lkml.org 
[lkml]   [2013]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration
On 09/14/2013 01:08 AM, boris brezillon wrote:
> Hello Stephen,
>
> Le 14/09/2013 00:40, Stephen Warren a écrit :
>> On 09/13/2013 01:53 AM, Boris BREZILLON wrote:
>>> AT91 SoCs do not support per pin debounce time configuration.
>>> Instead you have to configure a debounce time which will be used for all
>>> pins of a given bank (PIOA, PIOB, ...).
...
>>> Required properties for pin configuration node:
...
>>> -DEBOUNCE_VAL (0x3fff << 17): debounce val.
>>
>> This change would break the DT ABI since it removes a feature that's
>> already present.
...
>> I suppose it's still up to the Atmel maintainers to decide whether this
>> is appropriate, or whether the impact to out-of-tree DT files would be
>> problematic.
>>
>> Assuming the DT ABI can be broken, I think I'd prefer to do so, rather
>> than take "non-alt" patch 4/4, since a per-pin DEBOUNCE_VAL clearly
>> doesn't correctly model the HW, assuming the patch description is
>> correct. I don't think arguments re: the generic pinconf debounce
>> property hold; if the Linux-specific/internal generic property doesn't
>> apply, the DT binding should not be bent to adjust to it, but should
>> rather still represent the HW itself.
>
> What about the last point in my list: "reconfigure debounce after
> startup" ?
>
> Here is an example that may be problematic:
>
> Let's say you have one device using multiple configuration of pins
> ("default", "xxx", "yyy").
> The "default" config needs a particular debounce time on a given pin and
> the "xxx" and "yyy"
> configs need different debounce time on the same pin.
>
> How would you solve this with this patch approach ?

Each state has a different pin configuration node, and hence can specify
a different debounce value. This patch has no impact on that (it just
changes whether the state-specific node specifies the debounce value in
a single standalone property, or encodes it into each entry in the pins
property, all within the same node).
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-09-16 19:01    [W:0.070 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site