lkml.org 
[lkml]   [2013]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 1/1] input: ideapad_slidebar: new input driver
v2: added myself as a maintainer

Sorry for previous bad-wrapped email.

ideapad_slidebar is a new driver which enables slidebars on some
Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop
Navigator under Windows)

Fixes this: https://bugzilla.kernel.org/show_bug.cgi?id=16004

Registers 'IdeaPad Slidebar' input device and
/sys/devices/platform/ideapad_slidebar/slidebar_mode
for switching slidebar's modes.

Now works on:
IdeaPad Y550, Y550P.

May work on (testing and adding new models is needed):
Ideapad Y560, Y460, Y450, Y650,
and, probably, some others.

Driver source: https://github.com/o2genum/ideapad-slidebar.git

Patch is generated against current version of the mainline kernel.

Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com>
---
MAINTAINERS | 7 +
drivers/input/misc/Kconfig | 9 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/ideapad_slidebar.c | 378 ++++++++++++++++++++++++++++++++++
4 files changed, 395 insertions(+)
create mode 100644 drivers/input/misc/ideapad_slidebar.c

diff --git a/MAINTAINERS b/MAINTAINERS
index defc053..2ff3dd8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4096,6 +4096,13 @@ W: http://launchpad.net/ideapad-laptop
S: Maintained
F: drivers/platform/x86/ideapad-laptop.c

+IDEAPAD LAPTOP SLIDEBAR DRIVER
+M: Andrey Moiseev <o2g.org.ru@gmail.com>
+L: linux-input@vger.kernel.org
+W: https://github.com/o2genum/ideapad-slidebar
+S: Maintained
+F: drivers/input/misc/ideapad_slidebar.c
+
IDE/ATAPI DRIVERS
M: Borislav Petkov <bp@alien8.de>
L: linux-ide@vger.kernel.org
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 0b541cd..45729a9 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -647,4 +647,13 @@ config INPUT_SIRFSOC_ONKEY

If unsure, say N.

