lkml.org 
[lkml]   [2013]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 87/99] rtlwifi: Initialize power-setting callback for USB devices
Date
3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit bcfb879432094c267c35a7ff75d953d3a66c193a upstream.

Commit a269913c5 entitled "rtlwifi: Rework rtl_lps_leave() and
rtl_lps_enter() to use work queue" has two bugs for USB drivers.
Firstly, the work queue in question was not initialized. Secondly,
the callback routine used by this queue is contained within the
file used for PCI devices. As a result, it is not available for
architectures without PCI hardware.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Cc: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/rtlwifi/pci.c | 13 -------------
drivers/net/wireless/rtlwifi/ps.c | 12 ++++++++++++
drivers/net/wireless/rtlwifi/ps.h | 1 +
drivers/net/wireless/rtlwifi/usb.c | 2 ++
4 files changed, 15 insertions(+), 13 deletions(-)

--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1008,19 +1008,6 @@ static void _rtl_pci_prepare_bcn_tasklet
return;
}

-static void rtl_lps_change_work_callback(struct work_struct *work)
-{
- struct rtl_works *rtlworks =
- container_of(work, struct rtl_works, lps_change_work);
- struct ieee80211_hw *hw = rtlworks->hw;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
-
- if (rtlpriv->enter_ps)
- rtl_lps_enter(hw);
- else
- rtl_lps_leave(hw);
-}
-
static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -611,6 +611,18 @@ void rtl_swlps_rf_sleep(struct ieee80211
MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
}

+void rtl_lps_change_work_callback(struct work_struct *work)
+{
+ struct rtl_works *rtlworks =
+ container_of(work, struct rtl_works, lps_change_work);
+ struct ieee80211_hw *hw = rtlworks->hw;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->enter_ps)
+ rtl_lps_enter(hw);
+ else
+ rtl_lps_leave(hw);
+}

void rtl_swlps_wq_callback(void *data)
{
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -49,5 +49,6 @@ void rtl_swlps_rf_awake(struct ieee80211
void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_lps_change_work_callback(struct work_struct *work);

#endif
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -1070,6 +1070,8 @@ int rtl_usb_probe(struct usb_interface *
spin_lock_init(&rtlpriv->locks.usb_lock);
INIT_WORK(&rtlpriv->works.fill_h2c_cmd,
rtl_fill_h2c_cmd_work_callback);
+ INIT_WORK(&rtlpriv->works.lps_change_work,
+ rtl_lps_change_work_callback);

rtlpriv->usb_data_index = 0;
init_completion(&rtlpriv->firmware_loading_complete);



\
 
 \ /
  Last update: 2013-08-02 15:21    [W:0.760 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site