lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux-next: manual merge of the omap_dss2 tree with the fbdev tree
Hi Tomi,

Today's linux-next merge of the omap_dss2 tree got a conflict in
drivers/video/atmel_lcdfb.c between commit 5e8be022fb5b ("video:
atmel_lcdfb: add device tree suport") from the fbdev tree and commit
a36bf1925539 ("video: atmel_lcdfb: Remove redundant dev_set_drvdata")
from the omap_dss2 tree.

I fixed it up (see below) and can carry the fix as necessary (no action
is required).

--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au

diff --cc drivers/video/atmel_lcdfb.c
index bf9c5d0,3f7d6dc..0000000
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@@ -1157,30 -934,19 +1157,30 @@@ static int __init atmel_lcdfb_probe(str
}

sinfo = info->par;
+ sinfo->pdev = pdev;
+ sinfo->info = info;
+
+ INIT_LIST_HEAD(&info->modelist);

- if (dev_get_platdata(dev)) {
- pdata_sinfo = dev_get_platdata(dev);
- sinfo->default_bpp = pdata_sinfo->default_bpp;
- sinfo->default_dmacon = pdata_sinfo->default_dmacon;
- sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
- sinfo->default_monspecs = pdata_sinfo->default_monspecs;
- sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
- sinfo->guard_time = pdata_sinfo->guard_time;
- sinfo->smem_len = pdata_sinfo->smem_len;
- sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
- sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
- sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
+ if (pdev->dev.of_node) {
+ ret = atmel_lcdfb_of_init(sinfo);
+ if (ret)
+ goto free_info;
- } else if (dev->platform_data) {
++ } else if (dev_get_platdata(dev)) {
+ struct fb_monspecs *monspecs;
+ int i;
+
- pdata = dev->platform_data;
++ pdata = dev_get_platdata(dev);
+ monspecs = pdata->default_monspecs;
+ sinfo->pdata = *pdata;
+
+ for (i = 0; i < monspecs->modedb_len; i++)
+ fb_add_videomode(&monspecs->modedb[i], &info->modelist);
+
+ sinfo->config = atmel_lcdfb_get_config(pdev);
+
+ info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+ memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs));
} else {
dev_err(dev, "cannot get default configuration\n");
goto free_info;
@@@ -1305,11 -1089,16 +1305,11 @@@
ret = register_framebuffer(info);
if (ret < 0) {
dev_err(dev, "failed to register framebuffer device: %d\n", ret);
- goto reset_drvdata;
+ goto free_cmap;
}

- /* add selected videomode to modelist */
- fb_var_to_videomode(&fbmode, &info->var);
- fb_add_videomode(&fbmode, &info->modelist);
-
/* Power up the LCDC screen */
- if (sinfo->atmel_lcdfb_power_control)
- sinfo->atmel_lcdfb_power_control(1);
+ atmel_lcdfb_power_control(sinfo, 1);

dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-09-27 08:21    [W:0.043 / U:89.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site