lkml.org 
[lkml]   [2013]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Re: [PATCH] [BUGFIX] crash/ioapic: Prevent crash_kexec() from deadlocking of ioapic_lock
Hi Eric and Don,

Sorry for the late reply.

(2013/08/31 9:58), Eric W. Biederman wrote:
> Don Zickus <dzickus@redhat.com> writes:
>
>> On Tue, Aug 27, 2013 at 12:41:51PM +0900, Yoshihiro YUNOMAE wrote:
>>> Hi Don,
>>>
>>> Sorry for the late reply.
>>>
>>> (2013/08/22 22:11), Don Zickus wrote:
>>>> On Thu, Aug 22, 2013 at 05:38:07PM +0900, Yoshihiro YUNOMAE wrote:
>>>>>> So, I agree with Eric, let's remove the disable_IO_APIC() stuff and keep
>>>>>> the code simpler.
>>>>>
>>>>> Thank you for commenting about my patch.
>>>>> I didn't know you already have submitted the patches for this deadlock
>>>>> problem.
>>>>>
>>>>> I can't answer definitively right now that no problems are induced by
>>>>> removing disable_IO_APIC(). However, my patch should be work well (and
>>>>> has already been merged to -tip tree). So how about taking my patch at
>>>>> first, and then discussing the removal of disabled_IO_APIC()?
>>>>
>>>> It doesn't matter to me. My orignal patch last year was similar to yours
>>>> until it was suggested that we were working around a problem which was we
>>>> shouldn't touch the IO_APIC code on panic. Then I wrote the removal of
>>>> disable_IO_APIC patch and did lots of testing on it. I don't think I have
>>>> seen any issues with it (just the removal of disabling the lapic stuff).
>>>
>>> Yes, you really did a lot of testing about this problem according to
>>> your patch(https://lkml.org/lkml/2012/1/31/391). Although you
>>> said jiffies calibration code does not need the PIT in
>>> http://lists.infradead.org/pipermail/kexec/2012-February/006017.html,
>>> I don't understand yet why we can remove disable_IO_APIC.
>>> Would you please explain about the calibration codes?
>>
>> I forgot a lot of this, Eric B. might remember more (as he was the one that
>> pointed this out initially). I believe initially the io_apic had to be in
>> a pre-configured state in order to do some early calibration of the timing
>> code. Later on, it was my understanding, that the calibration of various
>> time keeping stuff did not need the io_apic in a correct state. The code
>> might have switched to tsc instead of PIT, I forget.
>
> Yes. Alan Coxe's initial SMP port had a few cases where it still
> exepected the system to be in PIT mode during boot and it took us a
> decade or so before those assumptions were finally expunged.

Would you please tell me the commit ID or the hint like files,
functions, or when?

>> Then again looking at the output of the latest dmesg, it seems the IO APIC
>> is initialized way before the tsc is calibrated. So I am not sure what
>> needed to get done or what interrupts are needed before the IO APIC gets
>> initialized.
>
> The practical issue is that jiffies was calibrated off of the PIT timer
> if I recall. But that is all old news.

Are the jiffies calibration codes calibrate_delay()?
It seems that the jiffies calibration have not used PIT in 2005
according to 8a9e1b0.

>>> By the way, can we remove disable_IO_APIC even if an old dump capture
>>> kernel is used?
>>
>> Good question. I did a bunch of testing with RHEL-6 too, which is 2.6.32
>> based. But I think we added some IRR fixes (commit 1e75b31d638), which
>> may or may not have helped in this case. So I don't know when a kernel
>> started worked correctly during init (with the right changes). I believe
>> 2.6.32 had everything.
>
> A sufficient old and buggy dump capture kernel will fail because of bugs
> in it's startup path, but I don't think anyone cares.

OK, if the jiffies calibration problem has been fixed in the old days,
we don't need to care for the old kernel.

> The kernel startup path has been fixed for years, and disable_IO_APIC in
> crash_kexec has always been a bug work-around for deficiencies in the
> kernel's start up path (not part of the guaranteed interface).
> Furthermore every real system configuration I have encountered used the
> same kernel version for the crashdump kernel and the production kernel.
> So we should be good.

We also will be use the kdump(crashdump) kernel as the production
kernel. Should I only care for the current kernel?

Thanks,
Yoshihiro YUNOMAE

--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: yoshihiro.yunomae.ez@hitachi.com




\
 
 \ /
  Last update: 2013-09-02 05:41    [W:0.116 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site