lkml.org 
[lkml]   [2013]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 14/20] tile PCI RC: bomb comments and whitespace format
This change is purely stylistic but improves the readability
of the tile PCI RC driver.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
arch/tile/kernel/pci_gx.c | 180 +++++++++++++++-------------------------------
1 file changed, 56 insertions(+), 124 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index 6837be2..8352d85 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -108,17 +108,15 @@ static struct pci_ops tile_cfg_ops;
/* Mask of CPUs that should receive PCIe interrupts. */
static struct cpumask intr_cpus_map;

-/*
- * We don't need to worry about the alignment of resources.
- */
+/* We don't need to worry about the alignment of resources. */
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
+ resource_size_t size,
+ resource_size_t align)
{
return res->start;
}
EXPORT_SYMBOL(pcibios_align_resource);

-
/*
* Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #.
* For now, we simply send interrupts to non-dataplane CPUs.
@@ -146,25 +144,19 @@ static int tile_irq_cpu(int irq)
return cpu;
}

-/*
- * Open a file descriptor to the TRIO shim.
- */
+/* Open a file descriptor to the TRIO shim. */
static int tile_pcie_open(int trio_index)
{
gxio_trio_context_t *context = &trio_contexts[trio_index];
int ret;
int mac;

- /*
- * This opens a file descriptor to the TRIO shim.
- */
+ /* This opens a file descriptor to the TRIO shim. */
ret = gxio_trio_init(context, trio_index);
if (ret < 0)
goto gxio_trio_init_failure;

- /*
- * Allocate an ASID for the kernel.
- */
+ /* Allocate an ASID for the kernel. */
ret = gxio_trio_alloc_asids(context, 1, 0, 0);
if (ret < 0) {
pr_err("PCI: ASID alloc failure on TRIO %d, give up\n",
@@ -285,20 +277,17 @@ static int __init tile_trio_init(void)
}
postcore_initcall(tile_trio_init);

-static void
-tilegx_legacy_irq_ack(struct irq_data *d)
+static void tilegx_legacy_irq_ack(struct irq_data *d)
{
__insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
}

-static void
-tilegx_legacy_irq_mask(struct irq_data *d)
+static void tilegx_legacy_irq_mask(struct irq_data *d)
{
__insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
}

-static void
-tilegx_legacy_irq_unmask(struct irq_data *d)
+static void tilegx_legacy_irq_unmask(struct irq_data *d)
{
__insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
}
@@ -319,8 +308,7 @@ static struct irq_chip tilegx_legacy_irq_chip = {
* to Linux which just calls handle_level_irq() after clearing the
* MAC INTx Assert status bit associated with this interrupt.
*/
-static void
-trio_handle_level_irq(unsigned int irq, struct irq_desc *desc)
+static void trio_handle_level_irq(unsigned int irq, struct irq_desc *desc)
{
struct pci_controller *controller = irq_desc_get_handler_data(desc);
gxio_trio_context_t *trio_context = controller->trio;
@@ -386,9 +374,7 @@ static int tile_init_irqs(struct pci_controller *controller)
goto free_irqs;
}

- /*
- * Register the IRQ handler with the kernel.
- */
+ /* Register the IRQ handler with the kernel. */
irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip,
trio_handle_level_irq);
irq_set_chip_data(irq, (void *)(uint64_t)i);
@@ -471,15 +457,11 @@ int __init tile_pci_init(void)
}
}

- /*
- * Return if no PCIe ports are configured to operate in RC mode.
- */
+ /* Return if no PCIe ports are configured to operate in RC mode. */
if (num_rc_controllers == 0)
return 0;

- /*
- * Set the TRIO pointer and MAC index for each PCIe RC port.
- */
+ /* Set the TRIO pointer and MAC index for each PCIe RC port. */
for (i = 0; i < TILEGX_NUM_TRIO; i++) {
for (j = 0; j < TILEGX_TRIO_PCIES; j++) {
if (pcie_rc[i][j]) {
@@ -495,14 +477,10 @@ int __init tile_pci_init(void)
}

out:
- /*
- * Configure each PCIe RC port.
- */
+ /* Configure each PCIe RC port. */
for (i = 0; i < num_rc_controllers; i++) {
- /*
- * Configure the PCIe MAC to run in RC mode.
- */

