device.
> > + */
> > + if (ACPI_HANDLE(adap->dev.parent)) {
> > + pm_runtime_no_callbacks(&adap->dev);
> > + pm_runtime_enable(&adap->dev);
> > + }
> > +
> > return 0;
> >
> > out_list:
> > @@ -1427,6 +1469,9 @@ void i2c_del_adapter(struct i2c_adapter *adap)
> > return;
> > }
> >
> > + if (ACPI_HANDLE(adap->dev.parent))
> > + pm_runtime_disable(&adap->dev);
> > +
> > /* Tell drivers about this removal */
> > mutex_lock(&core_lock);
> > bus_for_each_drv(&i2c_bus_type, NULL, adap,
> >
>
> Thanks!
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2013-09-30 19:21    [W:0.362 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site