lkml.org 
[lkml]   [2013]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/3] pinctrl: palmas: add pincontrol driver
Date
TI Palmas series Power Management IC have multiple pins which can be
configured for different functionality. This pins can be configured
for different function. Also their properties like pull up/down,
open drain enable/disable are configurable.

Add support for pincontrol driver Palmas series device like TPS65913,
TPS80036. The driver supports to be register from DT only.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- Use pinconf generic properties to define the Palmas pincontrol nodes.
- Nit and cleanups, typo fixes, rephrasing the sentences etc.
- Use pin specific APIs for setting pin configuration rather than group
specific.

.../devicetree/bindings/pinctrl/pinctrl-palmas.txt | 107 ++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-palmas.c | 1085 ++++++++++++++++++++
include/linux/mfd/palmas.h | 35 +-
5 files changed, 1227 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
create mode 100644 drivers/pinctrl/pinctrl-palmas.c

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
new file mode 100644
index 0000000..f5c64ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
@@ -0,0 +1,107 @@
+Palmas Pincontrol bindings
+
+The pins of Palmas device can be set on different option and provides
+the configuration for Pull UP/DOWN, open drain etc.
+
+Required properties:
+- compatible: It must be one of following:
+ - "ti,palmas-pinctrl" for Palma series of the pincontrol.
+ - "ti,tps65913-pinctrl" for Palma series device TPS65913.
+ - "ti,tps80036-pinctrl" for Palma series device TPS80036.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Palmas's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+list of pins. This configuration can include the mux function to select on
+those pin(s), and various pin configuration parameters, such as pull-up,
+open drain.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Optional properties:
+- ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode.
+ Selection primary or secondary function associated to I2C2_SCL_SCE,
+ I2C2_SDA_SDO pin/pad for DVFS1 interface
+- ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
+ Selection primary or secondary function associated to GPADC_START
+ and SYSEN2 pin/pad for DVFS2 interface
+
+Required subnode-properties:
+- pinctrl-pins: An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+
+Optional subnode-properties:
+- pinctrl-function: string containing the name of the function to mux to the
+ pin. Valid values for function names are listed below. Please refer the
+ datasheet of the device to determine which are valid for each pin.
+
+The properties "pinctrl-pins" and "pinctrl-function" ara generic pincontrol
+properties and described in pinctrl-bindings.txt.
+
+Following are other valid propeties for Palams pinctrol dt node which are
+described in pinctrl-bindings.txt.
+bias-disable, bias-pull-up, bias-pull-down, bias-pull-pin-default
+drive-open-drain: Value will represent the open drain to be enable/disable
+ of pins.
+ 0: Disable, 1: Enable.
+
+Note that many of these properties are only valid for certain specific pins.
+See the Palmas device datasheet for complete details regarding which pins
+support which functionality.
+
+Valid values for pin names are:
+pins: gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+ gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, vac, powergood,
+ nreswarm, pwrdown, gpadc_start, reset_in, nsleep, enable1, enable2,
+ int.
+
+function: gpio, led, pwm, regen, sysen, clk32kgaudio, id, vbus_det, chrg_det,
+ vac, vacok, powergood, usb_psel, msecure, pwrhold, int, nreswarm,
+ simrsto, simrsti, low_vbat, wireless_chrg1, rcm, pwrdown, gpadc_start,
+ reset_in, nsleep, enable.
+
+There is 4 special function: opt0, opt1, opt2 and opt3. If this functions are
+selected then directly pins register will be written with 0, 1, 2 and 3
+repectively if it is valid for that pins.
+
+Example:
+ palmas: tps65913 {
+ ....
+ pinctrl {
+ compatible = "ti,tps65913-pinctrl";
+ ti,palmas-enable-dvfs1;
+ pinctrl-names = "default";
+ pinctrl-0 = <&palmas_pins_state>;
+
+ palmas_pins_state: pinmux {
+ gpio0 {
+ pinctrl-pins = "gpio0";
+ pinctrl-function = "id";
+ bias-pull-up;
+ };
+
+ vac {
+ pinctrl-pins = "vac";
+ pinctrl-function = "vacok";
+ bias-pull-down;
+ };
+
+ gpio5 {
+ pinctrl-pins = "gpio5";
+ pinctrl-function = "opt0";
+ drive-open-drain = <1>;
+ };
+ };
+ };
+ ....
+ };
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index bc830af..8542cd4 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -261,6 +261,16 @@ config PINCTRL_EXYNOS5440
select PINMUX
select PINCONF

+config PINCTRL_PALMAS
+ bool "Pinctrl driver for the PALMA Series MFD devices"
+ depends on OF && MFD_PALMAS
+ select GENERIC_PINCONF
+ help
+ Palmas device supports the configuration of pins for different
+ functionality. This driver supports the pinmux, push-pull and
+ open drain configuration for the Palmas series devices like
+ TPS65913, TPS80036 etc.
