lkml.org 
[lkml]   [2013]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v4 00/40] mm: Memory Power Management
Date
Hi,

Here is version 4 of the Memory Power Management patchset, which includes the
targeted compaction mechanism (which was temporarily removed in v3). So now
that this includes all the major features & changes to the Linux MM intended
to aid memory power management, it gives us a better picture of the extent to
which this patchset performs better than mainline, in causing memory power
savings.


Role of the Linux MM in influencing Memory Power Management:
-----------------------------------------------------------

Modern memory hardware such as DDR3 support a number of power management
capabilities - for instance, the memory controller can automatically put
memory DIMMs/banks into content-preserving low-power states, if it detects
that the *entire* memory DIMM/bank has not been referenced for a threshold
amount of time. This in turn reduces the energy consumption of the memory
hardware. We term these power-manageable chunks of memory as "Memory Regions".

To increase the power savings we need to enhance the Linux MM to understand
the granularity at which RAM modules can be power-managed, and keep the
memory allocations and references consolidated to a minimum no. of these
memory regions.

Thus, we can summarize the goals for the Linux MM as follows:

o Consolidate memory allocations and/or references such that they are not
spread across the entire memory address space, because the area of memory
that is not being referenced can reside in low power state.

o Support light-weight targeted memory compaction/reclaim, to evacuate
lightly-filled memory regions. This helps avoid memory references to
those regions, thereby allowing them to reside in low power states.


Brief overview of the design/approach used in this patchset:
-----------------------------------------------------------

The strategy used in this patchset is to do page allocation in increasing order
of memory regions (within a zone) and perform region-compaction in the reverse
order, as illustrated below.

---------------------------- Increasing region number---------------------->

Direction of allocation---> <---Direction of region-compaction


We achieve this by making 3 major design changes to the Linux kernel memory
manager, as outlined below.

1. Sorted-buddy design of buddy freelists

To allocate pages in increasing order of memory regions, we first capture
the memory region boundaries in suitable zone-level data-structures, and
modify the buddy allocator so as to maintain the buddy freelists in
region-sorted-order. This automatically ensures that page allocation occurs
in the order of increasing memory regions.

2. Split-allocator design: Page-Allocator as front-end; Region-Allocator as
back-end

Mixing of movable and unmovable pages can disrupt opportunities for
consolidating allocations. In order to separate such pages at a memory-region
granularity, a "Region-Allocator" is introduced which allocates entire memory
regions. The Page-Allocator is then modified to get its memory from the
Region-Allocator and hand out pages to requesting applications in
page-sized chunks. This design is showing significant improvements in the
effectiveness of this patchset in consolidating allocations to a minimum no.
of memory regions.

3. Targeted region compaction/evacuation

Over time, due to multiple alloc()s and free()s in random order, memory gets
fragmented, which means the memory allocations will no longer be consolidated
to a minimum no. of memory regions. In such cases we need a light-weight
mechanism to opportunistically compact memory to evacuate lightly-filled
memory regions, thereby enhancing the power-savings.

Noting that CMA (Contiguous Memory Allocator) does targeted compaction to
achieve its goals, this patchset generalizes the targeted compaction code
and reuses it to evacuate memory regions. A dedicated per-node "kmempowerd"
kthread is employed to perform this region evacuation.


Assumptions and goals of this patchset:
--------------------------------------

In this patchset, we don't handle the part of getting the region boundary info
from the firmware/bootloader and populating it in the kernel data-structures.
The aim of this patchset is to propose and brainstorm on a power-aware design
of the Linux MM which can *use* the region boundary info to influence the MM
at various places such as page allocation, reclamation/compaction etc, thereby
contributing to memory power savings. So, in this patchset, we assume a simple
model in which each 512MB chunk of memory can be independently power-managed,
and hard-code this in the kernel.

However, its not very far-fetched to try this out with actual region boundary
info to get the real power savings numbers. For example, on ARM platforms, we
can make the bootloader export this info to the OS via device-tree and then run
this patchset. (This was the method used to get the power-numbers in [4]). But
even without doing that, we can very well evaluate the effectiveness of this
patchset in contributing to power-savings, by analyzing the free page statistics
per-memory-region; and we can observe the performance impact by running
benchmarks - this is the approach currently used to evaluate this patchset.


Experimental Results:
====================

In a nutshell here are the results (higher the better):

Free regions at test-start Free regions after test-run
Without patchset 214 8
With patchset 210 202

This shows that this patchset performs enormously better than mainline, in
terms of keeping allocations consolidated to a minimum no. of regions.

I'll include the detailed results as a reply to this cover-letter, since it
can benefit from a dedicated discussion.

This patchset has been hosted in the below git tree. It applies cleanly on
v3.12-rc2.

git://github.com/srivatsabhat/linux.git mem-power-mgmt-v4


Changes in v4:
=============

* Revived and redesigned the targeted region compaction code. Added a dedicated
per-node kthread to perform the evacuation, instead of the workqueue worker
used in the previous design.
* Redesigned the locking scheme in the targeted evacuation code to be much
more simple and elegant.
* Fixed a bug pointed out by Yasuaki Ishimatsu.
* Got much better results (consolidation ratio) than v3, due to the addition of
the targeted compaction logic. [ v3 used to get us to around 120, whereas
this v4 is going up to 202! :-) ].


