lkml.org 
[lkml]   [2013]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] clk: Tegra: Add CPU0 clock driver
Date
This patch adds CPU0's clk driver for Tegra. It will be used by the generic
cpufreq-cpu0 driver to get/set cpu clk.

Most of the platform specific bits are picked from tegra-cpufreq.c.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-cpu.c | 164 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/tegra/clk-tegra30.c | 4 +
include/linux/clk/tegra.h | 1 +
4 files changed, 170 insertions(+)
create mode 100644 drivers/clk/tegra/clk-cpu.c

diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index f49fac2..0e818c0 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -10,3 +10,4 @@ obj-y += clk-super.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
+obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += clk-cpu.o
diff --git a/drivers/clk/tegra/clk-cpu.c b/drivers/clk/tegra/clk-cpu.c
new file mode 100644
index 0000000..01716d6
--- /dev/null
+++ b/drivers/clk/tegra/clk-cpu.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2013 Linaro
+ *
+ * Author: Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Responsible for setting cpu0 clk as requested by cpufreq-cpu0 driver
+ *
+ * All platform specific bits are taken from tegra-cpufreq driver.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_cpu0(_hw) container_of(_hw, struct clk_cpu0, hw)
+
+struct clk_cpu0 {
+ struct clk_hw hw;
+ spinlock_t *lock;
+};
+
+static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
+static struct clk *emc_clk;
+
+static unsigned long cpu0_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return clk_get_rate(cpu_clk);
+}
+
+static long cpu0_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *parent_rate)
+{
+ return clk_round_rate(cpu_clk, drate);
+}
+
+static int cpu0_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int ret;
+
+ /*
+ * Vote on memory bus frequency based on cpu frequency
+ * This sets the minimum frequency, display or avp may request higher
+ */
+ if (rate >= 816000000)
+ clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
+ else if (rate >= 456000000)
+ clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
+ else
+ clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+
+ /*
+ * Take an extra reference to the main pll so it doesn't turn
+ * off when we move the cpu off of it
+ */
+ clk_prepare_enable(pll_x_clk);
+
+ ret = clk_set_parent(cpu_clk, pll_p_clk);
+ if (ret) {
+ pr_err("%s: Failed to switch cpu to clock pll_p\n", __func__);
+ goto out;
+ }
+
+ if (rate == clk_get_rate(pll_p_clk))
+ goto out;
+
+ ret = clk_set_rate(pll_x_clk, rate);
+ if (ret) {
+ pr_err("Failed to change pll_x to %lu\n", rate);
+ goto out;
+ }
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_x\n");
+ goto out;
+ }
+
+out:
+ clk_disable_unprepare(pll_x_clk);
+ return ret;
+}
+
+static struct clk_ops clk_cpu0_ops = {
+ .recalc_rate = cpu0_recalc_rate,
+ .round_rate = cpu0_round_rate,
+ .set_rate = cpu0_set_rate,
+};
+
+struct clk *tegra_clk_register_cpu0(void)
+{
+ struct clk_init_data init;
+ struct clk_cpu0 *cpu0;
+ struct clk *clk;
+
+ cpu0 = kzalloc(sizeof(*cpu0), GFP_KERNEL);
+ if (!cpu0) {
+ pr_err("%s: could not allocate cpu0 clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ cpu_clk = clk_get_sys(NULL, "cpu");
+ if (IS_ERR(cpu_clk)) {
+ clk = cpu_clk;
+ goto free_mem;
+ }
+
+ pll_x_clk = clk_get_sys(NULL, "pll_x");
+ if (IS_ERR(pll_x_clk)) {
+ clk = pll_x_clk;
+ goto put_cpu_clk;
+ }
+
+ pll_p_clk = clk_get_sys(NULL, "pll_p_cclk");
+ if (IS_ERR(pll_p_clk)) {
+ clk = pll_p_clk;
+ goto put_pll_x_clk;
+ }
+
+ emc_clk = clk_get_sys("cpu", "emc");
+ if (IS_ERR(emc_clk)) {
+ clk = emc_clk;
+ goto put_pll_p_clk;
+ }
+
+ cpu0->hw.init = &init;
+
+ init.name = "cpu0";
+ init.ops = &clk_cpu0_ops;
+ init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+ init.num_parents = 0;
+
+ clk = clk_register(NULL, &cpu0->hw);
+ if (!IS_ERR(clk))
+ return clk;
+
+ clk_prepare_enable(emc_clk);
+ clk_prepare_enable(cpu_clk);
+
+ clk_put(emc_clk);
+put_pll_p_clk:
+ clk_put(pll_p_clk);
+put_pll_x_clk:
+ clk_put(pll_x_clk);
+put_cpu_clk:
+ clk_put(cpu_clk);
+free_mem:
+ kfree(cpu0);
+
+ pr_err("%s: clk register failed\n", __func__);
+
+ return NULL;
+}
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index e2c6ca0..1cabeea 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1396,6 +1396,10 @@ static void __init tegra30_super_clk_init(void)
CLK_SET_RATE_PARENT, 1, 2);
clk_register_clkdev(clk, "twd", NULL);
clks[twd] = clk;
+
+ /* cpu0 clk for cpufreq driver */
+ clk = tegra_clk_register_cpu0();
+ clk_register_clkdev(clk, NULL, "cpu0");
}

static const char *mux_pllacp_clkm[] = { "pll_a_out0", "unused", "pll_p",
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index 23a0cee..d416138 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -128,5 +128,6 @@ static inline void tegra_periph_reset_deassert(struct clk *c) {}
static inline void tegra_periph_reset_assert(struct clk *c) {}
#endif
void tegra_clocks_apply_init_table(void);
+struct clk *tegra_clk_register_cpu0(void);

#endif /* __LINUX_CLK_TEGRA_H_ */
--
1.7.12.rc2.18.g61b472e


\
 
 \ /
  Last update: 2013-08-07 17:01    [W:0.216 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site