lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ll_temac: Reset dma descriptors on ndo_open
Date
The dma descriptors are only initialized on the probe function.

If a packet is on the buffer when temac_stop is called, the dma
descriptors can be left on a incorrect status where no other package can
be sent.

So an interface could be left in an usable state after ifdow/ifup.

This patch makes sure that the descriptors are in a proper status when
the device is started.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index b88121f..8bae87f 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -229,6 +229,25 @@ static void temac_dma_bd_release(struct net_device *ndev)
}

/**
+ * temac_dma_bd_reset - Reset buffer descriptor rings
+ */
+static void temac_dma_bd_reset(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ int i;
+
+ for (i = 0; i < TX_BD_NUM; i++)
+ lp->tx_bd_v[i].app0 = 0;
+
+ lp->tx_bd_ci = 0;
+ lp->tx_bd_next = 0;
+ lp->tx_bd_tail = 0;
+ lp->rx_bd_ci = 0;
+
+ return;
+}
+
+/**
* temac_dma_bd_init - Setup buffer descriptor rings
*/
static int temac_dma_bd_init(struct net_device *ndev)
@@ -864,6 +883,8 @@ static int temac_open(struct net_device *ndev)
if (rc)
goto err_rx_irq;

+ temac_dma_bd_reset(ndev);
+
return 0;

err_rx_irq:
--
1.8.4.rc3


\
 
 \ /
  Last update: 2013-09-27 13:41    [W:0.037 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site