lkml.org 
[lkml]   [2013]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] iio: input: ti_am335x_adc: Add continuous sampling support round 5
Date
Round 5 updates. Fixed the define order in the header as guided by Lee.

Round 4 updates below.

Note: These apply to the fixes-togreg branch in IIO because of
a fix on the adc side in there.

The first few are for input which tweak the TSC driver to
allow ADC in continuous mode with irqs to work nicely together.

The last one is for iio which adds continuous mode to the adc side.

Received feedback on previous series.
1. What if IRQs occur together?
This is handled now. Even if both assert.
They both work.

2. IIO error handling wrong.
Fixed now.

3. Headers wierd in IIO.
Fixed.

Apart from that, found a few bugs in continuous mode
here and there. And squashed them into the same patch.

Thanks
Zubair Lutfullah

Zubair Lutfullah (4):
input: ti_am335x_tsc: correct step mask update after IRQ
input: ti_am335x_tsc: Increase sequencer delay time
input: ti_am335x_tsc: Enable shared IRQ for TSC, add overrun and
underflow checks
iio: ti_am335x_adc: Add continuous sampling and trigger support

drivers/iio/adc/ti_am335x_adc.c | 353 ++++++++++++++++++++++++-----
drivers/input/touchscreen/ti_am335x_tsc.c | 45 +++-
include/linux/mfd/ti_am335x_tscadc.h | 14 ++
3 files changed, 342 insertions(+), 70 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2013-08-13 23:01    [W:0.203 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site