+
config PINCTRL_S3C24XX
bool "Samsung S3C24XX SoC pinctrl driver"
depends on ARCH_S3C24XX
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index bc03a6e..496d9bf 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
+obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += sirf/
diff --git a/drivers/pinctrl/pinctrl-palmas.c b/drivers/pinctrl/pinctrl-palmas.c
new file mode 100644
index 0000000..2697c2e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-palmas.c
@@ -0,0 +1,1085 @@
+/*
+ * pinctrl-palmas.c -- TI PALMAS series pin control driver.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mfd/palmas.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+#define PALMAS_PIN_GPIO0_ID 0
+#define PALMAS_PIN_GPIO1_VBUS_LED1_PWM1 1
+#define PALMAS_PIN_GPIO2_REGEN_LED2_PWM2 2
+#define PALMAS_PIN_GPIO3_CHRG_DET 3
+#define PALMAS_PIN_GPIO4_SYSEN1 4
+#define PALMAS_PIN_GPIO5_CLK32KGAUDIO_USB_PSEL 5
+#define PALMAS_PIN_GPIO6_SYSEN2 6
+#define PALMAS_PIN_GPIO7_MSECURE_PWRHOLD 7
+#define PALMAS_PIN_GPIO8_SIM1RSTI 8
+#define PALMAS_PIN_GPIO9_LOW_VBAT 9
+#define PALMAS_PIN_GPIO10_WIRELESS_CHRG1 10
+#define PALMAS_PIN_GPIO11_RCM 11
+#define PALMAS_PIN_GPIO12_SIM2RSTO 12
+#define PALMAS_PIN_GPIO13 13
+#define PALMAS_PIN_GPIO14 14
+#define PALMAS_PIN_GPIO15_SIM2RSTI 15
+#define PALMAS_PIN_VAC 16
+#define PALMAS_PIN_POWERGOOD_USB_PSEL 17
+#define PALMAS_PIN_NRESWARM 18
+#define PALMAS_PIN_PWRDOWN 19
+#define PALMAS_PIN_GPADC_START 20
+#define PALMAS_PIN_RESET_IN 21
+#define PALMAS_PIN_NSLEEP 22
+#define PALMAS_PIN_ENABLE1 23
+#define PALMAS_PIN_ENABLE2 24
+#define PALMAS_PIN_INT 25
+#define PALMAS_PIN_NUM (PALMAS_PIN_INT + 1)
+
+struct palmas_pin_function {
+ const char *name;
+ const char * const *groups;
+ unsigned ngroups;
+};
+
+struct palmas_pctrl_chip_info {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ struct palmas *palmas;
+ int pins_current_opt[PALMAS_PIN_NUM];
+ const struct palmas_pin_function *functions;
+ unsigned num_functions;
+ const struct palmas_pingroup *pin_groups;
+ int num_pin_groups;
+ const struct pinctrl_pin_desc *pins;
+ unsigned num_pins;
+};
+
+static const struct pinctrl_pin_desc palmas_pins_desc[] = {
+ PINCTRL_PIN(PALMAS_PIN_GPIO0_ID, "gpio0"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO1_VBUS_LED1_PWM1, "gpio1"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO2_REGEN_LED2_PWM2, "gpio2"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO3_CHRG_DET, "gpio3"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO4_SYSEN1, "gpio4"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO5_CLK32KGAUDIO_USB_PSEL, "gpio5"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO6_SYSEN2, "gpio6"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO7_MSECURE_PWRHOLD, "gpio7"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO8_SIM1RSTI, "gpio8"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO9_LOW_VBAT, "gpio9"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO10_WIRELESS_CHRG1, "gpio10"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO11_RCM, "gpio11"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO12_SIM2RSTO, "gpio12"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO13, "gpio13"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO14, "gpio14"),
+ PINCTRL_PIN(PALMAS_PIN_GPIO15_SIM2RSTI, "gpio15"),
+ PINCTRL_PIN(PALMAS_PIN_VAC, "vac"),
+ PINCTRL_PIN(PALMAS_PIN_POWERGOOD_USB_PSEL, "powergood"),
+ PINCTRL_PIN(PALMAS_PIN_NRESWARM, "nreswarm"),
+ PINCTRL_PIN(PALMAS_PIN_PWRDOWN, "pwrdown"),
+ PINCTRL_PIN(PALMAS_PIN_GPADC_START, "gpadc_start"),
+ PINCTRL_PIN(PALMAS_PIN_RESET_IN, "reset_in"),
+ PINCTRL_PIN(PALMAS_PIN_NSLEEP, "nsleep"),
+ PINCTRL_PIN(PALMAS_PIN_ENABLE1, "enable1"),
+ PINCTRL_PIN(PALMAS_PIN_ENABLE2, "enable2"),
+ PINCTRL_PIN(PALMAS_PIN_INT, "int"),
+};
+
+static const char * const opt0_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "vac",
+ "powergood",
+ "nreswarm",
+ "pwrdown",
+ "gpadc_start",
+ "reset_in",
+ "nsleep",
+ "enable1",
+ "enable2",
+ "int",
+};
+
+static const char * const opt1_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio15",
+ "vac",
+ "powergood",
+};
+
+static const char * const opt2_groups[] = {
+ "gpio1",
+ "gpio2",
+ "gpio5",
+ "gpio7",
+};
+
+static const char * const opt3_groups[] = {
+ "gpio1",
+ "gpio2",
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+};
+
+static const char * const led_groups[] = {
+ "gpio1",
+ "gpio2",
+};
+
+static const char * const pwm_groups[] = {
+ "gpio1",
+ "gpio2",
+};
+
+static const char * const regen_groups[] = {
+ "gpio2",
+};
+
+static const char * const sysen_groups[] = {
+ "gpio4",
+ "gpio6",
+};
+
+static const char * const clk32kgaudio_groups[] = {
+ "gpio5",
+};
+
+static const char * const id_groups[] = {
+ "gpio0",
+};
+
+static const char * const vbus_det_groups[] = {
+ "gpio1",
+};
+
+static const char * const chrg_det_groups[] = {
+ "gpio3",
+};
+
+static const char * const vac_groups[] = {
+ "vac",
+};
+
+static const char * const vacok_groups[] = {
+ "vac",
+};
+
+static const char * const powergood_groups[] = {