+config INPUT_IDEAPAD_SLIDEBAR
+ tristate "IdeaPad Laptop Slidebar"
+ depends on INPUT
+ help
+ Input driver for slidebars on some Lenovo IdeaPad laptops.
+
+ If you have an IdeaPad laptop with a slidebar, say Y or M here.
+ Module name is ideapad_slidebar.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 829de43..0ebfb6d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
diff --git a/drivers/input/misc/ideapad_slidebar.c b/drivers/input/misc/ideapad_slidebar.c
new file mode 100644
index 0000000..78294fd
--- /dev/null
+++ b/drivers/input/misc/ideapad_slidebar.c
@@ -0,0 +1,378 @@
+/*
+ * Input driver for slidebars on some Lenovo IdeaPad laptops
+ *
+ * Copyright (C) 2013 Andrey Moiseev <o2g.org.ru@gmail.com>
+ *
+ * Reverse-engineered from Lenovo SlideNav software (SBarHook.dll).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+/* Currently tested and works on:
+ * Lenovo IdeaPad Y550
+ * Lenovo IdeaPad Y550P
+ *
+ * Other models can be added easily. To test,
+ * load with 'force' parameter set 'true'.
+ *
+ * LEDs blinking and input mode are managed via sysfs,
+ * (hex, unsigned byte value):
+ * /sys/devices/platform/ideapad_slidebar/slidebar_mode
+ *
+ * The value is in byte range, however, I only figured out
+ * how bits 0b10011001 work. Some other bits, probably,
+ * are meaningfull too.
+ *
+ * Possible states:
+ *
+ * STD_INT, ONMOV_INT, OFF_INT, LAST_POLL, OFF_POLL
+ *
+ * Meaning:
+ * released touched
+ * STD 'heartbeat' lights follow the finger
+ * ONMOV no lights lights follow the finger
+ * LAST at last pos lights follow the finger
+ * OFF no lights no lights
+ *
+ * INT all input events are generated, interrupts are used
+ * POLL no input events by default, to get them,
+ * send 0b10000000 (read below)
+ *
+ * Commands: write
+ *
+ * All | 0b01001 -> STD_INT
+ * possible | 0b10001 -> ONMOV_INT
+ * states | 0b01000 -> OFF_INT
+ *
+ * | 0b0 -> LAST_POLL
+ * STD_INT or ONMOV_INT |
+ * | 0b1 -> STD_INT
+ *
+ * | 0b0 -> OFF_POLL
+ * OFF_INT or OFF_POLL |
+ * | 0b1 -> OFF_INT
+ *
+ * Any state | 0b10000000 -> if the slidebar has updated data,
+ * produce one input event (last position),
+ * switch to respective POLL mode
+ * (like 0x0), if not in POLL mode yet.
+ *
+ * Get current state: read
+ *
+ * masked by 0x11 read value means:
+ *
+ * 0x00 LAST
+ * 0x01 STD
+ * 0x10 OFF
+ * 0x11 ONMOV
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/dmi.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/io.h>
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
+
+#define KBD_IRQ 1
+
+spinlock_t sio_lock = __SPIN_LOCK_UNLOCKED(sio_lock);
+
+static int prev_scancode;
+static int touched;
+static struct input_dev *slidebar_input_dev;
+static struct platform_device *slidebar_platform_dev;
+
+/* Hardware interacting */
+static int slidebar_pos_get(void)
+{
+ int res;
+ unsigned long flags;
+ spin_lock_irqsave(&sio_lock, flags);
+ outb(0xf4, 0xff29);
+ outb(0xbf, 0xff2a);
+ res = inb(0xff2b);
+ spin_unlock_irqrestore(&sio_lock, flags);
+ return res;
+}
+
+static unsigned char slidebar_mode_get(void)
+{
+ int res;
+ unsigned long flags;
+ spin_lock_irqsave(&sio_lock, flags);
+ outb(0xf7, 0xff29);
+ outb(0x8b, 0xff2a);
+ res = inb(0xff2b);
+ spin_unlock_irqrestore(&sio_lock, flags);
+ return res;
+}
+
+static void slidebar_mode_set(unsigned char mode)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&sio_lock, flags);
+ outb(0xf7, 0xff29);
+ outb(0x8b, 0xff2a);
+ outb(mode, 0xff2b);
+ spin_unlock_irqrestore(&sio_lock, flags);
+}
+
+/* Keyboard handler */
+static irq_handler_t kbd_irq_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ /* Scancodes: e03b on move, bb on release */
+ int scancode = inb(0x60);
+ if (scancode == 0xbb) {
+ touched = 0;
+ input_report_key(slidebar_input_dev, BTN_TOUCH, 0);
+ input_sync(slidebar_input_dev);
+ } else if (prev_scancode == 0xe0 && scancode == 0x3b) {
+ if (!touched)
+ input_report_key(slidebar_input_dev, BTN_TOUCH, 1);
+ touched = 1;
+ input_report_abs(slidebar_input_dev, ABS_X, slidebar_pos_get());
+ input_sync(slidebar_input_dev);
+ }
+ prev_scancode = scancode;
+ return (irq_handler_t) IRQ_HANDLED;
+}
+
+/* Input device */
+static int setup_input_dev(void)
+{
+ int err;
+ err = request_irq(KBD_IRQ, (irq_handler_t) kbd_irq_handler, IRQF_SHARED,
+ "ideapad_slidebar", (void *)(kbd_irq_handler));
+ if (err) {
+ pr_err("ideapad_slidebar: Can't allocate irq %d\n", KBD_IRQ);
+ return -EBUSY;
+ }
+
+ slidebar_input_dev = input_allocate_device();
+ if (!slidebar_input_dev) {
+ pr_err("ideapad_slidebar: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_free_irq;
+ }
+
+ slidebar_input_dev->name = "IdeaPad Slidebar";
+ slidebar_input_dev->id.bustype = BUS_HOST;
+ slidebar_input_dev->dev.parent = &slidebar_platform_dev->dev;
