lkml.org 
[lkml]   [2013]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] USB: gadget: s3c-hsotg: add isochronous transfers support
Date
This patch adds isochronous transfer support. It adds few modifications:
- Modify s3c_hsotg_write_fifo() function. It actually calculates transfer
size, taking into account Multi Count value, which indicates number of
transactions per microframe.
- Fix s3c_hsotg_start_req() function by setting number of packets to Multi
Count field in DIEPTSIZ register for isochronous endpoints.
- Fix s3c_hsotg_set_ep_maxpacket() function. Field wMaxPacketSize of endpoint
descriptor is now splitted into maximum packet size value and number of
additional transaction per microframe.
- Modify s3c_hsotg_epint() function. Some interrupts are ignored for
isochronous endpoints, (e.g. INTknTXFEmpMsk) becouse isochronous request is
always transfered in single transaction, which ends with XferCompl interrupt.
Add Odd/Even microframe toggle to allow data transfering in each microframe.
- Fix s3c_hsotg_ep_enable() function by supporting isochronous endpoint type.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/usb/gadget/s3c-hsotg.c | 74 +++++++++++++++++++++++++++++++---------
1 file changed, 57 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index d5d951d..d737452 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -82,9 +82,12 @@ struct s3c_hsotg_req;
* @dir_in: Set to true if this endpoint is of the IN direction, which
* means that it is sending data to the Host.
* @index: The index for the endpoint registers.
+ * @mc: Multi Count - number of transactions per microframe
+ * @interval - Interval for periodic endpoints
* @name: The name array passed to the USB core.
* @halted: Set if the endpoint has been halted.
* @periodic: Set if this is a periodic ep, such as Interrupt
+ * @insochronous: Set if this is a isochronous ep
* @sent_zlp: Set if we've sent a zero-length packet.
* @total_data: The total number of data bytes done.
* @fifo_size: The size of the FIFO (for periodic IN endpoints)
@@ -120,9 +123,12 @@ struct s3c_hsotg_ep {

unsigned char dir_in;
unsigned char index;
+ unsigned char mc;
+ unsigned char interval;

unsigned int halted:1;
unsigned int periodic:1;
+ unsigned int isochronous:1;
unsigned int sent_zlp:1;

char name[10];
@@ -467,6 +473,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
void *data;
int can_write;
int pkt_round;
+ int max_transfer;

to_write -= (buf_pos - hs_ep->last_load);

@@ -534,15 +541,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
can_write *= 4; /* fifo size is in 32bit quantities. */
}

- dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
- __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+ max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+ dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+ __func__, gnptxsts, can_write, to_write, max_transfer);

/*
* limit to 512 bytes of data, it seems at least on the non-periodic
* FIFO, requests of >512 cause the endpoint to get stuck with a
* fragment of the end of the transfer in it.
*/
- if (can_write > 512)
+ if (can_write > 512 && !periodic)
can_write = 512;

/*
@@ -550,8 +559,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
* the transfer to return that it did not run out of fifo space
* doing it.
*/
- if (to_write > hs_ep->ep.maxpacket) {
- to_write = hs_ep->ep.maxpacket;
+ if (to_write > max_transfer) {
+ to_write = max_transfer;

/* it's needed only when we do not use dedicated fifos */
if (!hsotg->dedicated_fifos)
@@ -564,7 +573,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,

if (to_write > can_write) {
to_write = can_write;
- pkt_round = to_write % hs_ep->ep.maxpacket;
+ pkt_round = to_write % max_transfer;

/*
* Round the write down to an
@@ -730,8 +739,16 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
else
packets = 1; /* send one packet if length is zero. */

+ if (length > (hs_ep->mc * hs_ep->ep.maxpacket) && hs_ep->isochronous) {
+ dev_err(hsotg->dev, "req length > maxpacket*mc\n");
+ return;
+ }
+
if (dir_in && index != 0)
- epsize = DxEPTSIZ_MC(1);
+ if (hs_ep->isochronous)
+ epsize = DxEPTSIZ_MC(packets);
+ else
+ epsize = DxEPTSIZ_MC(1);
else
epsize = 0;

@@ -1718,6 +1735,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
void __iomem *regs = hsotg->regs;
u32 mpsval;
+ u32 mcval;
u32 reg;

if (ep == 0) {
@@ -1725,15 +1743,19 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
mpsval = s3c_hsotg_ep0_mps(mps);
if (mpsval > 3)
goto bad_mps;
+ hs_ep->ep.maxpacket = mps;
+ hs_ep->mc = 1;
} else {
- if (mps >= DxEPCTL_MPS_LIMIT+1)
+ mpsval = mps & 0x7ff;
+ mcval = ((mps >> 11) & 0x3) + 1;
+ hs_ep->mc = mcval;
+ if (mcval > 3) {
+ hs_ep->mc = 1;
goto bad_mps;
-
- mpsval = mps;
+ }
+ hs_ep->ep.maxpacket = mpsval;
}

- hs_ep->ep.maxpacket = mps;
-
/*
* update both the in and out endpoint controldir_ registers, even
* if one of the directions may not be in use.
@@ -1915,8 +1937,10 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
u32 ints;
+ u32 ctrl;

ints = readl(hsotg->regs + epint_reg);
+ ctrl = readl(hsotg->regs + epctl_reg);

/* Clear endpoint interrupts */
writel(ints, hsotg->regs + epint_reg);
@@ -1925,6 +1949,14 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
__func__, idx, dir_in ? "in" : "out", ints);

if (ints & DxEPINT_XferCompl) {
+ if (hs_ep->isochronous && hs_ep->interval == 1) {
+ if (ctrl & DxEPCTL_EOFrNum)
+ ctrl |= DxEPCTL_SetEvenFr;
+ else
+ ctrl |= DxEPCTL_SetOddFr;
+ writel(ctrl, hsotg->regs + epctl_reg);
+ }
+
dev_dbg(hsotg->dev,
"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
__func__, readl(hsotg->regs + epctl_reg),
@@ -1991,7 +2023,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
if (ints & DxEPINT_Back2BackSetup)
dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);

- if (dir_in) {
+ if (dir_in && !hs_ep->isochronous) {
/* not sure if this is important, but we'll clear it anyway */
if (ints & DIEPMSK_INTknTXFEmpMsk) {
dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
@@ -2613,17 +2645,25 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
epctrl |= DxEPCTL_SNAK;

/* update the endpoint state */
- hs_ep->ep.maxpacket = mps;
+ s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);

/* default, set to non-periodic */
+ hs_ep->isochronous = 0;
hs_ep->periodic = 0;
hs_ep->halted = 0;
+ hs_ep->interval = desc->bInterval;
+
+ if (hs_ep->interval > 1 && hs_ep->mc > 1)
+ dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");

switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
- dev_err(hsotg->dev, "no current ISOC support\n");
- ret = -EINVAL;
- goto out;
+ epctrl |= DxEPCTL_EPType_Iso;
+ epctrl |= DxEPCTL_SetEvenFr;
+ hs_ep->isochronous = 1;
+ if (dir_in)
+ hs_ep->periodic = 1;
+ break;

case USB_ENDPOINT_XFER_BULK:
epctrl |= DxEPCTL_EPType_Bulk;
--
1.7.9.5


\
 
 \ /
  Last update: 2013-09-23 10:21    [W:0.066 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site