+ "powergood",
+};
+
+static const char * const usb_psel_groups[] = {
+ "gpio5",
+ "powergood",
+};
+
+static const char * const msecure_groups[] = {
+ "gpio7",
+};
+
+static const char * const pwrhold_groups[] = {
+ "gpio7",
+};
+
+static const char * const int_groups[] = {
+ "int",
+};
+
+static const char * const nreswarm_groups[] = {
+ "nreswarm",
+};
+
+static const char * const simrsto_groups[] = {
+ "gpio12",
+};
+
+static const char * const simrsti_groups[] = {
+ "gpio8",
+ "gpio15",
+};
+
+static const char * const low_vbat_groups[] = {
+ "gpio9",
+};
+
+static const char * const wireless_chrg1_groups[] = {
+ "gpio10",
+};
+
+static const char * const rcm_groups[] = {
+ "gpio11",
+};
+
+static const char * const pwrdown_groups[] = {
+ "pwrdown",
+};
+
+static const char * const gpadc_start_groups[] = {
+ "gpadc_start",
+};
+
+static const char * const reset_in_groups[] = {
+ "reset_in",
+};
+
+static const char * const nsleep_groups[] = {
+ "nsleep",
+};
+
+static const char * const enable_groups[] = {
+ "enable1",
+ "enable2",
+};
+
+#define FUNCTION_GROUPS \
+ FUNCTION_GROUP(opt0, OPTION0), \
+ FUNCTION_GROUP(opt1, OPTION1), \
+ FUNCTION_GROUP(opt2, OPTION2), \
+ FUNCTION_GROUP(opt3, OPTION3), \
+ FUNCTION_GROUP(gpio, GPIO), \
+ FUNCTION_GROUP(led, LED), \
+ FUNCTION_GROUP(pwm, PWM), \
+ FUNCTION_GROUP(regen, REGEN), \
+ FUNCTION_GROUP(sysen, SYSEN), \
+ FUNCTION_GROUP(clk32kgaudio, CLK32KGAUDIO), \
+ FUNCTION_GROUP(id, ID), \
+ FUNCTION_GROUP(vbus_det, VBUS_DET), \
+ FUNCTION_GROUP(chrg_det, CHRG_DET), \
+ FUNCTION_GROUP(vac, VAC), \
+ FUNCTION_GROUP(vacok, VACOK), \
+ FUNCTION_GROUP(powergood, POWERGOOD), \
+ FUNCTION_GROUP(usb_psel, USB_PSEL), \
+ FUNCTION_GROUP(msecure, MSECURE), \
+ FUNCTION_GROUP(pwrhold, PWRHOLD), \
+ FUNCTION_GROUP(int, INT), \
+ FUNCTION_GROUP(nreswarm, NRESWARM), \
+ FUNCTION_GROUP(simrsto, SIMRSTO), \
+ FUNCTION_GROUP(simrsti, SIMRSTI), \
+ FUNCTION_GROUP(low_vbat, LOW_VBAT), \
+ FUNCTION_GROUP(wireless_chrg1, WIRELESS_CHRG1), \
+ FUNCTION_GROUP(rcm, RCM), \
+ FUNCTION_GROUP(pwrdown, PWRDOWN), \
+ FUNCTION_GROUP(gpadc_start, GPADC_START), \
+ FUNCTION_GROUP(reset_in, RESET_IN), \
+ FUNCTION_GROUP(nsleep, NSLEEP), \
+ FUNCTION_GROUP(enable, ENABLE)
+
+static const struct palmas_pin_function palmas_pin_function[] = {
+#undef FUNCTION_GROUP
+#define FUNCTION_GROUP(fname, mux) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+ FUNCTION_GROUPS,
+};
+
+enum palmas_pinmux {
+#undef FUNCTION_GROUP
+#define FUNCTION_GROUP(fname, mux) PALMAS_PINMUX_##mux
+ FUNCTION_GROUPS,
+ PALMAS_PINMUX_NA = 0xFFFF,
+};
+
+struct palmas_pins_pullup_dn_info {
+ int pullup_dn_reg_base;
+ int pullup_dn_reg_add;
+ int pullup_dn_mask;
+ int normal_val;
+ int pull_up_val;
+ int pull_dn_val;
+};
+
+struct palmas_pins_od_info {
+ int od_reg_base;
+ int od_reg_add;
+ int od_mask;
+ int od_enable;
+ int od_disable;
+};
+
+struct palmas_pin_info {
+ enum palmas_pinmux mux_opt;
+ const struct palmas_pins_pullup_dn_info *pud_info;
+ const struct palmas_pins_od_info *od_info;
+};
+
+struct palmas_pingroup {
+ const char *name;
+ const unsigned pins[1];
+ unsigned npins;
+ unsigned mux_reg_base;
+ unsigned mux_reg_add;
+ unsigned mux_reg_mask;
+ unsigned mux_bit_shift;
+ const struct palmas_pin_info *opt[4];
+};
+
+#define PULL_UP_DN(_name, _rbase, _add, _mask, _nv, _uv, _dv) \
+static const struct palmas_pins_pullup_dn_info pud_##_name##_info = { \
+ .pullup_dn_reg_base = PALMAS_##_rbase##_BASE, \
+ .pullup_dn_reg_add = _add, \
+ .pullup_dn_mask = _mask, \
+ .normal_val = _nv, \
+ .pull_up_val = _uv, \
+ .pull_dn_val = _dv, \
+}
+
+PULL_UP_DN(nreswarm, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL1, 0x2, 0x0, 0x2, -1);
+PULL_UP_DN(pwrdown, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL1, 0x4, 0x0, -1, 0x4);
+PULL_UP_DN(gpadc_start, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL1, 0x30, 0x0, 0x20, 0x10);
+PULL_UP_DN(reset_in, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL1, 0x40, 0x0, -1, 0x40);
+PULL_UP_DN(nsleep, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL2, 0x3, 0x0, 0x2, 0x1);
+PULL_UP_DN(enable1, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL2, 0xC, 0x0, 0x8, 0x4);
+PULL_UP_DN(enable2, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL2, 0x30, 0x0, 0x20, 0x10);
+PULL_UP_DN(vacok, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL3, 0x40, 0x0, -1, 0x40);
+PULL_UP_DN(chrg_det, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL3, 0x10, 0x0, -1, 0x10);
+PULL_UP_DN(pwrhold, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL3, 0x4, 0x0, -1, 0x4);
+PULL_UP_DN(msecure, PU_PD_OD, PALMAS_PU_PD_INPUT_CTRL3, 0x1, 0x0, -1, 0x1);
+PULL_UP_DN(id, USB_OTG, PALMAS_USB_ID_CTRL_SET, 0x40, 0x0, 0x40, -1);
+PULL_UP_DN(gpio0, GPIO, PALMAS_PU_PD_GPIO_CTRL1, 0x04, 0, -1, 1);
+PULL_UP_DN(gpio1, GPIO, PALMAS_PU_PD_GPIO_CTRL1, 0x0C, 0, 0x8, 0x4);
+PULL_UP_DN(gpio2, GPIO, PALMAS_PU_PD_GPIO_CTRL1, 0x30, 0x0, 0x20, 0x10);
+PULL_UP_DN(gpio3, GPIO, PALMAS_PU_PD_GPIO_CTRL1, 0x40, 0x0, -1, 0x40);