+ input_set_capability(slidebar_input_dev, EV_KEY, BTN_TOUCH);
+ input_set_capability(slidebar_input_dev, EV_ABS, ABS_X);
+ input_alloc_absinfo(slidebar_input_dev);
+ input_set_abs_params(slidebar_input_dev, ABS_X, 0, 0xff, 0, 0);
+
+ err = input_register_device(slidebar_input_dev);
+ if (err) {
+ pr_err("ideapad_slidebar: Failed to register device\n");
+ goto err_free_dev;
+ }
+ return 0;
+
+err_free_dev:
+ input_free_device(slidebar_input_dev);
+err_free_irq:
+ free_irq(KBD_IRQ, (void *)(kbd_irq_handler));
+ return err;
+}
+
+static void remove_input_dev(void)
+{
+ free_irq(KBD_IRQ, (void *)(kbd_irq_handler));
+ input_unregister_device(slidebar_input_dev);
+ input_free_device(slidebar_input_dev);
+}
+
+/* Sysfs slidebar_mode interface */
+static ssize_t show_slidebar_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%x\n", slidebar_mode_get());
+}
+
+static ssize_t store_slidebar_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int mode;
+ if (!count)
+ return 0;
+
+ if (sscanf(buf, "%x", &mode) != 1)
+ return -EINVAL;
+
+ slidebar_mode_set(mode);
+ return count;
+}
+
+static DEVICE_ATTR(slidebar_mode, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH,
+ show_slidebar_mode, store_slidebar_mode);
+
+static struct attribute *ideapad_attributes[] = {
+ &dev_attr_slidebar_mode.attr,
+ NULL
+};
+
+static struct attribute_group ideapad_attribute_group = {
+ .attrs = ideapad_attributes
+};
+
+static int setup_slidebar_mode_dev(void)
+{
+ return sysfs_create_group(&slidebar_platform_dev->dev.kobj,
+ &ideapad_attribute_group);
+}
+
+static void remove_slidebar_mode_dev(void)
+{
+ return sysfs_remove_group(&slidebar_platform_dev->dev.kobj,
+ &ideapad_attribute_group);
+}
+
+/* Platform device */
+static int setup_platform_dev(void)
+{
+ int err;
+ slidebar_platform_dev = platform_device_alloc("ideapad_slidebar", -1);
+ if (!slidebar_platform_dev) {
+ pr_err("ideapad_slidebar: Not enough memory\n");
+ return -ENOMEM;
+ }
+
+ err = platform_device_add(slidebar_platform_dev);
+ if (err) {
+ pr_err("ideapad_slidebar: Failed to register plarform device\n");
+ goto err_free_platform_device;
+ }
+ return 0;
+
+err_free_platform_device:
+ platform_device_put(slidebar_platform_dev);
+ return err;
+}
+
+static void remove_platform_dev(void)
+{
+ platform_device_del(slidebar_platform_dev);
+ platform_device_put(slidebar_platform_dev);
+}
+
+/* Platform driver */
+static struct platform_driver slidebar_drv = {
+ .driver = {
+ .name = "ideapad_slidebar",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int register_platform_drv(void)
+{
+ int err;
+ err = platform_driver_register(&slidebar_drv);
+ if (err)
+ pr_err("ideapad_slidebar: Failed to register platform driver\n");
+
+ return err;
+}
+
+static void unregister_platform_drv(void)
+{
+ platform_driver_unregister(&slidebar_drv);
+}
+
+/* DMI */
+static int ideapad_dmi_check(const struct dmi_system_id *id)
+{
+ pr_info("ideapad_slidebar: Laptop model '%s'\n", id->ident);
+ return 1;
+}
+
+static struct dmi_system_id __initdata ideapad_dmi_table[] = {
+ {
+ .ident = "Lenovo IdeaPad Y550",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20017"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550")
+ },
+ .callback = ideapad_dmi_check
+ },
+ {
+ .ident = "Lenovo IdeaPad Y550P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20035"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550P")
+ },
+ .callback = ideapad_dmi_check
+ }
+};
+
+/* Init and cleanup */
+static int __init slidebar_init(void)
+{
+ int err;
+
+ if (!force && !dmi_check_system(ideapad_dmi_table))
+ return -ENODEV;
+
+ err = setup_platform_dev();
+ if (err)
+ return err;
+
+ err = register_platform_drv();
+ if (err)
+ goto err_remove_platform_dev;
+
+ err = setup_input_dev();
+ if (err)
+ goto err_unregister_platform_drv;
+
+ err = setup_slidebar_mode_dev();
+ if (err)
+ goto err_remove_input_dev;
+ return 0;
+
+err_remove_input_dev:
+ remove_input_dev();
+err_unregister_platform_drv:
+ unregister_platform_drv();
+err_remove_platform_dev:
+ remove_platform_dev();
+ return err;
+}
+
+static void __exit slidebar_exit(void)
+{
+ remove_slidebar_mode_dev();
+ remove_input_dev();
+ remove_platform_dev();
+ unregister_platform_drv();
+}
+
+module_init(slidebar_init);
+module_exit(slidebar_exit);
+
+MODULE_AUTHOR("Andrey Moiseev <o2g.org.ru@gmail.com>");
+MODULE_DESCRIPTION("Slidebar input support for some Lenovo IdeaPad laptops");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+MODULE_ALIAS("dmi:*:svnLENOVO:pn20017:pvrLenovoIdeaPadY550:*");
+MODULE_ALIAS("dmi:*:svnLENOVO:pn20035:pvrLenovoIdeaPadY550P:*");
--
1.8.3.4


\
 
 \ /
  Last update: 2013-08-07 14:01    [W:0.458 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site