lkml.org 
[lkml]   [2013]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] mfd: arizona: Add device tree bindings for MICBIAS generators
Date
Add device tree bindings for the pdata needed to configure the MICBIAS
generators.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 15 ++++++++++++
drivers/mfd/arizona-core.c | 25 +++++++++++++++++++++
2 files changed, 40 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 09e384c..20730dd 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -64,6 +64,19 @@ Optional properties:
The third cell represents the value of the micd-pol-gpio pin, a non-zero
value indicates this should be on

+ - wlf,micbias1 : Configuration for the micbias regulator, should include 5
+ cells.
+ The first cell is the output voltage in millivolts
+ The second cell a non-zero value indicates an external capacitor is fitted
+ The third cell a non-zero value indicates the micbias should be actively
+ discharged
+ The four cell a non-zero value indicates that the micbias should be
+ brought up slowly to reduce pops
+ The fifth cell a non-zero value indicates the micbias should be bypassed
+ and simply output MICVDD
+ - wlf,micbias2 : See wlf,micbias1
+ - wlf,micbias3 : See wlf,micbias1
+
- wlf,gpio-defaults : A list of GPIO configuration register values. If
absent, no configuration of these registers is performed. If any
entry has a value that is out of range for a 16 bit register then
@@ -106,6 +119,8 @@ codec: wm5102@1a {
0x0 2 1
>;

+ wlf,micbias2 = <2600 0 1 1 0>;
+
wlf,gpio-defaults = <
0x00000000 /* AIF1TXLRCLK */
0xffffffff
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index c8f30c4..6236e16 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -706,6 +706,27 @@ static int arizona_of_get_micd_configs(struct arizona *arizona,
error:
devm_kfree(arizona->dev, micd_configs);
dev_err(arizona->dev, "DT property %s is malformed: %d\n", prop, ret);
+
+ return ret;
+}
+
+static int arizona_of_get_micbias(struct arizona *arizona,
+ const char *prop, int index)
+{
+ int ret;
+ u32 micbias_config[5];
+
+ ret = arizona_of_read_u32_array(arizona, prop, false,
+ micbias_config,
+ ARRAY_SIZE(micbias_config));
+ if (ret >= 0) {
+ arizona->pdata.micbias[index].mV = micbias_config[0];
+ arizona->pdata.micbias[index].ext_cap = micbias_config[1];
+ arizona->pdata.micbias[index].discharge = micbias_config[2];
+ arizona->pdata.micbias[index].soft_start = micbias_config[3];
+ arizona->pdata.micbias[index].bypass = micbias_config[4];
+ }
+
return ret;
}

@@ -741,6 +762,10 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
arizona_of_get_micd_ranges(arizona, "wlf,micd-ranges");
arizona_of_get_micd_configs(arizona, "wlf,micd-configs");

+ arizona_of_get_micbias(arizona, "wlf,micbias1", 0);
+ arizona_of_get_micbias(arizona, "wlf,micbias2", 1);
+ arizona_of_get_micbias(arizona, "wlf,micbias3", 2);
+
arizona_of_get_gpio_defaults(arizona, "wlf,gpio-defaults");

arizona_of_read_u32_array(arizona, "wlf,max-channels-clocked",
--
1.7.2.5


\
 
 \ /
  Last update: 2013-09-23 23:21    [W:0.145 / U:3.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site