lkml.org 
[lkml]   [2013]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] audit: fix soft lockups due to loop in audit_log_start() wh,en audit_backlog_limit exceeded
Reviewed this before seeing Luiz' patch, so this is not an endorsement
of one approach over the other, but adding my ack.

Shaggy

On 09/02/2013 10:49 PM, Chuck Anderson wrote:
> audit: fix softlockups due to loop in audit_log_start() when
> audit_backlog_limit exceeded
>
> author: Dan Duval <dan.duval@oracle.com>
>
> This patch fixes a bug in kernel/audit that can cause many soft lockups
> and prevent the boot of a large memory 3.8 system:
>
> BUG: soft lockup - CPU#66 stuck for 22s! [udevd:9559]
> RIP: 0010:[<ffffffff810d1d06>] [<ffffffff810d1d06>]
> audit_log_start+0xe6/0x350
> Call Trace:
> [<ffffffff8108ea30>] ? try_to_wake_up+0x2d0/0x2d0
> [<ffffffff810d8d6f>] audit_log_exit+0x3f/0x590
> [<ffffffff810d975d>] __audit_syscall_exit+0x28d/0x2c0
> [<ffffffff815e0440>] sysret_audit+0x17/0x21
>
> audit_log_start() will call wait_for_auditd() to delay returning an
> audit_buffer if there are too many SKBs on audit_skb_queue.
> wait_for_auditd() puts itself on the audit_backlog_wait queue and
> sleeps for sleep_time jiffies or until it is (normally) woken when
> kauditd takes an SKB off of audit_skb_queue. wait_for_auditd() returns
> to audit_log_start() which checks to see if audit_skb_queue still has
> too many SKBs. If there are still too many, audit_log_start() will
> continue to call wait_for_auditd() in a loop until
> audit_backlog_wait_time has passed. audit_log_start() will then
> complain ("backlog limit exceeded"); set audit_backlog_wait_time
> to NULL so other waiters will fall out of the loop when woken up; wake
> up any waiters in wait_for_auditd(); return NULL which tells the caller
> that an audit_buffer could not be allocated.
>
> A bug in audit_log_start() prevents it from breaking out of the
> wait_for_auditd() loop when audit_backlog_wait_time has passed.
> Instead, it will loop in the audit_skb_queue-is-too-long while-loop
> eventually causing a soft lockup. There can (and most likely will)
> be multiple threads looping. The fix is to continue in the while-loop
> only if sleep_time was greater than 0 (audit_backlog_wait_time has not
> passed).
>
> Another bug in audit_log_start() prevents audit_backlog_wait_time from
> working as expected. audit_backlog_wait_time is normally the time
> period that audit_log_start() will wait for the number of SKBs on
> audit_skb_queue to fall below the too-many threshold. If
> audit_backlog_wait_time passes, audit_log_start() will set it to
> audit_backlog_wait_overflow, which is zero, and wake up any waiters in
> wait_for_auditd(). audit_backlog_wait_time is now zero so the waiters
> will fall out of the loop when they return to audit_log_start(). That
> is expected behavior. But audit_backlog_wait_time is not reset to its
> initial value when audit_skb_queue's length is no longer too long.
> Subsequent calls to audit_log_start() when audit_skb_queue is too long
> will not wait in wait_for_auditd(), instead returning NULL. The fix
> is to set audit_backlog_wait_time to its initial value when
> audit_skb_queue passes the size test, potentially resetting it.
>
> A third issue is to have both audit_log_start() and wait_for_auditd()
> use the same limit value for the length of audit_skb_queue. It isn't
> necessary today but (1) assumptions may change in the future and (2)
> is one less oddity for a reader to have to verify.
>
> Signed-off-by: Dan Duval <dan.duval@oracle.com>
> Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
> ---
> kernel/audit.c | 28 ++++++++++++++++------------
> 1 files changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/kernel/audit.c b/kernel/audit.c
> index 91e53d0..9a78dde 100644
> --- a/kernel/audit.c
> +++ b/kernel/audit.c
> @@ -103,9 +103,11 @@ static int audit_rate_limit;
>
> /* Number of outstanding audit_buffers allowed. */
> static int audit_backlog_limit = 64;
> -static int audit_backlog_wait_time = 60 * HZ;
> static int audit_backlog_wait_overflow = 0;
>
> +#define AUDIT_BACKLOG_WAIT_TIME (60 * HZ)
> +static int audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
> +
> /* The identity of the user shutting down the audit system. */
> kuid_t audit_sig_uid = INVALID_UID;
> pid_t audit_sig_pid = -1;
> @@ -1053,14 +1055,14 @@ static inline void audit_get_stamp(struct
> audit_context
> *ctx,
> /*
> * Wait for auditd to drain the queue a little
> */
> -static void wait_for_auditd(unsigned long sleep_time)
> +static void wait_for_auditd(unsigned long sleep_time, int limit)
> {
> DECLARE_WAITQUEUE(wait, current);
> set_current_state(TASK_UNINTERRUPTIBLE);
> add_wait_queue(&audit_backlog_wait, &wait);
>
> if (audit_backlog_limit &&
> - skb_queue_len(&audit_skb_queue) > audit_backlog_limit)
> + skb_queue_len(&audit_skb_queue) > limit)
> schedule_timeout(sleep_time);
>
> __set_current_state(TASK_RUNNING);
> @@ -1095,8 +1097,8 @@ struct audit_buffer *audit_log_start(struct
> audit_context
> *ctx, gfp_t gfp_mask,
> struct audit_buffer *ab = NULL;
> struct timespec t;
> unsigned int uninitialized_var(serial);
> - int reserve;
> unsigned long timeout_start = jiffies;
> + int limit;
>
> if (audit_initialized != AUDIT_INITIALIZED)
> return NULL;
> @@ -1104,22 +1106,22 @@ struct audit_buffer *audit_log_start(struct
> audit_contex
> t *ctx, gfp_t gfp_mask,
> if (unlikely(audit_filter_type(type)))
> return NULL;
>
> - if (gfp_mask & __GFP_WAIT)
> - reserve = 0;
> - else
> - reserve = 5; /* Allow atomic callers to go up to five
> + limit = audit_backlog_limit;
> + if (!(gfp_mask & __GFP_WAIT))
> + limit += 5; /* Allow atomic callers to go up to five
> entries over the normal backlog limit */
>
> while (audit_backlog_limit
> - && skb_queue_len(&audit_skb_queue) > audit_backlog_limit +
> reserv
> e) {
> + && skb_queue_len(&audit_skb_queue) > limit) {
> if (gfp_mask & __GFP_WAIT && audit_backlog_wait_time) {
> unsigned long sleep_time;
>
> sleep_time = timeout_start + audit_backlog_wait_time -
> jiffies;
> - if ((long)sleep_time > 0)
> - wait_for_auditd(sleep_time);
> - continue;
> + if ((long)sleep_time > 0) {
> + wait_for_auditd(sleep_time, limit);
> + continue;
> + }
> }
> if (audit_rate_check() && printk_ratelimit())
> printk(KERN_WARNING
> @@ -1133,6 +1135,8 @@ struct audit_buffer *audit_log_start(struct
> audit_context
> *ctx, gfp_t gfp_mask,
> return NULL;
> }
>
> + audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
> +
> ab = audit_buffer_alloc(ctx, gfp_mask, type);
> if (!ab) {
> audit_log_lost("out of memory in audit_log_start");


\
 
 \ /
  Last update: 2013-09-03 21:21    [W:0.057 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site