+PULL_UP_DN(gpio4, GPIO, PALMAS_PU_PD_GPIO_CTRL2, 0x03, 0x0, 0x2, 0x1);
+PULL_UP_DN(gpio5, GPIO, PALMAS_PU_PD_GPIO_CTRL2, 0x0c, 0x0, 0x8, 0x4);
+PULL_UP_DN(gpio6, GPIO, PALMAS_PU_PD_GPIO_CTRL2, 0x30, 0x0, 0x20, 0x10);
+PULL_UP_DN(gpio7, GPIO, PALMAS_PU_PD_GPIO_CTRL2, 0x40, 0x0, -1, 0x40);
+PULL_UP_DN(gpio9, GPIO, PALMAS_PU_PD_GPIO_CTRL3, 0x0C, 0x0, 0x8, 0x4);
+PULL_UP_DN(gpio10, GPIO, PALMAS_PU_PD_GPIO_CTRL3, 0x30, 0x0, 0x20, 0x10);
+PULL_UP_DN(gpio11, GPIO, PALMAS_PU_PD_GPIO_CTRL3, 0xC0, 0x0, 0x80, 0x40);
+PULL_UP_DN(gpio13, GPIO, PALMAS_PU_PD_GPIO_CTRL4, 0x04, 0x0, -1, 0x04);
+PULL_UP_DN(gpio14, GPIO, PALMAS_PU_PD_GPIO_CTRL4, 0x30, 0x0, 0x20, 0x10);
+
+#define OD_INFO(_name, _rbase, _add, _mask, _ev, _dv) \
+static const struct palmas_pins_od_info od_##_name##_info = { \
+ .od_reg_base = PALMAS_##_rbase##_BASE, \
+ .od_reg_add = _add, \
+ .od_mask = _mask, \
+ .od_enable = _ev, \
+ .od_disable = _dv, \
+}
+
+OD_INFO(gpio1, GPIO, PALMAS_OD_OUTPUT_GPIO_CTRL, 0x1, 0x1, 0x0);
+OD_INFO(gpio2, GPIO, PALMAS_OD_OUTPUT_GPIO_CTRL, 0x2, 0x2, 0x0);
+OD_INFO(gpio5, GPIO, PALMAS_OD_OUTPUT_GPIO_CTRL, 0x20, 0x20, 0x0);
+OD_INFO(gpio10, GPIO, PALMAS_OD_OUTPUT_GPIO_CTRL2, 0x04, 0x04, 0x0);
+OD_INFO(gpio13, GPIO, PALMAS_OD_OUTPUT_GPIO_CTRL2, 0x20, 0x20, 0x0);
+OD_INFO(int, PU_PD_OD, PALMAS_OD_OUTPUT_CTRL, 0x8, 0x8, 0x0);
+OD_INFO(pwm1, PU_PD_OD, PALMAS_OD_OUTPUT_CTRL, 0x20, 0x20, 0x0);
+OD_INFO(pwm2, PU_PD_OD, PALMAS_OD_OUTPUT_CTRL, 0x80, 0x80, 0x0);
+OD_INFO(vbus_det, PU_PD_OD, PALMAS_OD_OUTPUT_CTRL, 0x40, 0x40, 0x0);
+
+#define PIN_INFO(_name, _id, _pud_info, _od_info) \
+static const struct palmas_pin_info pin_##_name##_info = { \
+ .mux_opt = PALMAS_PINMUX_##_id, \
+ .pud_info = _pud_info, \
+ .od_info = _od_info \
+}
+
+PIN_INFO(gpio0, GPIO, &pud_gpio0_info, NULL);
+PIN_INFO(gpio1, GPIO, &pud_gpio1_info, &od_gpio1_info);
+PIN_INFO(gpio2, GPIO, &pud_gpio2_info, &od_gpio2_info);
+PIN_INFO(gpio3, GPIO, &pud_gpio3_info, NULL);
+PIN_INFO(gpio4, GPIO, &pud_gpio4_info, NULL);
+PIN_INFO(gpio5, GPIO, &pud_gpio5_info, &od_gpio5_info);
+PIN_INFO(gpio6, GPIO, &pud_gpio6_info, NULL);
+PIN_INFO(gpio7, GPIO, &pud_gpio7_info, NULL);
+PIN_INFO(gpio8, GPIO, NULL, NULL);
+PIN_INFO(gpio9, GPIO, &pud_gpio9_info, NULL);
+PIN_INFO(gpio10, GPIO, &pud_gpio10_info, &od_gpio10_info);
+PIN_INFO(gpio11, GPIO, &pud_gpio11_info, NULL);
+PIN_INFO(gpio12, GPIO, NULL, NULL);
+PIN_INFO(gpio13, GPIO, &pud_gpio13_info, &od_gpio13_info);
+PIN_INFO(gpio14, GPIO, &pud_gpio14_info, NULL);
+PIN_INFO(gpio15, GPIO, NULL, NULL);
+PIN_INFO(id, ID, &pud_id_info, NULL);
+PIN_INFO(led1, LED, NULL, NULL);
+PIN_INFO(led2, LED, NULL, NULL);
+PIN_INFO(regen, REGEN, NULL, NULL);
+PIN_INFO(sysen1, SYSEN, NULL, NULL);
+PIN_INFO(sysen2, SYSEN, NULL, NULL);
+PIN_INFO(int, INT, NULL, &od_int_info);
+PIN_INFO(pwm1, PWM, NULL, &od_pwm1_info);
+PIN_INFO(pwm2, PWM, NULL, &od_pwm2_info);
+PIN_INFO(vacok, VACOK, &pud_vacok_info, NULL);
+PIN_INFO(chrg_det, CHRG_DET, &pud_chrg_det_info, NULL);
+PIN_INFO(pwrhold, PWRHOLD, &pud_pwrhold_info, NULL);
+PIN_INFO(msecure, MSECURE, &pud_msecure_info, NULL);
+PIN_INFO(nreswarm, NA, &pud_nreswarm_info, NULL);
+PIN_INFO(pwrdown, NA, &pud_pwrdown_info, NULL);
+PIN_INFO(gpadc_start, NA, &pud_gpadc_start_info, NULL);
+PIN_INFO(reset_in, NA, &pud_reset_in_info, NULL);
+PIN_INFO(nsleep, NA, &pud_nsleep_info, NULL);
+PIN_INFO(enable1, NA, &pud_enable1_info, NULL);
+PIN_INFO(enable2, NA, &pud_enable2_info, NULL);
+PIN_INFO(clk32kgaudio, CLK32KGAUDIO, NULL, NULL);
+PIN_INFO(usb_psel, USB_PSEL, NULL, NULL);
+PIN_INFO(vac, VAC, NULL, NULL);
+PIN_INFO(powergood, POWERGOOD, NULL, NULL);
+PIN_INFO(vbus_det, VBUS_DET, NULL, &od_vbus_det_info);
+PIN_INFO(sim1rsti, SIMRSTI, NULL, NULL);
+PIN_INFO(low_vbat, LOW_VBAT, NULL, NULL);
+PIN_INFO(rcm, RCM, NULL, NULL);
+PIN_INFO(sim2rsto, SIMRSTO, NULL, NULL);
+PIN_INFO(sim2rsti, SIMRSTI, NULL, NULL);
+PIN_INFO(wireless_chrg1, WIRELESS_CHRG1, NULL, NULL);
+
+#define PALMAS_PRIMARY_SECONDARY_NONE 0
+#define PALMAS_NONE_BASE 0
+#define PALMAS_PRIMARY_SECONDARY_INPUT3 PALMAS_PU_PD_INPUT_CTRL3
+
+#define PALMAS_PINGROUP(pg_name, pin_id, base, reg, _mask, _bshift, o0, o1, o2, o3) \
+ { \
+ .name = #pg_name, \
+ .pins = {PALMAS_PIN_##pin_id}, \
+ .npins = 1, \
+ .mux_reg_base = PALMAS_##base##_BASE, \
+ .mux_reg_add = PALMAS_PRIMARY_SECONDARY_##reg, \
+ .mux_reg_mask = _mask, \
+ .mux_bit_shift = _bshift, \
+ .opt = { \
+ o0, \
+ o1, \
+ o2, \
+ o3, \
+ }, \
+ }
+
+static const struct palmas_pingroup tps65913_pingroups[] = {
+ PALMAS_PINGROUP(gpio0, GPIO0_ID, PU_PD_OD, PAD1, 0x4, 0x2, &pin_gpio0_info, &pin_id_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio1, GPIO1_VBUS_LED1_PWM1, PU_PD_OD, PAD1, 0x18, 0x3, &pin_gpio1_info, &pin_vbus_det_info, &pin_led1_info, &pin_pwm1_info),
+ PALMAS_PINGROUP(gpio2, GPIO2_REGEN_LED2_PWM2, PU_PD_OD, PAD1, 0x60, 0x5, &pin_gpio2_info, &pin_regen_info, &pin_led2_info, &pin_pwm2_info),