+ /* Configure the PCIe MAC to run in RC mode. */
struct pci_controller *controller = &pci_controllers[i];

controller->index = i;
@@ -525,7 +503,6 @@ out:
* is in range [3GB, 4GB - 1] of a 4GB space beyond the
* PA space.
*/
-
controller->mem_offset = TILE_PCI_MEM_START +
(i * TILE_PCI_BAR_WINDOW_TOP);
controller->mem_space.start = controller->mem_offset +
@@ -553,7 +530,6 @@ static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin)
return controller->irq_intx_table[pin - 1];
}

-
static void fixup_read_and_payload_sizes(struct pci_controller *controller)
{
gxio_trio_context_t *trio_context = controller->trio;
@@ -567,9 +543,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)

mac = controller->mac;

- /*
- * Set our max read request size to be 4KB.
- */
+ /* Set our max read request size to be 4KB. */
reg_offset =
(TRIO_PCIE_RC_DEVICE_CONTROL <<
TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -578,10 +552,10 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);

dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
- reg_offset);
+ reg_offset);
dev_control.max_read_req_sz = 5;
__gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
- dev_control.word);
+ dev_control.word);

/*
* Set the max payload size supported by this Gx PCIe MAC.
@@ -597,10 +571,10 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);

rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
- reg_offset);
+ reg_offset);
rc_dev_cap.mps_sup = 1;
__gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
- rc_dev_cap.word);
+ rc_dev_cap.word);

/* Configure PCI Express MPS setting. */
list_for_each_entry(child, &root_bus->children, node) {
@@ -628,7 +602,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
dev_control.max_payload_size,
dev_control.max_read_req_sz,
mac);
- if (err < 0) {
+ if (err < 0) {
pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, "
"MAC %d on TRIO %d\n",
mac, controller->trio_index);
@@ -672,9 +646,7 @@ static int setup_pcie_rc_delay(char *str)
}
early_param("pcie_rc_delay", setup_pcie_rc_delay);

-/*
- * PCI initialization entry point, called by subsys_initcall.
- */
+/* PCI initialization entry point, called by subsys_initcall. */
int __init pcibios_init(void)
{
resource_size_t offset;
@@ -744,9 +716,7 @@ int __init pcibios_init(void)
pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i,
trio_index, controller->mac);

- /*
- * Delay the bus probe if needed.
- */
+ /* Delay the bus probe if needed. */
if (rc_delay[trio_index][mac]) {
pr_info("Delaying PCIe RC bus enumerating %d sec"
" on MAC %d on TRIO %d\n",
@@ -761,9 +731,7 @@ int __init pcibios_init(void)
msleep(1000);
}

- /*
- * Check for PCIe link-up status again.
- */
+ /* Check for PCIe link-up status again. */
port_status.word =
__gxio_mmio_read(trio_context->mmio_base_mac +
reg_offset);
@@ -801,7 +769,6 @@ int __init pcibios_init(void)
* Change the device ID so that Linux bus crawl doesn't confuse
* the internal bridge with any Tilera endpoints.
*/
-
reg_offset =
(TRIO_PCIE_RC_DEVICE_ID_VEN_ID <<
TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -814,10 +781,7 @@ int __init pcibios_init(void)
TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) |
TILERA_VENDOR_ID);

- /*
- * Set the internal P2P bridge class code.
- */
-
+ /* Set the internal P2P bridge class code. */
reg_offset =
(TRIO_PCIE_RC_REVISION_ID <<
TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -828,26 +792,22 @@ int __init pcibios_init(void)
class_code_revision =
__gxio_mmio_read32(trio_context->mmio_base_mac +
reg_offset);
- class_code_revision = (class_code_revision & 0xff ) |
- (PCI_CLASS_BRIDGE_PCI << 16);
+ class_code_revision = (class_code_revision & 0xff) |
+ (PCI_CLASS_BRIDGE_PCI << 16);

