lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
On 01/08/2013 08:18, Boris BREZILLON :
> The AT91 PMC (Power Management Controller) provides an USB clock used by
> USB Full Speed host (ohci) and USB Full Speed device (udc).
> The usb drivers (ohci and udc) must configure this clock to 48Mhz.
> This configuration was formely done in mach-at91/clock.c, but this
> implementation will be removed when moving to common clk framework.
>
> This patch adds support for usb clock retrieval and configuration, and is
> backward compatible with the current at91 clk implementation (if usb clk
> is not found, it does not configure/enable it).
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> drivers/usb/gadget/at91_udc.c | 17 ++++++++++++++++-
> drivers/usb/gadget/at91_udc.h | 2 +-
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
> index fce8e4e..ae06585 100644
> --- a/drivers/usb/gadget/at91_udc.c
> +++ b/drivers/usb/gadget/at91_udc.c
> @@ -870,6 +870,11 @@ static void clk_on(struct at91_udc *udc)
> if (udc->clocked)
> return;
> udc->clocked = 1;
> +
> + if (!IS_ERR(udc->uclk)) {
> + clk_set_rate(udc->uclk, 48000000);
> + clk_prepare_enable(udc->uclk);
> + }
> clk_prepare_enable(udc->iclk);
> clk_prepare_enable(udc->fclk);
> }
> @@ -882,6 +887,8 @@ static void clk_off(struct at91_udc *udc)
> udc->gadget.speed = USB_SPEED_UNKNOWN;
> clk_disable_unprepare(udc->fclk);
> clk_disable_unprepare(udc->iclk);
> + if (!IS_ERR(udc->uclk))
> + clk_disable_unprepare(udc->uclk);
> }
>
> /*
> @@ -1774,10 +1781,10 @@ static int at91udc_probe(struct platform_device *pdev)
> /* get interface and function clocks */
> udc->iclk = clk_get(dev, "udc_clk");
> udc->fclk = clk_get(dev, "udpck");
> + udc->uclk = clk_get(dev, "usb_clk");
> if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
> DBG("clocks missing\n");
> retval = -ENODEV;
> - /* NOTE: we "know" here that refcounts on these are NOPs */
> goto fail1;
> }
>
> @@ -1851,6 +1858,12 @@ fail3:
> fail2:
> free_irq(udc->udp_irq, udc);
> fail1:
> + if (!IS_ERR(udc->uclk))
> + clk_put(udc->uclk);
> + if (!IS_ERR(udc->fclk))
> + clk_put(udc->fclk);
> + if (!IS_ERR(udc->iclk))
> + clk_put(udc->iclk);
> iounmap(udc->udp_baseaddr);
> fail0a:
> if (cpu_is_at91rm9200())
> @@ -1894,6 +1907,8 @@ static int __exit at91udc_remove(struct platform_device *pdev)
>
> clk_put(udc->iclk);
> clk_put(udc->fclk);
> + if (!IS_ERR(udc->uclk))
> + clk_put(udc->uclk);
>
> return 0;
> }
> diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
> index e647d1c..0175246 100644
> --- a/drivers/usb/gadget/at91_udc.h
> +++ b/drivers/usb/gadget/at91_udc.h
> @@ -126,7 +126,7 @@ struct at91_udc {
> unsigned active_suspend:1;
> u8 addr;
> struct at91_udc_data board;
> - struct clk *iclk, *fclk;
> + struct clk *iclk, *fclk, *uclk;
> struct platform_device *pdev;
> struct proc_dir_entry *pde;
> void __iomem *udp_baseaddr;
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-08-12 16:01    [W:0.149 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site