+ PALMAS_PINGROUP(gpio3, GPIO3_CHRG_DET, PU_PD_OD, PAD1, 0x80, 0x7, &pin_gpio3_info, &pin_chrg_det_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio4, GPIO4_SYSEN1, PU_PD_OD, PAD1, 0x01, 0x0, &pin_gpio4_info, &pin_sysen1_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio5, GPIO5_CLK32KGAUDIO_USB_PSEL, PU_PD_OD, PAD2, 0x6, 0x1, &pin_gpio5_info, &pin_clk32kgaudio_info, &pin_usb_psel_info, NULL),
+ PALMAS_PINGROUP(gpio6, GPIO6_SYSEN2, PU_PD_OD, PAD2, 0x08, 0x3, &pin_gpio6_info, &pin_sysen2_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio7, GPIO7_MSECURE_PWRHOLD, PU_PD_OD, PAD2, 0x30, 0x4, &pin_gpio7_info, &pin_msecure_info, &pin_pwrhold_info, NULL),
+ PALMAS_PINGROUP(vac, VAC, PU_PD_OD, PAD1, 0x02, 0x1, &pin_vac_info, &pin_vacok_info, NULL, NULL),
+ PALMAS_PINGROUP(powergood, POWERGOOD_USB_PSEL, PU_PD_OD, PAD1, 0x01, 0x0, &pin_powergood_info, &pin_usb_psel_info, NULL, NULL),
+ PALMAS_PINGROUP(nreswarm, NRESWARM, NONE, NONE, 0x0, 0x0, &pin_nreswarm_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(pwrdown, PWRDOWN, NONE, NONE, 0x0, 0x0, &pin_pwrdown_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(gpadc_start, GPADC_START, NONE, NONE, 0x0, 0x0, &pin_gpadc_start_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(reset_in, RESET_IN, NONE, NONE, 0x0, 0x0, &pin_reset_in_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(nsleep, NSLEEP, NONE, NONE, 0x0, 0x0, &pin_nsleep_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(enable1, ENABLE1, NONE, NONE, 0x0, 0x0, &pin_enable1_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(enable2, ENABLE2, NONE, NONE, 0x0, 0x0, &pin_enable2_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(int, INT, NONE, NONE, 0x0, 0x0, &pin_int_info, NULL, NULL, NULL),
+};
+
+static const struct palmas_pingroup tps80036_pingroups[] = {
+ PALMAS_PINGROUP(gpio0, GPIO0_ID, PU_PD_OD, PAD1, 0x4, 0x2, &pin_gpio0_info, &pin_id_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio1, GPIO1_VBUS_LED1_PWM1, PU_PD_OD, PAD1, 0x18, 0x3, &pin_gpio1_info, &pin_vbus_det_info, &pin_led1_info, &pin_pwm1_info),
+ PALMAS_PINGROUP(gpio2, GPIO2_REGEN_LED2_PWM2, PU_PD_OD, PAD1, 0x60, 0x5, &pin_gpio2_info, &pin_regen_info, &pin_led2_info, &pin_pwm2_info),
+ PALMAS_PINGROUP(gpio3, GPIO3_CHRG_DET, PU_PD_OD, PAD1, 0x80, 0x7, &pin_gpio3_info, &pin_chrg_det_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio4, GPIO4_SYSEN1, PU_PD_OD, PAD1, 0x01, 0x0, &pin_gpio4_info, &pin_sysen1_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio5, GPIO5_CLK32KGAUDIO_USB_PSEL, PU_PD_OD, PAD2, 0x6, 0x1, &pin_gpio5_info, &pin_clk32kgaudio_info, &pin_usb_psel_info, NULL),
+ PALMAS_PINGROUP(gpio6, GPIO6_SYSEN2, PU_PD_OD, PAD2, 0x08, 0x3, &pin_gpio6_info, &pin_sysen2_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio7, GPIO7_MSECURE_PWRHOLD, PU_PD_OD, PAD2, 0x30, 0x4, &pin_gpio7_info, &pin_msecure_info, &pin_pwrhold_info, NULL),
+ PALMAS_PINGROUP(gpio8, GPIO8_SIM1RSTI, PU_PD_OD, PAD4, 0x01, 0x0, &pin_gpio8_info, &pin_sim1rsti_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio9, GPIO9_LOW_VBAT, PU_PD_OD, PAD4, 0x02, 0x1, &pin_gpio9_info, &pin_low_vbat_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio10, GPIO10_WIRELESS_CHRG1, PU_PD_OD, PAD4, 0x04, 0x2, &pin_gpio10_info, &pin_wireless_chrg1_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio11, GPIO11_RCM, PU_PD_OD, PAD4, 0x08, 0x3, &pin_gpio11_info, &pin_rcm_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio12, GPIO12_SIM2RSTO, PU_PD_OD, PAD4, 0x10, 0x4, &pin_gpio12_info, &pin_sim2rsto_info, NULL, NULL),
+ PALMAS_PINGROUP(gpio13, GPIO13, NONE, NONE, 0x00, 0x0, &pin_gpio13_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(gpio14, GPIO14, NONE, NONE, 0x00, 0x0, &pin_gpio14_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(gpio15, GPIO15_SIM2RSTI, PU_PD_OD, PAD4, 0x80, 0x7, &pin_gpio15_info, &pin_sim2rsti_info, NULL, NULL),
+ PALMAS_PINGROUP(vac, VAC, PU_PD_OD, PAD1, 0x02, 0x1, &pin_vac_info, &pin_vacok_info, NULL, NULL),
+ PALMAS_PINGROUP(powergood, POWERGOOD_USB_PSEL, PU_PD_OD, PAD1, 0x01, 0x0, &pin_powergood_info, &pin_usb_psel_info, NULL, NULL),
+ PALMAS_PINGROUP(nreswarm, NRESWARM, NONE, NONE, 0x0, 0x0, &pin_nreswarm_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(pwrdown, PWRDOWN, NONE, NONE, 0x0, 0x0, &pin_pwrdown_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(gpadc_start, GPADC_START, NONE, NONE, 0x0, 0x0, &pin_gpadc_start_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(reset_in, RESET_IN, NONE, NONE, 0x0, 0x0, &pin_reset_in_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(nsleep, NSLEEP, NONE, NONE, 0x0, 0x0, &pin_nsleep_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(enable1, ENABLE1, NONE, NONE, 0x0, 0x0, &pin_enable1_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(enable2, ENABLE2, NONE, NONE, 0x0, 0x0, &pin_enable2_info, NULL, NULL, NULL),
+ PALMAS_PINGROUP(int, INT, NONE, NONE, 0x0, 0x0, &pin_int_info, NULL, NULL, NULL),
+};
+
+static int palmas_pinctrl_get_pin_mux(struct palmas_pctrl_chip_info *pci)
+{
+ const struct palmas_pingroup *g;
+ unsigned int val;
+ int ret;
+ int i;
+
+ for (i = 0; i < pci->num_pin_groups; ++i) {
