lkml.org 
[lkml]   [2013]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] drivers: net: vmxnet3 : vmxnet3_drv.c: removed checkaptch warning related to msleep()
Date
replaced msleep(1) by usleep_range(1000,1500). Documentation/timers/timers_howto.txt
suggests use of usleep_range() in place of msleep() where desired delay is of range
1-20 ms.

Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 7e2788c..34fd6b6 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2608,7 +2608,7 @@ vmxnet3_close(struct net_device *netdev)
* completion.
*/
while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 1500);

vmxnet3_quiesce_dev(adapter);

@@ -2656,7 +2656,7 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
* completion.
*/
while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 1500);

if (netif_running(netdev)) {
vmxnet3_quiesce_dev(adapter);
--
1.7.9.5


\
 
 \ /
  Last update: 2013-09-22 18:41    [W:0.035 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site