lkml.org 
[lkml]   [2013]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4] drivers/rtc/rtc-palmas.c: support for backup battery charging
On Wed, Aug 07, 2013 at 11:29:52AM +0100, Laxman Dewangan wrote:
> Palmas series device like TPS65913, TPS80036 supports the backup battery
> for powering the RTC when no other energy source is available.
>
> The backup battery is optional, connected to the VBACKUP pin, and can be
> nonrechargeable or rechargeable. The rechargeable battery can be charged
> from the system supply using the backup battery charger.
>
> Add support for enabling charging of this backup battery. Also add the DT
> binding document and the new properties to have this support.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> Reviewed-by: Felipe Balbi <balbi@ti.com>
> ---
> Changes from V1:
> - Converted DT property to boolean.
> - cleanups as use "...".
> Changes from V2:
> - Correct the property name.
> Changes from V3:
> - Nit cleanups: properly capatilise the palmas to make it Palmas.
> - Added reviewed by of Felipe and Stephen.
>
> .../devicetree/bindings/rtc/rtc-palmas.txt | 29 ++++++++++++++++
> drivers/rtc/rtc-palmas.c | 35 ++++++++++++++++++++
> 2 files changed, 64 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/rtc-palmas.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
> new file mode 100644
> index 0000000..41bb445
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
> @@ -0,0 +1,29 @@
> +Palmas RTC controller bindings
> +
> +Required properties:
> +- compatible:
> + - "ti,palmas-rtc" for Palmas series of the RTC controller
> +- interrupt-parent: Parent interrupt device, must be handle of Palmas node.
> +- interrupts: Interrupt number of RTC submodule on device.
> +
> +Optional properties:
> +- ti,back-battery-charge-enable: The Palmas series device like TPS65913 or
> + TPS80036 supports the battery backup for powering the RTC when main
> + battery is removed or in very low power state. This flag will enable
> + the backup battery charging.

I don't like the wording here as it implies that an OS *must* charge the
device, rather than that it *can* charge the device. How about:

- ti,backup-battery-chargeable: There is a chargeable backup battery
present.

> +- ti,back-battery-charge-low-current: Configure lower charging current. Device
> + supports the charging current as < 100mA or >100mA. Low current will
> + set as <100mA.

This is somewhat unclear as it reads as a runtime configuration choice,
rather than some instances of the device only support being changed at
low currents (as I assume is the case?). How about:

- ti,backup-battery-low-current: The backup battery is only chargeable
at currents below 100mA.

What happens if we charge at the wrong current?

Thanks,
Mark.


\
 
 \ /
  Last update: 2013-08-07 19:01    [W:0.067 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site