lkml.org 
[lkml]   [2013]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] mmc: mvsdio: fix deferred probe from __init
Date
Move probe out of __init section and don't use platform_driver_probe
which cannot be used with deferred probing.

Since commit e9354576 ("gpiolib: Defer failed gpio requests by default")
this driver might return -EPROBE_DEFER if the mmc_gpio_request_cd fails.

Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
drivers/mmc/host/mvsdio.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 06c5b0b..deecee0 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -655,7 +655,7 @@ static const struct mmc_host_ops mvsd_ops = {
.enable_sdio_irq = mvsd_enable_sdio_irq,
};

-static void __init
+static void
mv_conf_mbus_windows(struct mvsd_host *host,
const struct mbus_dram_target_info *dram)
{
@@ -677,7 +677,7 @@ mv_conf_mbus_windows(struct mvsd_host *host,
}
}

-static int __init mvsd_probe(struct platform_device *pdev)
+static int mvsd_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mmc_host *mmc = NULL;
@@ -819,7 +819,7 @@ out:
return ret;
}

-static int __exit mvsd_remove(struct platform_device *pdev)
+static int mvsd_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);

@@ -872,7 +872,8 @@ static const struct of_device_id mvsdio_dt_ids[] = {
MODULE_DEVICE_TABLE(of, mvsdio_dt_ids);

static struct platform_driver mvsd_driver = {
- .remove = __exit_p(mvsd_remove),
+ .probe = mvsd_probe,
+ .remove = mvsd_remove,
.suspend = mvsd_suspend,
.resume = mvsd_resume,
.driver = {
@@ -881,7 +882,7 @@ static struct platform_driver mvsd_driver = {
},
};

-module_platform_driver_probe(mvsd_driver, mvsd_probe);
+module_platform_driver(mvsd_driver);

/* maximum card clock frequency (default 50MHz) */
module_param(maxfreq, int, 0);
--
1.8.3.2


\
 
 \ /
  Last update: 2013-09-23 17:01    [W:0.163 / U:2.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site