lkml.org 
[lkml]   [2013]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCHv3 08/10] ARM: sunxi: dt: Add PIO controller to A31 DTSI
    Date
    The A31 has a different set of pins than the one found on the A10 and
    A13. Now that we have support for the A31 pin set in the pinctrl driver,
    we can enable it in the DTSI with its own compatible.

    Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
    ---
    arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++++++++
    1 file changed, 12 insertions(+)

    diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
    index 45487e4..2bf6404 100644
    --- a/arch/arm/boot/dts/sun6i-a31.dtsi
    +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
    @@ -66,6 +66,18 @@
    #size-cells = <1>;
    ranges;

    + pio: pinctrl@01c20800 {
    + compatible = "allwinner,sun6i-a31-pinctrl";
    + reg = <0x01c20800 0x400>;
    + interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
    + clocks = <&osc>;
    + gpio-controller;
    + interrupt-controller;
    + #address-cells = <1>;
    + #size-cells = <0>;
    + #gpio-cells = <3>;
    + };
    +
    timer@01c20c00 {
    compatible = "allwinner,sun4i-timer";
    reg = <0x01c20c00 0xa0>;
    --
    1.8.3.4


    \
     
     \ /
      Last update: 2013-08-04 12:01    [W:5.204 / U:0.844 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site