lkml.org 
[lkml]   [2013]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] iio: ti_am335x_adc: Add continuous sampling and trigger support
On 08/16/13 11:07, Sebastian Andrzej Siewior wrote:
> * Jonathan Cameron | 2013-08-15 12:43:02 [+0100]:
>
>> Hi,
> Hi Jonathan,
>
>> Whilst the below review is based on what we have here, I tried to apply it
>> to the latest iio.git togreg branch (which for this driver should be
>> much the same as staging-next and hence linux-next). It's not even
>> close and I can't immediately spot where some of the changes came
>> from. Have I missed a precursor patch or is this based on an
>> older version of this driver?
>
> I took the four patches, checkout iio/fixes-togreg and then
>
> |git am -3 iio.mbox
> |Applying: input: ti_am335x_tsc: correct step mask update after IRQ
> |Applying: input: ti_am335x_tsc: Increase sequencer delay time
> |Applying: input: ti_am335x_tsc: Enable shared IRQ for TSC, add overrun and underflow checks
> |Applying: iio: ti_am335x_adc: Add continuous sampling and trigger support
>
> It did apply with no trouble here.
> Let me look at your comments…

Ah, fixes-togreg is for this cycle, whereas new stuff like this needs
to go on the togreg branch. Hence please rebase on the togreg branch
instead.

That would explain it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-16 13:01    [W:0.133 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site