__gxio_mmio_write32(trio_context->mmio_base_mac +
reg_offset, class_code_revision);

#ifdef USE_SHARED_PCIE_CONFIG_REGION

- /*
- * Map in the MMIO space for the PIO region.
- */
+ /* Map in the MMIO space for the PIO region. */
offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) |
(((unsigned long long)mac) <<
TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT);

#else

- /*
- * Alloc a PIO region for PCI config access per MAC.
- */
+ /* Alloc a PIO region for PCI config access per MAC. */
ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
if (ret < 0) {
pr_err("PCI: PCI CFG PIO alloc failure for mac %d "
@@ -858,9 +818,7 @@ int __init pcibios_init(void)

trio_context->pio_cfg_index[mac] = ret;

- /*
- * For PIO CFG, the bus_address_hi parameter is 0.
- */
+ /* For PIO CFG, the bus_address_hi parameter is 0. */
ret = gxio_trio_init_pio_region_aux(trio_context,
trio_context->pio_cfg_index[mac],
mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE);
@@ -887,9 +845,7 @@ int __init pcibios_init(void)
continue;
}

- /*
- * Initialize the PCIe interrupts.
- */
+ /* Initialize the PCIe interrupts. */
if (tile_init_irqs(controller)) {
pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n",
mac, trio_index);
@@ -921,7 +877,6 @@ int __init pcibios_init(void)
* It allocates all of the resources (I/O memory, etc)
* associated with the devices read in above.
*/
-
pci_assign_unassigned_resources();

/* Record the I/O resources in the PCI controller structure. */
@@ -942,14 +897,12 @@ int __init pcibios_init(void)
/* Configure the max_payload_size values for this domain. */
fixup_read_and_payload_sizes(controller);

- /*
- * Alloc a PIO region for PCI memory access for each RC port.
- */
+ /* Alloc a PIO region for PCI memory access for each RC port. */
ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
if (ret < 0) {
pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, "
- "give up\n", controller->trio_index,
- controller->mac);
+ "give up\n", controller->trio_index,
+ controller->mac);

continue;
}
@@ -967,8 +920,8 @@ int __init pcibios_init(void)
0);
if (ret < 0) {
pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, "
- "give up\n", controller->trio_index,
- controller->mac);
+ "give up\n", controller->trio_index,
+ controller->mac);

continue;
}
@@ -980,8 +933,8 @@ int __init pcibios_init(void)
ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
if (ret < 0) {
pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, "
- "give up\n", controller->trio_index,
- controller->mac);
+ "give up\n", controller->trio_index,
+ controller->mac);

continue;
}
@@ -999,8 +952,8 @@ int __init pcibios_init(void)
HV_TRIO_PIO_FLAG_IO_SPACE);
if (ret < 0) {
pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, "
- "give up\n", controller->trio_index,
- controller->mac);
+ "give up\n", controller->trio_index,
+ controller->mac);

continue;
}
@@ -1020,9 +973,9 @@ int __init pcibios_init(void)
0);
if (ret < 0) {
pr_err("PCI: Mem-Map alloc failure on TRIO %d "
- "mac %d for MC %d, give up\n",
- controller->trio_index,
- controller->mac, j);
+ "mac %d for MC %d, give up\n",
+ controller->trio_index,
+ controller->mac, j);

goto alloc_mem_map_failed;
}
@@ -1053,9 +1006,9 @@ int __init pcibios_init(void)
GXIO_TRIO_ORDER_MODE_UNORDERED);
if (ret < 0) {
pr_err("PCI: Mem-Map init failure on TRIO %d "
- "mac %d for MC %d, give up\n",
- controller->trio_index,
- controller->mac, j);
+ "mac %d for MC %d, give up\n",
+ controller->trio_index,
+ controller->mac, j);

goto alloc_mem_map_failed;
}
@@ -1064,22 +1017,18 @@ int __init pcibios_init(void)
alloc_mem_map_failed:
break;
}
-
}

return 0;
}
subsys_initcall(pcibios_init);

