lkml.org 
[lkml]   [2013]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv4 07/18] hwmon: lm75: expose to thermal fw via DT nodes
Date
This patch adds to lm75 temperature sensor the possibility
to expose itself as thermal zone device, registered on the
thermal framework.

The thermal zone is built only if a device tree node
describing a thermal zone for this sensor is present
inside the lm75 DT node. Otherwise, the driver behavior
will be the same.

Cc: Jean Delvare <khali@linux-fr.org>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/hwmon/lm75.c | 35 ++++++++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index c03b490..1d3600a 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -27,6 +27,8 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
#include "lm75.h"


@@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = {
/* Each client has this additional data */
struct lm75_data {
struct device *hwmon_dev;
+ struct thermal_zone_device *tz;
struct mutex update_lock;
u8 orig_conf;
u8 resolution; /* In bits, between 9 and 12 */
@@ -90,22 +93,36 @@ static struct lm75_data *lm75_update_device(struct device *dev);

/*-----------------------------------------------------------------------*/

+static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
+{
+ return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
+}
+
/* sysfs attributes for hwmon */

+static int lm75_read_temp(void *dev, long *temp)
+{
+ struct lm75_data *data = lm75_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ *temp = lm75_reg_to_mc(data->temp[0], data->resolution);
+
+ return 0;
+}
+
static ssize_t show_temp(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct lm75_data *data = lm75_update_device(dev);
- long temp;

if (IS_ERR(data))
return PTR_ERR(data);

- temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000)
- >> (data->resolution - 8);
-
- return sprintf(buf, "%ld\n", temp);
+ return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index],
+ data->resolution));
}

static ssize_t set_temp(struct device *dev, struct device_attribute *da,
@@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
goto exit_remove;
}

+ data->tz = thermal_zone_of_sensor_register(&client->dev,
+ 0,
+ &client->dev,
+ lm75_read_temp, NULL);
+ if (IS_ERR(data->tz))
+ data->tz = NULL;
+
dev_info(&client->dev, "%s: sensor '%s'\n",
dev_name(data->hwmon_dev), client->name);

@@ -285,6 +309,7 @@ static int lm75_remove(struct i2c_client *client)
{
struct lm75_data *data = i2c_get_clientdata(client);

+ thermal_zone_of_sensor_unregister(&client->dev, data->tz);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm75_group);
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
--
1.8.2.1.342.gfa7285d


\
 
 \ /
  Last update: 2013-09-27 06:21    [W:0.427 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site