lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv2 2/9] hwspinlock/omap: add support for dt nodes
From
Date

On Sep 17, 2013, at 2:30 PM, Suman Anna wrote:

> HwSpinlock IP is present only on OMAP4 and other newer SoCs,
> which are all device-tree boot only. This patch adds the
> base support for parsing the DT nodes, and removes the code
> dealing with the traditional platform device instantiation.
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> ---
> .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 31 +++++++++++
> arch/arm/mach-omap2/Makefile | 3 --
> arch/arm/mach-omap2/hwspinlock.c | 60 ----------------------
> drivers/hwspinlock/omap_hwspinlock.c | 23 +++++++--
> 4 files changed, 50 insertions(+), 67 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> delete mode 100644 arch/arm/mach-omap2/hwspinlock.c
>
> diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> new file mode 100644
> index 0000000..235b7c5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> @@ -0,0 +1,31 @@
> +OMAP4+ HwSpinlock Driver
> +========================
> +
> +Required properties:
> +- compatible: Currently supports only "ti,omap4-hwspinlock" for
> + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
> +- reg: Contains the hwspinlock register address range (base
> + address and length)
> +- ti,hwmods: Name of the hwmod associated with the hwspinlock device
> +
> +Common hwlock properties:
> +The following describes the usage of the common hwlock properties (defined in
> +Documentation/devicetree/bindings/hwlock/hwlock.txt) on OMAP.
> +
> +- hwlock-base-id: There are currently no OMAP SoCs with multiple
> + hwspinlock devices. The OMAP driver uses a default
> + base id value of 0 for the locks present within the
> + single hwspinlock device on all SoCs.
> +- hwlock-num-locks: This property is not required on OMAP SoCs, since the
> + number of locks present within a device can be deduced
> + from the SPINLOCK_SYSSTATUS device register.

If you are going to be explicit about this properties, you should probably be a bit more clear about them NOT being in the OMAP dts because of the reasons you specify.

> +
> +
> +Example:
> +
> +/* OMAP4 */
> +hwspinlock: spinlock@4a0f6000 {
> + compatible = "ti,omap4-hwspinlock";
> + reg = <0x4a0f6000 0x1000>;
> + ti,hwmods = "spinlock";
> +};

- k

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation



\
 
 \ /
  Last update: 2013-09-27 18:21    [W:0.211 / U:39.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site