lkml.org 
[lkml]   [2013]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/5] regmap: add helper macro to set min/max range of register
Date
Add helper macro to set the min and max value of the register range.

This is useful when initialising the register ranges of the device like

static const struct regmap_range readable_ranges[] = {
regmap_reg_range(DEVICE_REG0, DEVICE_REG10),
};

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
As per Mark's comment on V1 series, adding the macro in header in place
of defining in driver.
This should go on same tree as 2/5.

include/linux/regmap.h | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4c8c20a..047e8dc 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -70,6 +70,8 @@ struct regmap_range {
unsigned int range_max;
};

+#define regmap_reg_range(low, high) { .range_min = low, .range_max = high, }
+
/*
* A table of ranges including some yes ranges and some no ranges.
* If a register belongs to a no_range, the corresponding check function
--
1.7.1.1


\
 
 \ /
  Last update: 2013-09-20 14:21    [W:0.070 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site