lkml.org 
[lkml]   [2013]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] input: ti_tsc: Enable shared IRQ for TSC
On 08/05/2013 10:02 AM, Zubair Lutfullah : wrote:
> On Mon, Aug 05, 2013 at 09:12:56AM -0700, Dmitry Torokhov wrote:
>>>> Touchscreen and ADC share the same IRQ line from parent MFD core.
>>>> Previously only Touchscreen was interrupt based.
>>>> With continuous mode support added in ADC driver, driver requires
>>>> interrupt to process the ADC samples, so enable shared IRQ flag bit for
>>>> touchscreen.
>>>>
>>>> @@ -260,8 +260,18 @@ static irqreturn_t titsc_irq(int irq, void *dev)
>>>> unsigned int fsm;
>>>>
>>>> + /*
>>>> + * ADC and touchscreen share the IRQ line.
>>>> + * FIFO1 threshold, FIFO1 Overrun and FIFO1 underflow
>>>> + * interrupts are used by ADC,
>>>> + * hence return from touchscreen IRQ handler if FIFO1
>>>> + * related interrupts occurred.
>>>> + */
>>>> + if ((status & IRQENB_FIFO1THRES) ||
>>>> + (status & IRQENB_FIFO1OVRRUN) ||
>>>> + (status & IRQENB_FIFO1UNDRFLW))
>>>> + return IRQ_NONE;
>>>> + else if (status & IRQENB_FIFO0THRES) {
>>
>> What happens if both parts have data at the same time? Can both
>> IRQENB_FIFO1THRES and IRQENB_FIFO0THRES be signalled? What will happen
>> in this case?
>
> If ADC is sampling and someone is touching the TSC, both interrupts
> can signal so closely that for the purpose of the kernel,
> they can be seen as signaled together.
>
> FIFO 1 used only by ADC and FIFO1THRES handler is inside the iio/adc driver
> FIFO 0 used only by TSC and FIFO0THRES handler is inside the input/touchscreen
>
> Note: These are level interrupts.
>
> I would like some input on how to handle such a situation.
>
> Thanks
> Zubair Lutfullah
>

As far as I know, if there are any bits you can handle and ack, do so
and return IRQ_HANDLED. Otherwise, return IRQ_NONE. If there are still
pending bits, the interrupt will fire again, your handler will be called
again, return IRQ_NONE, and the next handler will be called.


\
 
 \ /
  Last update: 2013-08-06 01:01    [W:1.532 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site