-/* Note: to be deleted after Linux 3.6 merge. */
+/* No bus fixups needed. */
void pcibios_fixup_bus(struct pci_bus *bus)
{
}

-/*
- * This can be called from the generic PCI layer, but doesn't need to
- * do anything.
- */
+/* Process any "pci=" kernel boot arguments. */
char *pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
@@ -1130,7 +1079,6 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
* By searching phys_addr in each controller's mem_space, we can
* determine the controller that should accept the PCI memory access.
*/
-
for (i = 0; i < num_rc_controllers; i++) {
/*
* Skip controllers that are not properly initialized or
@@ -1158,9 +1106,7 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)

offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start;

- /*
- * We need to keep the PCI bus address's in-page offset in the VA.
- */
+ /* We need to keep the PCI bus address's in-page offset in the VA. */
return iorpc_ioremap(trio_fd, offset, size) +
(start & (PAGE_SIZE - 1));
}
@@ -1186,7 +1132,6 @@ void __iomem *ioport_map(unsigned long port, unsigned int size)
* By searching the port in each controller's io_space, we can
* determine the controller that should accept the PCI I/O access.
*/
-
for (i = 0; i < num_rc_controllers; i++) {
/*
* Skip controllers that are not properly initialized or
@@ -1214,9 +1159,7 @@ void __iomem *ioport_map(unsigned long port, unsigned int size)

offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port;

- /*
- * We need to keep the PCI bus address's in-page offset in the VA.
- */
+ /* We need to keep the PCI bus address's in-page offset in the VA. */
return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1));
}
EXPORT_SYMBOL(ioport_map);
@@ -1249,7 +1192,6 @@ EXPORT_SYMBOL(pci_iounmap);
* offset is in bytes, from the start of config space for the
* specified bus & device.
*/
-
static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
int size, u32 *val)
{
@@ -1299,7 +1241,6 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
* Accesses to the directly attached device have to be
* sent as type-0 configs.
*/
-
if (busnum == (controller->first_busno + 1)) {
/*
* There is only one device off of our built-in P2P bridge.
@@ -1321,9 +1262,8 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
* Note that we don't set the mac field in cfg_addr because the
* mapping is per port.
*/
-
mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
- cfg_addr.word;
+ cfg_addr.word;

valid_device:

@@ -1427,7 +1367,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
* Accesses to the directly attached device have to be
* sent as type-0 configs.
*/
-
if (busnum == (controller->first_busno + 1)) {
/*
* There is only one device off of our built-in P2P bridge.
@@ -1449,7 +1388,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
* Note that we don't set the mac field in cfg_addr because the
* mapping is per port.
*/
-
mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
cfg_addr.word;

@@ -1487,11 +1425,8 @@ static struct pci_ops tile_cfg_ops = {
};


-/*
- * MSI support starts here.
- */
-static unsigned int
-tilegx_msi_startup(struct irq_data *d)
+/* MSI support starts here. */
+static unsigned int tilegx_msi_startup(struct irq_data *d)
{
if (d->msi_desc)
unmask_msi_irq(d);
@@ -1499,21 +1434,18 @@ tilegx_msi_startup(struct irq_data *d)
return 0;
}

-static void
-tilegx_msi_ack(struct irq_data *d)
+static void tilegx_msi_ack(struct irq_data *d)
{
__insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
}

-static void
-tilegx_msi_mask(struct irq_data *d)
+static void tilegx_msi_mask(struct irq_data *d)
{
mask_msi_irq(d);
__insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
}

-static void
-tilegx_msi_unmask(struct irq_data *d)
+static void tilegx_msi_unmask(struct irq_data *d)
{
__insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
unmask_msi_irq(d);
--
1.8.3.1


\
 
 \ /
  Last update: 2013-08-05 23:21    [W:0.728 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site