lkml.org 
[lkml]   [2013]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] tracing/events: Add bounce tracing to swiotbl
Hi,

I haven't got a reply in the past 2 weeks, so I would like to bump the
patch, just to make sure it haven't fell off the radar.

Zoli

On 04/09/13 21:11, Zoltan Kiss wrote:
> Ftrace is currently not able to detect when SWIOTLB has to do double buffering.
> Under Xen you can only see it indirectly in function_graph, when
> xen_swiotlb_map_page() doesn't stop after range_straddles_page_boundary(), but
> calls spinlock functions, memcpy() and xen_phys_to_bus() as well. This patch
> introduces the swiotlb:swiotlb_bounced event, which also prints out the
> following informations to help you find out why bouncing happened:
>
> dev_name: 0000:08:00.0 dma_mask=ffffffffffffffff dev_addr=9149f000 size=32768
> swiotlb_force=0
>
> If you use Xen, and (dev_addr + size + 1) > dma_mask, the buffer is out of the
> device's DMA range. If swiotlb_force == 1, you should really change the kernel
> parameters. Otherwise, the buffer is not contiguous in mfn space.
>
> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
> ---
> drivers/xen/swiotlb-xen.c | 5 +++++
> include/trace/events/swiotlb.h | 46 ++++++++++++++++++++++++++++++++++++++++
> lib/swiotlb.c | 4 ++++
> 3 files changed, 55 insertions(+)
>
> diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
> index aadffcf..67a4b77 100644
> --- a/drivers/xen/swiotlb-xen.c
> +++ b/drivers/xen/swiotlb-xen.c
> @@ -42,6 +42,9 @@
> #include <xen/page.h>
> #include <xen/xen-ops.h>
> #include <xen/hvc-console.h>
> +
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/swiotlb.h>
> /*
> * Used to do a quick range check in swiotlb_tbl_unmap_single and
> * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
> @@ -358,6 +361,8 @@ dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
> /*
> * Oh well, have to allocate and map a bounce buffer.
> */
> + trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
> +
> map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir);
> if (map == SWIOTLB_MAP_ERROR)
> return DMA_ERROR_CODE;
> diff --git a/include/trace/events/swiotlb.h b/include/trace/events/swiotlb.h
> new file mode 100644
> index 0000000..6d21410
> --- /dev/null
> +++ b/include/trace/events/swiotlb.h
> @@ -0,0 +1,46 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM swiotlb
> +
> +#if !defined(_TRACE_SWIOTLB_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_SWIOTLB_H
> +
> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(swiotlb_bounced,
> +
> + TP_PROTO(struct device *dev,
> + dma_addr_t dev_addr,
> + size_t size,
> + int swiotlb_force),
> +
> + TP_ARGS(dev, dev_addr, size, swiotlb_force),
> +
> + TP_STRUCT__entry(
> + __string( dev_name, dev_name(dev) )
> + __field( u64, dma_mask )
> + __field( dma_addr_t, dev_addr )
> + __field( size_t, size )
> + __field( int, swiotlb_force )
> + ),
> +
> + TP_fast_assign(
> + __assign_str(dev_name, dev_name(dev));
> + __entry->dma_mask = (dev->dma_mask ? *dev->dma_mask : 0);
> + __entry->dev_addr = dev_addr;
> + __entry->size = size;
> + __entry->swiotlb_force = swiotlb_force;
> + ),
> +
> + TP_printk("dev_name: %s dma_mask=%llx dev_addr=%llx "
> + "size=%zu swiotlb_force=%x",
> + __get_str(dev_name),
> + __entry->dma_mask,
> + (unsigned long long)__entry->dev_addr,
> + __entry->size,
> + __entry->swiotlb_force)
> +);
> +
> +#endif /* _TRACE_SWIOTLB_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
> diff --git a/lib/swiotlb.c b/lib/swiotlb.c
> index d23762e..d69ecbe 100644
> --- a/lib/swiotlb.c
> +++ b/lib/swiotlb.c
> @@ -38,6 +38,8 @@
> #include <linux/bootmem.h>
> #include <linux/iommu-helper.h>
>
> +#include <trace/events/swiotlb.h>
> +
> #define OFFSET(val,align) ((unsigned long) \
> ( (val) & ( (align) - 1)))
>
> @@ -726,6 +728,8 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
> if (dma_capable(dev, dev_addr, size) && !swiotlb_force)
> return dev_addr;
>
> + trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
> +
> /* Oh well, have to allocate and map a bounce buffer. */
> map = map_single(dev, phys, size, dir);
> if (map == SWIOTLB_MAP_ERROR) {
>



\
 
 \ /
  Last update: 2013-09-18 18:21    [W:0.127 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site