lkml.org 
[lkml]   [2013]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 2/3] pinctrl: at91: add support for generic pinconf
On 20:45 Mon 26 Aug     , boris brezillon wrote:
> Hello Jean-Christophe,
>
> Le 26/08/2013 19:53, Jean-Christophe PLAGNIOL-VILLARD a écrit :
> >On 23:37 Sat 24 Aug , Boris BREZILLON wrote:
> >>Add support for generic pin configuration to pinctrl-at91 driver.
> >>
> >>Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> >>---
> >> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 43 +++-
> >> drivers/pinctrl/Kconfig | 2 +-
> >> drivers/pinctrl/pinctrl-at91.c | 265 ++++++++++++++++++--
> >> 3 files changed, 289 insertions(+), 21 deletions(-)
> >>
> >>diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> >>index 7ccae49..7a7c0c4 100644
> >>--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> >>+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> >>@@ -18,7 +18,9 @@ mode) this pin can work on and the 'config' configures various pad settings
> >> such as pull-up, multi drive, etc.
> >> Required properties for iomux controller:
> >>-- compatible: "atmel,at91rm9200-pinctrl"
> >>+- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl".
> >>+ Add "generic-pinconf" to the compatible string list to use the generic pin
> >>+ configuration syntax.
> >> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
> >> configured in this periph mode. All the periph and bank need to be describe.
> >>@@ -83,6 +85,11 @@ Required properties for pin configuration node:
> >> setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
> >> The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
> >> PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
> >>+ Dependending on the presence of the "generic-pinconf" string in the
> >>+ compatible property the 4th cell is:
> >>+ * a phandle referencing a generic pin config node (refer to
> >>+ pinctrl-bindings.txt)
> >>+ * an integer defining the pin config (see the following description)
> >> Bits used for CONFIG:
> >> PULL_UP (1 << 0): indicate this pin need a pull up.
> >>@@ -132,6 +139,40 @@ pinctrl@fffff400 {
> >> };
> >> };
> >>+or
> >>+
> >>+pinctrl@fffff400 {
> >>+ #address-cells = <1>;
> >>+ #size-cells = <1>;
> >>+ ranges;
> >>+ compatible = "atmel,at91rm9200-pinctrl", "generic-pinconf", "simple-bus";
> >nack your break the backword compatibility
> >
> >if we use a old kernel with this new dt nothing will work
> >as the old kernel will never known the the "generic-pinconf" means anything
>
> Your're right, I didn't think of this case (old kernel with new dt).
>
> >if we want to use generic-pinconf support you *CAN NOT* use atmel,at91rm9200-pinctrl
> >in the compatible
>
> What about using "atmel,at91xx-pinconf" instead of
> "atmel,at91xx-pinctrl" to notify
> the generic pinconf compatibility (as done by single pinctrl driver) ?
no as the rm9200 IP and sam9x5 IP are only partially compatible
you MUST distinguish them

