lkml.org 
[lkml]   [2013]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] pinctrl: queue GPIO operations instead of defering
On 08/19/2013 01:21 PM, Stephen Warren wrote:
> On 08/17/2013 08:56 AM, Linus Walleij wrote:
>> We currently defer probing of the caller if a pinctrl GPIO
>> request or direction setting comes in before the range mapping
>> a certain GPIO to a certain pin controller is available.
>>
>> This can end up with a circular dependency: the GPIO driver
>> needs the pin controller to be ready and the pin controller
>> need the GPIO driver to be ready. This also happens if
>> pin controllers and GPIO controllers compiled as modules
>> are inserted in a certain order.
>>
>> To break this circular dependence, queue any GPIO
>> operations coming to the framework until the range is ready,
>> instead of deferring the probe of the caller.
>
> I just noticed that next-20130819 is failing on the Tegra114 Dalmore
> board because of this patch. The kernel log is below. Reverting this
> patch solves the problem

Linus, any thoughts here?

>> [ 12.427751] tegra114-pinctrl 70000868.pinmux: pin USB_VBUS_EN0 PN4 already requested by Tegra GPIOs:108; cannot claim for Tegra GPIOs:108
>> [ 12.440320] tegra114-pinctrl 70000868.pinmux: pin-108 (Tegra GPIOs:108) status -22
>> [ 12.447965] usb1_vbus: Failed to request enable GPIO108: -22
>> [ 12.454306] reg-fixed-voltage 3.regulator: Failed to register regulator: -22
>> [ 12.461508] reg-fixed-voltage: probe of 3.regulator failed with error -22
>> [ 12.469659] tegra114-pinctrl 70000868.pinmux: pin SPDIF_IN PK6 already requested by Tegra GPIOs:86; cannot claim for Tegra GPIOs:86
>> [ 12.481606] tegra114-pinctrl 70000868.pinmux: pin-86 (Tegra GPIOs:86) status -22
>> [ 12.489052] usb2_vbus: Failed to request enable GPIO86: -22
>> [ 12.495226] reg-fixed-voltage 4.regulator: Failed to register regulator: -22
>> [ 12.502449] reg-fixed-voltage: probe of 4.regulator failed with error -22
>> [ 12.510542] tegra114-pinctrl 70000868.pinmux: pin GMI_CLK PK1 already requested by Tegra GPIOs:81; cannot claim for Tegra GPIOs:81
>> [ 12.522403] tegra114-pinctrl 70000868.pinmux: pin-81 (Tegra GPIOs:81) status -22
>> [ 12.529896] vdd_hdmi_5v0: Failed to request enable GPIO81: -22
>> [ 12.536281] reg-fixed-voltage 5.regulator: Failed to register regulator: -22
>> [ 12.543465] reg-fixed-voltage: probe of 5.regulator failed with error -22
>> [ 12.552509] vdd_cam_1v8_reg: 1800 mV
>> [ 12.558205] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
>> [ 12.566600] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
>> [ 12.577475] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input1
>> [ 12.588329] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
>> [ 12.596967] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral



\
 
 \ /
  Last update: 2013-08-21 20:21    [W:0.052 / U:2.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site