lkml.org 
[lkml]   [2013]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/7] scsi/bfa: use pcie_capability_xxx to simplify code
On Tue, Sep 3, 2013 at 5:34 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Tue, Sep 03, 2013 at 03:35:09PM +0800, Yijing Wang wrote:
>> Pcie_capability_xxx() interfaces were introudced to
>> simplify code to access PCIe Cap config space. And
>> because PCI core saves the PCIe Cap offset in
>> set_pcie_port_type() when device is enumerated.
>> So we can use pci_is_pcie() instead.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> Cc: Jiang Liu <jiang.liu@huawei.com>
>> Cc: Anil Gurumurthy <agurumur@brocade.com>
>> Cc: Vijaya Mohan Guvva <vmohan@brocade.com>
>> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
>> Cc: linux-scsi@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> drivers/scsi/bfa/bfad.c | 9 +++------
>> 1 files changed, 3 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
>> index 9611195..d726b81 100644
>> --- a/drivers/scsi/bfa/bfad.c
>> +++ b/drivers/scsi/bfa/bfad.c
>> @@ -767,7 +767,6 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
>>
>> /* Adjust PCIe Maximum Read Request Size */
>> if (pcie_max_read_reqsz > 0) {
>> - int pcie_cap_reg;
>> u16 pcie_dev_ctl;
>> u16 mask = 0xffff;
>>
>> @@ -794,10 +793,8 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
>> break;
>> }
>>
>> - pcie_cap_reg = pci_find_capability(pdev, PCI_CAP_ID_EXP);
>> - if (mask != 0xffff && pcie_cap_reg) {
>> - pcie_cap_reg += 0x08;
>> - pci_read_config_word(pdev, pcie_cap_reg, &pcie_dev_ctl);
>> + if (mask != 0xffff && pci_is_pcie(pdev)) {
>
> Please move the pci_is_pcie() test up to the
> "if (pcie_mas_read_reqsz ..." statement. There's no point in doing
> the switch statement if this isn't a PCIe device.
>
>> + pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &pcie_dev_ctl);
>> if ((pcie_dev_ctl & 0x7000) != mask) {

I forgot to mention that this 0x7000 constant should be
PCI_EXP_DEVCTL_READRQ instead.

>> printk(KERN_WARNING "BFA[%s]: "
>> "pcie_max_read_request_size is %d, "
>> @@ -806,7 +803,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
>> pcie_max_read_reqsz);
>>
>> pcie_dev_ctl &= ~0x7000;
>> - pci_write_config_word(pdev, pcie_cap_reg,
>> + pcie_capability_write_word(pdev, PCI_EXP_DEVCTL,
>> pcie_dev_ctl | mask);
>
> Please rework this to use pcie_set_readrq() instead of writing
> the capability directly. If we write the capability directly, we
> risk writing a value that is incompatible with the MPS
> configuration done by the PCI core.
>
>> }
>> }
>> --
>> 1.7.1
>>
>>


\
 
 \ /
  Last update: 2013-09-04 05:01    [W:1.569 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site