[lkml]   [2013]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH RFC v2 0/6] ARM: Initial support for Marvell Armada 1500
    This is the second RFC to add initial support for the Marvell Armada 1500
    (88DE3100) found on various consumer devices. The changes compared to v1
    have been quite fundamental, so I'll also summarize them in this cover letter.

    I have addressed the following comments given during v1:
    - moved to new mach-berlin subdir to reflect the difference from Armada 370/XP.
    - removed redundant map_io hook and reduced DT soc range
    - added SoC binding documentation
    - added to Marvell SoC documentation
    - have extra DEBUG_ Kconfig option for Marvell Berlin SoCs
    - build with multi_v7_defconfig
    - reorder things alphabetically

    Comments I have not addressed:
    - left .init_time hook as common arch clock init is currently under
    discussion in a separate patch set (comment added)
    - left non-DT l2x0_of_init as I was allowed to choose only one cleanup
    out of the two prerequesites (comment added)

    Also, I added copyright credits to the Asus Cube GPL'ed 2.6 kernel
    source I was using as datasheet replacement. I have taken virtually
    nothing out of it except register offsets, irq numbers, and clock
    hierarchy. Actually, I would even put Marvell's direct copyright into
    it just because I'd love to see them to continue their community efforts
    they have started in the past. Anyway, I am not affiliated with Marvell,
    so I cannot just make them resposible for the current, rudimentary SoC
    skeleton patches.

    This time the patches have been based on linux-next's next-20130827
    tag, which better reflects the targeted 1 or 2 merge windows.

    Sebastian Hesselbarth (6):
    irqchip: add DesignWare APB ICTL interrupt controller
    ARM: add Marvell Berlin SoC familiy to Marvell doc
    ARM: add Marvell Berlin and Armada 1500 to multi_v7_defconfig
    ARM: add Marvell Berlin UART0 lowlevel debug
    ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
    ARM: add initial support for Marvell Berlin SoCs

    Documentation/arm/Marvell/README | 22 ++
    .../devicetree/bindings/arm/marvell,berlin.txt | 23 ++
    .../interrupt-controller/snps,dw-apb-ictl.txt | 29 +++
    arch/arm/Kconfig | 2 +
    arch/arm/Kconfig.debug | 10 +
    arch/arm/Makefile | 1 +
    arch/arm/boot/dts/Makefile | 2 +
    arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts | 29 +++
    arch/arm/boot/dts/mv88de3100.dtsi | 222 ++++++++++++++++++++
    arch/arm/configs/multi_v7_defconfig | 2 +
    arch/arm/mach-berlin/Kconfig | 24 ++
    arch/arm/mach-berlin/Makefile | 1 +
    arch/arm/mach-berlin/berlin.c | 49 +++++
    drivers/irqchip/Kconfig | 4 +
    drivers/irqchip/Makefile | 1 +
    drivers/irqchip/irq-dw-apb-ictl.c | 142 +++++++++++++
    16 files changed, 563 insertions(+), 0 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt
    create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
    create mode 100644 arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts
    create mode 100644 arch/arm/boot/dts/mv88de3100.dtsi
    create mode 100644 arch/arm/mach-berlin/Kconfig
    create mode 100644 arch/arm/mach-berlin/Makefile
    create mode 100644 arch/arm/mach-berlin/berlin.c
    create mode 100644 drivers/irqchip/irq-dw-apb-ictl.c

    Cc: Russell King <>
    Cc: Arnd Bergmann <>
    Cc: Jason Cooper <>
    Cc: Thomas Petazzoni <>

     \ /
      Last update: 2013-08-28 02:21    [W:0.038 / U:13.428 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site