lkml.org 
[lkml]   [2013]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] [scsi] enclosure: remove all possible sysfs entries before add device
From
Date
On Mon, 2013-09-09 at 14:19 +0800, Joe Jin wrote:
> When do disk pull/insert test we encountered below:
>
> WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0()
> Hardware name: SUN FIRE X4370 M2 SERVER
> sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10'
> Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_storage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache
> Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1
> Call Trace:
> [<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0
> [<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0
> [<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70
> [<ffffffff81258bd4>] ? strlcat+0x54/0x70
> [<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0
> [<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0
> [<ffffffff811dbf83>] sysfs_create_link+0x13/0x20
> [<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure]
> [<ffffffff8125325d>] ? kobject_release+0xd/0x10
> [<ffffffff812549e7>] ? kref_put+0x37/0x70
> [<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure]
> [<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses]
> [<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses]
> [<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure]
> [<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses]
> [<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses]
> [<ffffffff8125327a>] ? kobject_get+0x1a/0x30
> [<ffffffff814e8b56>] ? add_tail+0x36/0x50
> [<ffffffff81345ae4>] device_add+0x2d4/0x380
> [<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0
> [<ffffffff813682cc>] scsi_add_lun+0x41c/0x560
> [<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0
> [<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10
> [<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120
> [<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0
> [<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas]
> [<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas]
> [<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas]
> [<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas]
> [<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas]
> [<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas]
> [<ffffffff81080698>] ? add_timer+0x18/0x20
> [<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170
> [<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas]
> [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas]
> [<ffffffff8108c0d9>] process_one_work+0xf9/0x370
> [<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas]
> [<ffffffff8108ca1a>] worker_thread+0xca/0x240
> [<ffffffff8108c950>] ? manage_workers+0x90/0x90
> [<ffffffff81090ff7>] kthread+0x97/0xa0
> [<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10
> [<ffffffff81090f60>] ? kthread_bind+0x80/0x80
> [<ffffffff8150fdc0>] ? gs_change+0x13/0x13
> ---[ end trace 89a1351702ab360f ]---
>
> During our test, multipath used, each LUN has 2 paths. when adding second
> path enclousure did not check if will adding device's symlink existed or no.

The description doesn't look helpful. The problem, presumably in a
remove/re-add test that the add event gets processed before the remove
event, which is why the link is still there?

> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
> Signed-off-by: Joe Jin <joe.jin@oracle.com>
> ---
> drivers/misc/enclosure.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
> index 0e8df41..efc0e86 100644
> --- a/drivers/misc/enclosure.c
> +++ b/drivers/misc/enclosure.c
> @@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,
> if (cdev->dev)
> enclosure_remove_links(cdev);
>
> + if (dev) {

This test is pointless. Adding a NULL device is illegal.

> + char name[ENCLOSURE_NAME_SIZE];
> +
> + enclosure_link_name(cdev, name);
> + sysfs_remove_link(&dev->kobj, name);

If we're really going to force eject the device, then this should be
enclosure_remove_device(edev, dev);

How do you prevent the case for remove re-add in the same slot? Surely
in that case, with your code, the link will get removed again when the
remove gets processed, so the slot will then look empty (even though
it's not).

James




\
 
 \ /
  Last update: 2013-09-10 15:01    [W:0.084 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site