lkml.org 
[lkml]   [2013]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] Documentation: dt: hwmon: add OF document for lm90
Date
Add OF document for lm90 in Documentation/devicetree/.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
Documentation/devicetree/bindings/hwmon/lm90.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt

diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
new file mode 100644
index 0000000..8024f11
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm90.txt
@@ -0,0 +1,20 @@
+* LM90 series thermometer.
+
+Required node properties:
+- compatible: manufacture and chip name,
+ which are listed in the Documentation/hwmon/lm90
+- reg: I2C bus address of the device
+
+Optional properties:
+- vdd-supply: vdd regulator for the supply voltage. If this is not set,
+ assuming vdd is always powered.
+- interrupts: lm90 can support interrupt mode, you can set interrupt here.
+
+Example lm90 node:
+
+nct1008 {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vdd-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
--
1.7.9.5


\
 
 \ /
  Last update: 2013-08-08 09:01    [W:0.201 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site