+ g = &pci->pin_groups[i];
+ if (g->mux_reg_base == PALMAS_NONE_BASE) {
+ pci->pins_current_opt[i] = 0;
+ continue;
+ }
+ ret = palmas_read(pci->palmas, g->mux_reg_base,
+ g->mux_reg_add, &val);
+ if (ret < 0) {
+ dev_err(pci->dev, "mux_reg 0x%02x read failed: %d\n",
+ g->mux_reg_add, ret);
+ return ret;
+ }
+ val &= g->mux_reg_mask;
+ pci->pins_current_opt[i] = val >> g->mux_bit_shift;
+ }
+ return 0;
+}
+
+static int palmas_pinctrl_set_dvfs1(struct palmas_pctrl_chip_info *pci,
+ bool enable)
+{
+ int ret;
+ int val;
+
+ val = enable ? PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1 : 0;
+ ret = palmas_update_bits(pci->palmas, PALMAS_PU_PD_OD_BASE,
+ PALMAS_PRIMARY_SECONDARY_PAD3,
+ PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1, val);
+ if (ret < 0)
+ dev_err(pci->dev, "SECONDARY_PAD3 update failed %d\n", ret);
+ return ret;
+}
+
+static int palmas_pinctrl_set_dvfs2(struct palmas_pctrl_chip_info *pci,
+ bool enable)
+{
+ int ret;
+ int val;
+
+ val = enable ? PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2 : 0;
+ ret = palmas_update_bits(pci->palmas, PALMAS_PU_PD_OD_BASE,
+ PALMAS_PRIMARY_SECONDARY_PAD3,
+ PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2, val);
+ if (ret < 0)
+ dev_err(pci->dev, "SECONDARY_PAD3 update failed %d\n", ret);
+ return ret;
+}
+
+static int palmas_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ return pci->num_pin_groups;
+}
+
+static const char *palmas_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ return pci->pin_groups[group].name;
+}
+
+static int palmas_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins, unsigned *num_pins)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pci->pin_groups[group].pins;
+ *num_pins = pci->pin_groups[group].npins;
+ return 0;
+}
+
+static const struct pinctrl_ops palmas_pinctrl_ops = {
+ .get_groups_count = palmas_pinctrl_get_groups_count,
+ .get_group_name = palmas_pinctrl_get_group_name,
+ .get_group_pins = palmas_pinctrl_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int palmas_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ return pci->num_functions;
+}
+
+static const char *palmas_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ return pci->functions[function].name;
+}
+
+static int palmas_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+ unsigned function, const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pci->functions[function].groups;
+ *num_groups = pci->functions[function].ngroups;
+ return 0;
+}
+
+static int palmas_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned group)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+ const struct palmas_pingroup *g;
+ int i;
+ int ret;
+
+ g = &pci->pin_groups[group];
+
+ /* If direct option is provided here */
+ if (function <= PALMAS_PINMUX_OPTION3) {
+ if (!g->opt[function]) {
+ dev_err(pci->dev, "Pin %s does not support option %d\n",
+ g->name, function);
+ return -EINVAL;
+ }
+ i = function;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(g->opt); i++) {
+ if (!g->opt[i])
+ continue;
+ if (g->opt[i]->mux_opt == function)
+ break;
+ }
+ if (WARN_ON(i == ARRAY_SIZE(g->opt))) {
+ dev_err(pci->dev, "Pin %s does not support option %d\n",
+ g->name, function);
+ return -EINVAL;
+ }
+ }
+
+ if (g->mux_reg_base == PALMAS_NONE_BASE) {
+ if (WARN_ON(i != 0))
+ return -EINVAL;
+ return 0;
+ }
+
+ dev_dbg(pci->dev, "%s(): Base0x%02x:0x%02x:0x%02x:0x%02x\n",
+ __func__, g->mux_reg_base, g->mux_reg_add,
+ g->mux_reg_mask, i << g->mux_bit_shift);
+
+ ret = palmas_update_bits(pci->palmas, g->mux_reg_base, g->mux_reg_add,
+ g->mux_reg_mask, i << g->mux_bit_shift);
+ if (ret < 0) {
+ dev_err(pci->dev, "Reg 0x%02x update failed: %d\n",
+ g->mux_reg_add, ret);
+ return ret;
+ }
+ pci->pins_current_opt[group] = i;
+ return 0;
+}
+
+static const struct pinmux_ops palmas_pinmux_ops = {
+ .get_functions_count = palmas_pinctrl_get_funcs_count,
+ .get_function_name = palmas_pinctrl_get_func_name,
+ .get_function_groups = palmas_pinctrl_get_func_groups,
+ .enable = palmas_pinctrl_enable,
+};
+
+static int palmas_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long *config)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ const struct palmas_pingroup *g;
+ const struct palmas_pin_info *opt;
+ unsigned int val;
+ int ret;
+ int base, add;
+ int rval;
+ int arg;
+ int group_nr;
+
+ for (group_nr = 0; group_nr < pci->num_pin_groups; ++group_nr) {
+ if (pci->pin_groups[group_nr].pins[0] == pin)
+ break;
+ }
+
+ if (group_nr == pci->num_pin_groups) {
+ dev_err(pci->dev,
+ "Pinconf is not supported for pin-id %d\n", pin);
+ return -ENOTSUPP;
+ }
+
+ g = &pci->pin_groups[group_nr];
+ opt = g->opt[pci->pins_current_opt[group_nr]];
+ if (!opt) {
+ dev_err(pci->dev,
+ "Pinconf is not supported for pin %s\n", g->name);
+ return -ENOTSUPP;
+ }
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (!opt->pud_info) {
+ dev_err(pci->dev,
+ "PULL control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ base = opt->pud_info->pullup_dn_reg_base;
+ add = opt->pud_info->pullup_dn_reg_add;
