lkml.org 
[lkml]   [2013]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/3] mfd: sec: Add clock cell for s2mps11
Date
Quoting Yadwinder Singh Brar (2013-07-07 04:44:21)
> This patch adds clock to list of mfd cells for s2mps11 and DT documentation
> for clock part.
>
> Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>

Reviewed-by: Mike Turquette <mturquette@linaro.org>

> ---
> Documentation/devicetree/bindings/mfd/s2mps11.txt | 20 ++++++++++++++++++++
> drivers/mfd/sec-core.c | 4 +++-
> 2 files changed, 23 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 36269c4..e41dd16 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -16,6 +16,21 @@ Optional properties:
> - interrupts: Interrupt specifiers for interrupt sources.
>
> Optional nodes:
> +- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
> + register these as clocks with common clock framework instantiate a sub-node
> + named "clocks". It uses the common clock binding documented in :
> + [Documentation/devicetree/bindings/clock/clock-bindings.txt]
> + - #clock-cells: should be 1.
> +
> + - The following is the list of clocks generated by the controller. Each clock
> + is assigned an identifier and client nodes use this identifier to specify
> + the clock which they consume.
> + Clock ID
> + ----------------------
> + 32KhzAP 0
> + 32KhzCP 1
> + 32KhzBT 2
> +
> - regulators: The regulators of s2mps11 that have to be instantiated should be
> included in a sub-node named 'regulators'. Regulator nodes included in this
> sub-node should be of the format as listed below.
> @@ -55,6 +70,11 @@ Example:
> compatible = "samsung,s2mps11-pmic";
> reg = <0x66>;
>
> + s2m_osc: clocks{
> + #clock-cells = 1;
> + clock-output-names = "xx", "yy", "zz";
> + };
> +
> regulators {
> ldo1_reg: LDO1 {
> regulator-name = "VDD_ABB_3.3V";
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 760da8a..eaee5ec 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -58,7 +58,9 @@ static struct mfd_cell s5m8767_devs[] = {
> static struct mfd_cell s2mps11_devs[] = {
> {
> .name = "s2mps11-pmic",
> - },
> + }, {
> + .name = "s2mps11-clk",
> + }
> };
>
> #ifdef CONFIG_OF
> --
> 1.7.0.4


\
 
 \ /
  Last update: 2013-08-07 19:41    [W:0.106 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site