lkml.org 
[lkml]   [2013]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] pwm-backlight: allow for non-increasing brightness levels
Date
On Thursday, September 26, 2013 9:08 PM, Tomi Valkeinen wrote:
> On 26/09/13 14:51, Thierry Reding wrote:
> > On Thu, Sep 26, 2013 at 01:03:06PM +0300, Tomi Valkeinen wrote:
> > [...]
> >> But if you and Thierry think this version is good, I'll take it.
> >
> > That sounds like you want to take it through the fbdev tree. Jingoo is
> > listed (along with Richard, but he hasn't been responsive to email for
> > years) as maintainer for the backlight subsystem. Furthermore back at
>
> Ah, so they are. I just thought it falls under fbdev, as it's under
> drivers/video/ =).
>
> I don't have any particular "want" to take it through fbdev tree. But I
> can take it.
>
> > the time when I began working on the PWM subsystem, the backlight sub-
> > system was pretty much orphaned, and pwm-backlight was by far the
> > biggest user of the PWM subsystem. I adopted the driver at the time
> > because it needed to be updated for PWM subsystem changes.
> >
> > What's the plan going forward? Given the coupling between the PWM
> > subsystem and the pwm-backlight driver it might be useful to keep
> > maintaining it as part of the PWM subsystem. On the other hand, there's
> > some coupling between the driver and the backlight subsystem too.
>
> And backlight is coupled with fbdev... Which is something I don't like.

+cc Laurent Pinchart,

Yes, right.
The backlight should be de-coupled with fbdev.
I remember that Laurent Pinchart was doing this patch.

Laurent Pinchart,
Would you let us know your plan about this? :-)

>
> > I have a couple of patches queued up for 3.13 that rework parts of the
> > driver, so it'd be good to know how you guys want to handle this.
>
> Well. I'm happy if somebody wants to maintain the backlight side. In
> fact, I'd be happy if somebody would start restructuring it totally,
> it's rather messy. The link with fbdev should be removed, and some
> backlight drivers are actually panel drivers. However, perhaps Common
> Display Framework is required until it can be fully cleaned.

I think that some backlight drivers can be moved to 'Common Display Framework',
after 'Common Display Framework' is merged.
But, I am not sure, when it will be completed.

Best regards,
Jingoo Han

>
> So... For the time being, I'm fine with merging pwm-backlight via any
> tree that works best. I'm presuming here that backlight framework and
> fbdev (for the parts that are relevant for backlight) are not really
> being changed, so there shouldn't be conflicts.
>
> Tomi
>



\
 
 \ /
  Last update: 2013-09-27 06:21    [W:0.250 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site