+ ret = palmas_read(pci->palmas, base, add, &val);
+ if (ret < 0) {
+ dev_err(pci->dev, "Reg 0x%02x read failed: %d\n",
+ add, ret);
+ return ret;
+ }
+
+ rval = val & opt->pud_info->pullup_dn_mask;
+ arg = 0;
+ if ((opt->pud_info->normal_val >= 0) &&
+ (opt->pud_info->normal_val == rval) &&
+ (param == PIN_CONFIG_BIAS_DISABLE))
+ arg = 1;
+ else if ((opt->pud_info->pull_up_val >= 0) &&
+ (opt->pud_info->pull_up_val == rval) &&
+ (param == PIN_CONFIG_BIAS_PULL_UP))
+ arg = 1;
+ else if ((opt->pud_info->pull_dn_val >= 0) &&
+ (opt->pud_info->pull_dn_val == rval) &&
+ (param == PIN_CONFIG_BIAS_PULL_DOWN))
+ arg = 1;
+ break;
+
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ if (!opt->od_info) {
+ dev_err(pci->dev,
+ "OD control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ base = opt->od_info->od_reg_base;
+ add = opt->od_info->od_reg_add;
+ ret = palmas_read(pci->palmas, base, add, &val);
+ if (ret < 0) {
+ dev_err(pci->dev, "Reg 0x%02x read failed: %d\n",
+ add, ret);
+ return ret;
+ }
+ rval = val & opt->od_info->od_mask;
+ arg = -1;
+ if ((opt->od_info->od_disable >= 0) &&
+ (opt->od_info->od_disable == rval))
+ arg = 0;
+ else if ((opt->od_info->od_enable >= 0) &&
+ (opt->od_info->od_enable == rval))
+ arg = 1;
+ if (arg < 0) {
+ dev_err(pci->dev,
+ "OD control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ break;
+
+ default:
+ dev_err(pci->dev, "Properties not supported\n");
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, (u16)arg);
+ return 0;
+}
+
+static int palmas_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long config)
+{
+ struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(config);
+ u16 param_val = pinconf_to_config_argument(config);
+ const struct palmas_pingroup *g;
+ const struct palmas_pin_info *opt;
+ int ret;
+ int base, add, mask;
+ int rval;
+ int group_nr;
+
+ for (group_nr = 0; group_nr < pci->num_pin_groups; ++group_nr) {
+ if (pci->pin_groups[group_nr].pins[0] == pin)
+ break;
+ }
+
+ if (group_nr == pci->num_pin_groups) {
+ dev_err(pci->dev,
+ "Pinconf is not supported for pin-id %d\n", pin);
+ return -ENOTSUPP;
+ }
+
+ g = &pci->pin_groups[group_nr];
+ opt = g->opt[pci->pins_current_opt[group_nr]];
+ if (!opt) {
+ dev_err(pci->dev,
+ "Pinconf is not supported for pin %s\n", g->name);
+ return -ENOTSUPP;
+ }
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+ return 0;
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (!opt->pud_info) {
+ dev_err(pci->dev,
+ "PULL control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ base = opt->pud_info->pullup_dn_reg_base;
+ add = opt->pud_info->pullup_dn_reg_add;
+ mask = opt->pud_info->pullup_dn_mask;
+
+ if (param == PIN_CONFIG_BIAS_DISABLE)
+ rval = opt->pud_info->normal_val;
+ else if (param == PIN_CONFIG_BIAS_PULL_UP)
+ rval = opt->pud_info->pull_up_val;
+ else
+ rval = opt->pud_info->pull_dn_val;
+
+ if (rval < 0) {
+ dev_err(pci->dev,
+ "PULL control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ break;
+
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ if (!opt->od_info) {
+ dev_err(pci->dev,
+ "OD control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ base = opt->od_info->od_reg_base;
+ add = opt->od_info->od_reg_add;
+ mask = opt->od_info->od_mask;
+ if (param_val == 0)
+ rval = opt->od_info->od_disable;
+ else
+ rval = opt->od_info->od_enable;
+ if (rval < 0) {
+ dev_err(pci->dev,
+ "OD control not supported for pin %s\n",
+ g->name);
+ return -ENOTSUPP;
+ }
+ break;
+ default:
+ dev_err(pci->dev, "Properties not supported\n");
+ return -ENOTSUPP;
+ }
+
+ dev_dbg(pci->dev, "%s(): Add0x%02x:0x%02x:0x%02x:0x%02x\n",
+ __func__, base, add, mask, rval);
+ ret = palmas_update_bits(pci->palmas, base, add, mask, rval);
+ if (ret < 0) {
+ dev_err(pci->dev, "Reg 0x%02x update failed: %d\n", add, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int palmas_pinconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned group, unsigned long *config)
+{
+ dev_err(pctldev->dev, "palmas_pinconf_group_get op not supported\n");
+ return -ENOTSUPP;
+}
+
+static int palmas_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group, unsigned long config)
+{
+ dev_err(pctldev->dev, "palmas_pinconf_group_set op not supported\n");
+ return -ENOTSUPP;
+}
+
+static const struct pinconf_ops palmas_pinconf_ops = {
+ .pin_config_get = palmas_pinconf_get,
+ .pin_config_set = palmas_pinconf_set,
+ .pin_config_group_get = palmas_pinconf_group_get,
+ .pin_config_group_set = palmas_pinconf_group_set,
+};
+
+static struct pinctrl_desc palmas_pinctrl_desc = {
+ .pctlops = &palmas_pinctrl_ops,
+ .pmxops = &palmas_pinmux_ops,
+ .confops = &palmas_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+struct palmas_pinctrl_data {
+ const struct palmas_pingroup *pin_groups;
+ int num_pin_groups;
+};
+
+static struct palmas_pinctrl_data tps65913_pinctrl_data = {
+ .pin_groups = tps65913_pingroups,
+ .num_pin_groups = ARRAY_SIZE(tps65913_pingroups),
+};
+
+static struct palmas_pinctrl_data tps80036_pinctrl_data = {