>
> >>+ reg = <0xfffff400 0x600>;
> >>+
> >>+ atmel,mux-mask = <
> >>+ /* A B */
> >>+ 0xffffffff 0xffc00c3b /* pioA */
> >>+ 0xffffffff 0x7fff3ccf /* pioB */
> >>+ 0xffffffff 0x007fffff /* pioC */
> >>+ >;
> >>+
> >>+ pcfg_none: pcfg_none {
> >>+ bias-disable;
> >>+ };
> >>+
> >>+ pcfg_pull_up: pcfg_pull_up {
> >>+ bias-pullup;
> >>+ };
> >>+
> >>+ /* shared pinctrl settings */
> >>+ dbgu {
> >>+ pinctrl_dbgu: dbgu-0 {
> >>+ atmel,pins =
> >>+ <1 14 0x1 &pcfg_none /* PB14 periph A */
> >>+ 1 15 0x1 &pcfg_pull_up>; /* PB15 periph A with pullup */
> >>+ };
> >>+ };
> >>+};
> >>+
> >> dbgu: serial@fffff200 {
> >> compatible = "atmel,at91sam9260-usart";
> >> reg = <0xfffff200 0x200>;
> >>diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> >>index bdb1a87..55a4f2c 100644
> >>--- a/drivers/pinctrl/Kconfig
> >>+++ b/drivers/pinctrl/Kconfig
> >>@@ -54,7 +54,7 @@ config PINCTRL_AT91
> >> depends on OF
> >> depends on ARCH_AT91
> >> select PINMUX
> >>- select PINCONF
> >>+ select GENERIC_PINCONF
> >> help
> >> Say Y here to enable the at91 pinctrl driver
> >>diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> >>index 7cce066..1994dd2 100644
> >>--- a/drivers/pinctrl/pinctrl-at91.c
> >>+++ b/drivers/pinctrl/pinctrl-at91.c
> >>@@ -23,6 +23,7 @@
> >> #include <linux/gpio.h>
> >> #include <linux/pinctrl/machine.h>
> >> #include <linux/pinctrl/pinconf.h>
> >>+#include <linux/pinctrl/pinconf-generic.h>
> >> #include <linux/pinctrl/pinctrl.h>
> >> #include <linux/pinctrl/pinmux.h>
> >> /* Since we request GPIOs from ourself */
> >>@@ -32,6 +33,7 @@
> >> #include <mach/at91_pio.h>
> >> #include "core.h"
> >>+#include "pinconf.h"
> >> #define MAX_NB_GPIO_PER_BANK 32
> >>@@ -85,6 +87,21 @@ enum at91_mux {
> >> AT91_MUX_PERIPH_D = 4,
> >> };
> >>+struct at91_generic_pinconf {
> >>+ unsigned long *configs;
> >>+ unsigned int nconfigs;
> >>+};
> >>+
> >>+enum at91_pinconf_type {
> >>+ AT91_PINCONF_NATIVE,
> >>+ AT91_PINCONF_GENERIC,
> >>+};
> >>+
> >>+union at91_pinconf {
> >>+ unsigned long native;
> >>+ struct at91_generic_pinconf generic;
> >>+};
> >>+
> >> /**
> >> * struct at91_pmx_pin - describes an At91 pin mux
> >> * @bank: the bank of the pin
> >>@@ -93,10 +110,11 @@ enum at91_mux {
> >> * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
> >> */
> >> struct at91_pmx_pin {
> >>- uint32_t bank;
> >>- uint32_t pin;
> >>- enum at91_mux mux;
> >>- unsigned long conf;
> >>+ uint32_t bank;
> >>+ uint32_t pin;
> >>+ enum at91_mux mux;
> >>+ enum at91_pinconf_type conftype;
> >>+ union at91_pinconf conf;
> >> };
> >> /**
> >>@@ -278,8 +296,16 @@ static int at91_dt_node_to_map(struct pinctrl_dev *pctldev,
> >> new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
> >> new_map[i].data.configs.group_or_pin =
> >> pin_get_name(pctldev, grp->pins[i]);
> >>- new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
> >>- new_map[i].data.configs.num_configs = 1;
> >>+ if (!pctldev->desc->confops->is_generic) {
> >>+ new_map[i].data.configs.configs =
> >>+ &grp->pins_conf[i].conf.native;
> >>+ new_map[i].data.configs.num_configs = 1;
> >>+ } else {
> >>+ new_map[i].data.configs.configs =
> >>+ grp->pins_conf[i].conf.generic.configs;
> >>+ new_map[i].data.configs.num_configs =
> >>+ grp->pins_conf[i].conf.generic.nconfigs;
> >>+ }
> >> }
> >> dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
> >>@@ -325,7 +351,7 @@ static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
> >> static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin)
> >> {
> >>- return (readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1;
> >>+ return !((readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1);
> >> }
> >> static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
> >>@@ -407,6 +433,16 @@ static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
> >> return select + 1;
> >> }
> >>+static bool at91_mux_get_output(void __iomem *pio, unsigned pin)
> >>+{
> >>+ return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1;
> >>+}
> >>+
> >>+static void at91_mux_set_output(void __iomem *pio, unsigned mask, bool is_on)
> >>+{
> >>+ __raw_writel(mask, pio + (is_on ? PIO_OER : PIO_ODR));
> >>+}
> >>+
> >> static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
> >> {
> >> return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
> >>@@ -445,7 +481,7 @@ static void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
> >> static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
> >> {
> >>- return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
> >>+ return !((__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1);
> >> }
> >> static void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
> >>@@ -492,12 +528,17 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
> >> static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
> >> {
> >> if (pin->mux) {
> >>- dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
> >>- pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
> >>+ dev_dbg(dev, "pio%c%d configured as periph%c",
> >>+ pin->bank + 'A', pin->pin, pin->mux - 1 + 'A');
> >> } else {
> >>- dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
> >>- pin->bank + 'A', pin->pin, pin->conf);
> >>+ dev_dbg(dev, "pio%c%d configured as gpio",
> >>+ pin->bank + 'A', pin->pin);
> >> }
> >>+
> >>+ if (pin->conftype == AT91_PINCONF_NATIVE)
> >>+ dev_dbg(dev, " with conf = 0x%lu\n", pin->conf.native);
> >>+ else
> >>+ dev_dbg(dev, "\n");
> >do not change debug output
>
> I do not change the debug output for the native pinconf binding, but
> I cannot print the config as
> a single interger in hex format if the generic pinconf is used.
> I must translate each config entry to a "property=value" string, or
> translate the generic config
> array to a single native config integer.
>
> Do you have something easier in mind ?

no but I do not want to brake current automatic test tools

propose something with this in mind

Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-26 22:21    [W:0.156 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site