lkml.org 
[lkml]   [2013]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: twl6040: Use regmap for register cache
On 08/31/2013 07:48 PM, Mark Brown wrote:
> From: Mark Brown <broonie@linaro.org>
>
> Rather then open coding a cache of the vibra control registers use the
> regmap cache code. Also cache the interrupt mask register, providing
> a small performance improvement for the interrupt code.
>
> Signed-off-by: Mark Brown <broonie@linaro.org>

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>
> I'm hoping to have some ASoC improvements to build on top of this (there
> is ASoC level register caching for the device) so it might make sense to
> apply this via ASoC.
>
> drivers/mfd/twl6040.c | 43 ++++++++++++++++++++++++++++++-------------
> include/linux/mfd/twl6040.h | 1 -
> 2 files changed, 30 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> index 4d8d3b7..daf6694 100644
> --- a/drivers/mfd/twl6040.c
> +++ b/drivers/mfd/twl6040.c
> @@ -58,15 +58,9 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
> int ret;
> unsigned int val;
>
> - /* Vibra control registers from cache */
> - if (unlikely(reg == TWL6040_REG_VIBCTLL ||
> - reg == TWL6040_REG_VIBCTLR)) {
> - val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
> - } else {
> - ret = regmap_read(twl6040->regmap, reg, &val);
> - if (ret < 0)
> - return ret;
> - }
> + ret = regmap_read(twl6040->regmap, reg, &val);
> + if (ret < 0)
> + return ret;
>
> return val;
> }
> @@ -77,9 +71,6 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
> int ret;
>
> ret = regmap_write(twl6040->regmap, reg, val);
> - /* Cache the vibra control registers */
> - if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
> - twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
>
> return ret;
> }
> @@ -456,9 +447,20 @@ EXPORT_SYMBOL(twl6040_get_sysclk);
> /* Get the combined status of the vibra control register */
> int twl6040_get_vibralr_status(struct twl6040 *twl6040)
> {
> + unsigned int reg;
> + int ret;
> u8 status;
>
> - status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
> + ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, &reg);
> + if (ret != 0)
> + return ret;
> + status = reg;
> +
> + ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, &reg);
> + if (ret != 0)
> + return ret;
> + status |= reg;
> +
> status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
>
> return status;
> @@ -485,12 +487,27 @@ static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
> return true;
> }
>
> +static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case TWL6040_REG_VIBCTLL:
> + case TWL6040_REG_VIBCTLR:
> + case TWL6040_REG_INTMR:
> + return false;
> + default:
> + return true;
> + }
> +}
> +
> static struct regmap_config twl6040_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> .max_register = TWL6040_REG_STATUS, /* 0x2e */
>
> .readable_reg = twl6040_readable_reg,
> + .volatile_reg = twl6040_volatile_reg,
> +
> + .cache_type = REGCACHE_RBTREE,
> };
>
> static const struct regmap_irq twl6040_irqs[] = {
> diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
> index 6dd8893..81f639b 100644
> --- a/include/linux/mfd/twl6040.h
> +++ b/include/linux/mfd/twl6040.h
> @@ -230,7 +230,6 @@ struct twl6040 {
> int audpwron;
> int power_count;
> int rev;
> - u8 vibra_ctrl_cache[2];
>
> /* PLL configuration */
> int pll;
>


--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-09-01 19:21    [W:0.075 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site