+ .pin_groups = tps80036_pingroups,
+ .num_pin_groups = ARRAY_SIZE(tps80036_pingroups),
+};
+
+static struct of_device_id palmas_pinctrl_of_match[] = {
+ { .compatible = "ti,palmas-pinctrl", .data = &tps65913_pinctrl_data},
+ { .compatible = "ti,tps65913-pinctrl", .data = &tps65913_pinctrl_data},
+ { .compatible = "ti,tps80036-pinctrl", .data = &tps80036_pinctrl_data},
+ { },
+};
+MODULE_DEVICE_TABLE(of, palmas_pinctrl_of_match);
+
+static int palmas_pinctrl_probe(struct platform_device *pdev)
+{
+ struct palmas_pctrl_chip_info *pci;
+ const struct palmas_pinctrl_data *pinctrl_data = &tps65913_pinctrl_data;
+ int ret;
+ bool enable_dvfs1 = false;
+ bool enable_dvfs2 = false;
+
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_device(palmas_pinctrl_of_match, &pdev->dev);
+ pinctrl_data = match->data;
+ enable_dvfs1 = of_property_read_bool(pdev->dev.of_node,
+ "ti,palmas-enable-dvfs1");
+ enable_dvfs2 = of_property_read_bool(pdev->dev.of_node,
+ "ti,palmas-enable-dvfs2");
+ }
+
+ pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL);
+ if (!pci) {
+ dev_err(&pdev->dev, "Malloc for pci failed\n");
+ return -ENOMEM;
+ }
+
+ pci->dev = &pdev->dev;
+ pci->palmas = dev_get_drvdata(pdev->dev.parent);
+
+ pci->pins = palmas_pins_desc;
+ pci->num_pins = ARRAY_SIZE(palmas_pins_desc);
+ pci->functions = palmas_pin_function;
+ pci->num_functions = ARRAY_SIZE(palmas_pin_function);
+ pci->pin_groups = pinctrl_data->pin_groups;
+ pci->num_pin_groups = pinctrl_data->num_pin_groups;
+
+ platform_set_drvdata(pdev, pci);
+
+ palmas_pinctrl_set_dvfs1(pci, enable_dvfs1);
+ palmas_pinctrl_set_dvfs2(pci, enable_dvfs2);
+ ret = palmas_pinctrl_get_pin_mux(pci);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Reading pinctrol option register failed: %d\n", ret);
+ return ret;
+ }
+
+ palmas_pinctrl_desc.name = dev_name(&pdev->dev);
+ palmas_pinctrl_desc.pins = palmas_pins_desc;
+ palmas_pinctrl_desc.npins = ARRAY_SIZE(palmas_pins_desc);
+ pci->pctl = pinctrl_register(&palmas_pinctrl_desc, &pdev->dev, pci);
+ if (!pci->pctl) {
+ dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int palmas_pinctrl_remove(struct platform_device *pdev)
+{
+ struct palmas_pctrl_chip_info *pci = platform_get_drvdata(pdev);
+
+ pinctrl_unregister(pci->pctl);
+ return 0;
+}
+
+static struct platform_driver palmas_pinctrl_driver = {
+ .driver = {
+ .name = "palmas-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = palmas_pinctrl_of_match,
+ },
+ .probe = palmas_pinctrl_probe,
+ .remove = palmas_pinctrl_remove,
+};
+
+module_platform_driver(palmas_pinctrl_driver);
+
+MODULE_DESCRIPTION("Palmas pin control driver");
+MODULE_AUTHOR("Laxman Dewangan<ldewangan@nvidia.com>");
+MODULE_ALIAS("platform:palmas-pinctrl");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 1a8dd7a..2891f7c 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -449,7 +449,7 @@ enum usb_irq_events {
#define PALMAS_DVFS_BASE 0x180
#define PALMAS_PMU_CONTROL_BASE 0x1A0
#define PALMAS_RESOURCE_BASE 0x1D4
-#define PALMAS_PU_PD_OD_BASE 0x1F4
+#define PALMAS_PU_PD_OD_BASE 0x1F0
#define PALMAS_LED_BASE 0x200
#define PALMAS_INTERRUPT_BASE 0x210
#define PALMAS_USB_OTG_BASE 0x250
@@ -1734,16 +1734,20 @@ enum usb_irq_events {
#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0

/* Registers for function PAD_CONTROL */
-#define PALMAS_PU_PD_INPUT_CTRL1 0x0
-#define PALMAS_PU_PD_INPUT_CTRL2 0x1
-#define PALMAS_PU_PD_INPUT_CTRL3 0x2
-#define PALMAS_OD_OUTPUT_CTRL 0x4
-#define PALMAS_POLARITY_CTRL 0x5
-#define PALMAS_PRIMARY_SECONDARY_PAD1 0x6
-#define PALMAS_PRIMARY_SECONDARY_PAD2 0x7
-#define PALMAS_I2C_SPI 0x8
-#define PALMAS_PU_PD_INPUT_CTRL4 0x9
-#define PALMAS_PRIMARY_SECONDARY_PAD3 0xA
+#define PALMAS_OD_OUTPUT_CTRL2 0x2
+#define PALMAS_POLARITY_CTRL2 0x3
+#define PALMAS_PU_PD_INPUT_CTRL1 0x4
+#define PALMAS_PU_PD_INPUT_CTRL2 0x5
+#define PALMAS_PU_PD_INPUT_CTRL3 0x6
+#define PALMAS_PU_PD_INPUT_CTRL5 0x7
+#define PALMAS_OD_OUTPUT_CTRL 0x8
+#define PALMAS_POLARITY_CTRL 0x9
+#define PALMAS_PRIMARY_SECONDARY_PAD1 0xA
+#define PALMAS_PRIMARY_SECONDARY_PAD2 0xB
+#define PALMAS_I2C_SPI 0xC
+#define PALMAS_PU_PD_INPUT_CTRL4 0xD
+#define PALMAS_PRIMARY_SECONDARY_PAD3 0xE
+#define PALMAS_PRIMARY_SECONDARY_PAD4 0xF

/* Bit definitions for PU_PD_INPUT_CTRL1 */
#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD 0x40
@@ -2501,6 +2505,15 @@ enum usb_irq_events {
#define PALMAS_PU_PD_GPIO_CTRL1 0x6
#define PALMAS_PU_PD_GPIO_CTRL2 0x7
#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x8
+#define PALMAS_GPIO_DATA_IN2 0x9
+#define PALMAS_GPIO_DATA_DIR2 0x0A
+#define PALMAS_GPIO_DATA_OUT2 0x0B
+#define PALMAS_GPIO_DEBOUNCE_EN2 0x0C
+#define PALMAS_GPIO_CLEAR_DATA_OUT2 0x0D
+#define PALMAS_GPIO_SET_DATA_OUT2 0x0E
+#define PALMAS_PU_PD_GPIO_CTRL3 0x0F
+#define PALMAS_PU_PD_GPIO_CTRL4 0x10
+#define PALMAS_OD_OUTPUT_GPIO_CTRL2 0x11

/* Bit definitions for GPIO_DATA_IN */
#define PALMAS_GPIO_DATA_IN_GPIO_7_IN 0x80
--
1.7.1.1


\
 
 \ /
  Last update: 2013-08-05 09:41    [W:0.307 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site