lkml.org 
[lkml]   [2013]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/fb] x86: provide platform-devices for boot-framebuffers
Commit-ID:  e3263ab389a7bc9398c3d366819d6f39b9cfd677
Gitweb: http://git.kernel.org/tip/e3263ab389a7bc9398c3d366819d6f39b9cfd677
Author: David Herrmann <dh.herrmann@gmail.com>
AuthorDate: Fri, 2 Aug 2013 14:05:22 +0200
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 2 Aug 2013 16:17:46 -0700

x86: provide platform-devices for boot-framebuffers

The current situation regarding boot-framebuffers (VGA, VESA/VBE, EFI) on
x86 causes troubles when loading multiple fbdev drivers. The global
"struct screen_info" does not provide any state-tracking about which
drivers use the FBs. request_mem_region() theoretically works, but
unfortunately vesafb/efifb ignore it due to quirks for broken boards.

Avoid this by creating a platform framebuffer devices with a pointer
to the "struct screen_info" as platform-data. Drivers can now create
platform-drivers and the driver-core will refuse multiple drivers being
active simultaneously.

We keep the screen_info available for backwards-compatibility. Drivers
can be converted in follow-up patches.

Different devices are created for VGA/VESA/EFI FBs to allow multiple
drivers to be loaded on distro kernels. We create:
- "vesa-framebuffer" for VBE/VESA graphics FBs
- "efi-framebuffer" for EFI FBs
- "platform-framebuffer" for everything else
This allows to load vesafb, efifb and others simultaneously and each
picks up only the supported FB types.

Apart from platform-framebuffer devices, this also introduces a
compatibility option for "simple-framebuffer" drivers which recently got
introduced for OF based systems. If CONFIG_X86_SYSFB is selected, we
try to match the screen_info against a simple-framebuffer supported
format. If we succeed, we create a "simple-framebuffer" device instead
of a platform-framebuffer.
This allows to reuse the simplefb.c driver across architectures and also
to introduce a SimpleDRM driver. There is no need to have vesafb.c,
efifb.c, simplefb.c and more just to have architecture specific quirks
in their setup-routines.

Instead, we now move the architecture specific quirks into x86-setup and
provide a generic simple-framebuffer. For backwards-compatibility (if
strange formats are used), we still allow vesafb/efifb to be loaded
simultaneously and pick up all remaining devices.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1375445127-15480-4-git-send-email-dh.herrmann@gmail.com
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/Kconfig | 26 +++++++++++
arch/x86/include/asm/sysfb.h | 41 +++++++++++++++++
arch/x86/kernel/Makefile | 2 +
arch/x86/kernel/sysfb.c | 71 ++++++++++++++++++++++++++++++
arch/x86/kernel/sysfb_simplefb.c | 95 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 235 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf9..5c56559 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2270,6 +2270,32 @@ config RAPIDIO

source "drivers/rapidio/Kconfig"

+config X86_SYSFB
+ bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
+ help
+ Firmwares often provide initial graphics framebuffers so the BIOS,
+ bootloader or kernel can show basic video-output during boot for
+ user-guidance and debugging. Historically, x86 used the VESA BIOS
+ Extensions and EFI-framebuffers for this, which are mostly limited
+ to x86.
+ This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
+ framebuffers so the new generic system-framebuffer drivers can be
+ used on x86. If the framebuffer is not compatible with the generic
+ modes, it is adverticed as fallback platform framebuffer so legacy
+ drivers like efifb, vesafb and uvesafb can pick it up.
+ If this option is not selected, all system framebuffers are always
+ marked as fallback platform framebuffers as usual.
+
+ Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
+ not be able to pick up generic system framebuffers if this option
+ is selected. You are highly encouraged to enable simplefb as
+ replacement if you select this option. simplefb can correctly deal
+ with generic system framebuffers. But you should still keep vesafb
+ and others enabled as fallback if a system framebuffer is
+ incompatible with simplefb.
+
+ If unsure, say Y.
+
endmenu


diff --git a/arch/x86/include/asm/sysfb.h b/arch/x86/include/asm/sysfb.h
new file mode 100644
index 0000000..2395fe0
--- /dev/null
+++ b/arch/x86/include/asm/sysfb.h
@@ -0,0 +1,41 @@
+#ifndef _ARCH_X86_KERNEL_SYSFB_H
+#define _ARCH_X86_KERNEL_SYSFB_H
+
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/screen_info.h>
+
+#ifdef CONFIG_X86_SYSFB
+
+bool parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode);
+int create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode);
+
+#else /* CONFIG_X86_SYSFB */
+
+static inline bool parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode)
+{
+ return false;
+}
+
+static inline int create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_X86_SYSFB */
+
+#endif /* _ARCH_X86_KERNEL_SYSFB_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 88d99ea..90ecdc5 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -103,6 +103,8 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
obj-$(CONFIG_OF) += devicetree.o
obj-$(CONFIG_UPROBES) += uprobes.o
+obj-y += sysfb.o
+obj-$(CONFIG_X86_SYSFB) += sysfb_simplefb.o

obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
obj-$(CONFIG_TRACING) += tracepoint.o
diff --git a/arch/x86/kernel/sysfb.c b/arch/x86/kernel/sysfb.c
new file mode 100644
index 0000000..7f30e19
--- /dev/null
+++ b/arch/x86/kernel/sysfb.c
@@ -0,0 +1,71 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Simple-Framebuffer support for x86 systems
+ * Create a platform-device for any available boot framebuffer. The
+ * simple-framebuffer platform device is already available on DT systems, so
+ * this module parses the global "screen_info" object and creates a suitable
+ * platform device compatible with the "simple-framebuffer" DT object. If
+ * the framebuffer is incompatible, we instead create a legacy
+ * "vesa-framebuffer", "efi-framebuffer" or "platform-framebuffer" device and
+ * pass the screen_info as platform_data. This allows legacy drivers
+ * to pick these devices up without messing with simple-framebuffer drivers.
+ * The global "screen_info" is still valid at all times.
+ *
+ * If CONFIG_X86_SYSFB is not selected, we never register "simple-framebuffer"
+ * platform devices, but only use legacy framebuffer devices for
+ * backwards compatibility.
+ *
+ * TODO: We set the dev_id field of all platform-devices to 0. This allows
+ * other x86 OF/DT parsers to create such devices, too. However, they must
+ * start at offset 1 for this to work.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static __init int sysfb_init(void)
+{
+ struct screen_info *si = &screen_info;
+ struct simplefb_platform_data mode;
+ struct platform_device *pd;
+ const char *name;
+ bool compatible;
+ int ret;
+
+ /* try to create a simple-framebuffer device */
+ compatible = parse_mode(si, &mode);
+ if (compatible) {
+ ret = create_simplefb(si, &mode);
+ if (!ret)
+ return 0;
+ }
+
+ /* if the FB is incompatible, create a legacy framebuffer device */
+ if (si->orig_video_isVGA == VIDEO_TYPE_EFI)
+ name = "efi-framebuffer";
+ else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+ name = "vesa-framebuffer";
+ else
+ name = "platform-framebuffer";
+
+ pd = platform_device_register_resndata(NULL, name, 0,
+ NULL, 0, si, sizeof(*si));
+ return IS_ERR(pd) ? PTR_ERR(pd) : 0;
+}
+
+device_initcall(sysfb_init);
diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c
new file mode 100644
index 0000000..22513e9
--- /dev/null
+++ b/arch/x86/kernel/sysfb_simplefb.c
@@ -0,0 +1,95 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * simple-framebuffer probing
+ * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
+ * If the mode is incompatible, we return "false" and let the caller create
+ * legacy nodes instead.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static const char simplefb_resname[] = "BOOTFB";
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+/* try parsing x86 screen_info into a simple-framebuffer mode struct */
+__init bool parse_mode(const struct screen_info *si,
+ struct simplefb_platform_data *mode)
+{
+ const struct simplefb_format *f;
+ __u8 type;
+ unsigned int i;
+
+ type = si->orig_video_isVGA;
+ if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+ f = &formats[i];
+ if (si->lfb_depth == f->bits_per_pixel &&
+ si->red_size == f->red.length &&
+ si->red_pos == f->red.offset &&
+ si->green_size == f->green.length &&
+ si->green_pos == f->green.offset &&
+ si->blue_size == f->blue.length &&
+ si->blue_pos == f->blue.offset &&
+ si->rsvd_size == f->transp.length &&
+ si->rsvd_pos == f->transp.offset) {
+ mode->format = f->name;
+ mode->width = si->lfb_width;
+ mode->height = si->lfb_height;
+ mode->stride = si->lfb_linelength;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+__init int create_simplefb(const struct screen_info *si,
+ const struct simplefb_platform_data *mode)
+{
+ struct platform_device *pd;
+ struct resource res;
+ unsigned long len;
+
+ /* don't use lfb_size as it may contain the whole VMEM instead of only
+ * the part that is occupied by the framebuffer */
+ len = mode->height * mode->stride;
+ len = PAGE_ALIGN(len);
+ if (len > si->lfb_size << 16) {
+ printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
+ return -EINVAL;
+ }
+
+ /* setup IORESOURCE_MEM as framebuffer memory */
+ memset(&res, 0, sizeof(res));
+ res.flags = IORESOURCE_MEM;
+ res.name = simplefb_resname;
+ res.start = si->lfb_base;
+ res.end = si->lfb_base + len - 1;
+ if (res.end <= res.start)
+ return -EINVAL;
+
+ pd = platform_device_register_resndata(NULL, "simple-framebuffer", 0,
+ &res, 1, mode, sizeof(*mode));
+ if (IS_ERR(pd))
+ return PTR_ERR(pd);
+
+ return 0;
+}

\
 
 \ /
  Last update: 2013-08-03 02:01    [W:0.361 / U:1.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site