Some important TODOs:
====================

1. Add optimizations to improve the performance and reduce the overhead in
the MM hot paths.

2. Add support for making this patchset work with sparsemem, THP, memcg etc.


References:
----------

[1]. LWN article that explains the goals and the design of my Memory Power
Management patchset:
http://lwn.net/Articles/547439/

[2]. v3 of the Memory Power Management patchset, with a new split-allocator
design:
http://lwn.net/Articles/565371/

[3]. v2 of the "Sorted-buddy" patchset with support for targeted memory
region compaction:
http://lwn.net/Articles/546696/

LWN article describing this design: http://lwn.net/Articles/547439/

v1 of the patchset:
http://thread.gmane.org/gmane.linux.power-management.general/28498

[4]. Estimate of potential power savings on Samsung exynos board
http://article.gmane.org/gmane.linux.kernel.mm/65935

[5]. C. Lefurgy, K. Rajamani, F. Rawson, W. Felter, M. Kistler, and Tom Keller.
Energy management for commercial servers. In IEEE Computer, pages 39–48,
Dec 2003.
Link: researcher.ibm.com/files/us-lefurgy/computer2003.pdf

[6]. ACPI 5.0 and MPST support
http://www.acpi.info/spec.htm
Section 5.2.21 Memory Power State Table (MPST)

[7]. Prototype implementation of parsing of ACPI 5.0 MPST tables, by Srinivas
Pandruvada.
https://lkml.org/lkml/2013/4/18/349


Srivatsa S. Bhat (40):
mm: Introduce memory regions data-structure to capture region boundaries within nodes
mm: Initialize node memory regions during boot
mm: Introduce and initialize zone memory regions
mm: Add helpers to retrieve node region and zone region for a given page
mm: Add data-structures to describe memory regions within the zones' freelists
mm: Demarcate and maintain pageblocks in region-order in the zones' freelists
mm: Track the freepage migratetype of pages accurately
mm: Use the correct migratetype during buddy merging
mm: Add an optimized version of del_from_freelist to keep page allocation fast
bitops: Document the difference in indexing between fls() and __fls()
mm: A new optimized O(log n) sorting algo to speed up buddy-sorting
mm: Add support to accurately track per-memory-region allocation
mm: Print memory region statistics to understand the buddy allocator behavior
mm: Enable per-memory-region fragmentation stats in pagetypeinfo
mm: Add aggressive bias to prefer lower regions during page allocation
mm: Introduce a "Region Allocator" to manage entire memory regions
mm: Add a mechanism to add pages to buddy freelists in bulk
mm: Provide a mechanism to delete pages from buddy freelists in bulk
mm: Provide a mechanism to release free memory to the region allocator
mm: Provide a mechanism to request free memory from the region allocator
mm: Maintain the counter for freepages in the region allocator
mm: Propagate the sorted-buddy bias for picking free regions, to region allocator
mm: Fix vmstat to also account for freepages in the region allocator
mm: Drop some very expensive sorted-buddy related checks under DEBUG_PAGEALLOC
mm: Connect Page Allocator(PA) to Region Allocator(RA); add PA => RA flow
mm: Connect Page Allocator(PA) to Region Allocator(RA); add PA <= RA flow
mm: Update the freepage migratetype of pages during region allocation
mm: Provide a mechanism to check if a given page is in the region allocator
mm: Add a way to request pages of a particular region from the region allocator
mm: Modify move_freepages() to handle pages in the region allocator properly
mm: Never change migratetypes of pageblocks during freepage stealing
mm: Set pageblock migratetype when allocating regions from region allocator
mm: Use a cache between page-allocator and region-allocator
mm: Restructure the compaction part of CMA for wider use
mm: Add infrastructure to evacuate memory regions using compaction
kthread: Split out kthread-worker bits to avoid circular header-file dependency
mm: Add a kthread to perform targeted compaction for memory power management
mm: Add a mechanism to queue work to the kmempowerd kthread
mm: Add intelligence in kmempowerd to ignore regions unsuitable for evacuation
mm: Add triggers in the page-allocator to kick off region evacuation

arch/x86/include/asm/bitops.h | 4
include/asm-generic/bitops/__fls.h | 5
include/linux/compaction.h | 7
include/linux/gfp.h | 2
include/linux/kthread-work.h | 92 +++
include/linux/kthread.h | 85 ---
include/linux/migrate.h | 3
include/linux/mm.h | 43 ++
include/linux/mmzone.h | 87 +++
include/trace/events/migrate.h | 3
mm/compaction.c | 309 +++++++++++
mm/internal.h | 45 ++
mm/page_alloc.c | 1018 ++++++++++++++++++++++++++++++++----
mm/vmstat.c | 130 ++++-
14 files changed, 1637 insertions(+), 196 deletions(-)
create mode 100644 include/linux/kthread-work.h


Regards,
Srivatsa S. Bhat
IBM Linux Technology Center

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-09-26 01:41    [W:0.238 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site