lkml.org 
[lkml]   [2013]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
From
Date
On Tue, 2013-08-20 at 18:01 +0100, Pawel Moll wrote: 
> On Tue, 2013-08-20 at 16:06 +0100, Pawel Moll wrote:
> > On Tue, 2013-08-20 at 16:01 +0100, Kumar Gala wrote:
> > > On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:
> > >
> > > >
> > > > Hi,
> > > >
> > > > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote:
> > > >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
> > > >>> Hi,
> > > >>>
> > > >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote:
> > > >>>> Hi,
> > > >>>>
> > > >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
> > > >>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote:
> > > >>>>>>> From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> > > >>>>>>>
> > > >>>>>>> These drivers handles control and configuration of the HS
> > > >>>>>>> and SS USB PHY transceivers. They are part of the driver
> > > >>>>>>> which manage Synopsys DesignWare USB3 controller stack
> > > >>>>>>> inside Qualcomm SoC's.
> > > >>>>>>>
> > > >>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > > >>>>>>> ---
> > > >>>>>>> drivers/usb/phy/Kconfig | 11 ++
> > > >>>>>>> drivers/usb/phy/Makefile | 2 +
> > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c | 327 ++++++++++++++++++++++++++++++++
> > > >>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c | 374 +++++++++++++++++++++++++++++++++++++
> > > >>>>>>
> > > >>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs
> > > >>>>>> don't care about the USB controller.
> > > >>>>>
> > > >>>>> I think they are SNPS DesignWare PHY's, additionally
> > > >>>>> wrapped with Qualcomm logic. I could substitute "dwc3"
> > > >>>>> with just "dw", which will be more correct.
> > > >>>>
> > > >>>> alright, thank you. Let's add Paul to the loop since he might have very
> > > >>>> good insight in the synopsys PHYs.
> > > >>>>
> > > >>>> mental note: if any other platform shows up with Synopsys PHY, ask them
> > > >>>> to use this driver instead :-)
> > > >>>
> > > >>> I really doubt that this will bi possible. Control of the PHY's is
> > > >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough
> > > >>> QSCRATCH registers, which of course is highly Qualcomm specific.
> > > >>
> > > >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of
> > > >> registers ?
> > > >
> > > > From what I see it is not directly mapped. How QSCRATCH write and
> > > > reads transactions are translated to DW IP is unclear to me.
> > >
> > >
> > > I think the question is how does SW access them?
> >
> > I afraid the answer may be: "it depends on the SOC". In my past I had to
> > initialize a (SATA) PHY by implementing a software JTAG state machine,
> > as the PHY's registers were not memory mapped *at all*. And the IP
> > itself came from Synopsys, Cadence or yet another EDA company...
>
> Having said all that... If the PHY's spec at least defined layout of the
> registers in question and driver was using regmap API to talk to the
> device (initially regmap-mmio), it has some chances to become universal.
> The SOCs designed like "my" one would have to provide a custom regmap
> implementation.

Sound reasonable. Unfortunately I don't have PHY's IP spec.

Regards,
Ivan

>
> Paweł
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-21 15:21    [W:0.142 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site