Messages in this thread Patch in this message | | | From | Boris BREZILLON <> | Subject | [PATCH 5/8] ARM: at91/dt: use periph id macros for at91sam9g45 interrupt definitions | Date | Thu, 1 Aug 2013 08:57:03 +0200 |
| |
This patch make use of the peripheral id macros defined in dt-bindings/at91/at91sam9g45/peripherals.h to register peripheral interrupts.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- arch/arm/boot/dts/at91sam9g45.dtsi | 57 +++++++++++++------------ arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +- 2 files changed, 30 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index c3e5148..c709780 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/at91/at91sam9g45/peripherals.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -69,7 +70,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; - atmel,external-irqs = <31>; + atmel,external-irqs = <AT91SAM9G45_ID_IRQ0>; }; ramc0: ramc@ffffe400 { @@ -91,7 +92,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -103,19 +104,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_DMA IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -428,7 +429,7 @@ pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + interrupts = <AT91SAM9G45_ID_PIOA IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -438,7 +439,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + interrupts = <AT91SAM9G45_ID_PIOB IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -448,7 +449,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + interrupts = <AT91SAM9G45_ID_PIOC IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -458,7 +459,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + interrupts = <AT91SAM9G45_ID_PIODE IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -468,7 +469,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + interrupts = <AT91SAM9G45_ID_PIODE IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -479,7 +480,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -488,7 +489,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_US0 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -499,7 +500,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_US1 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -510,7 +511,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_US2 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -521,7 +522,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_US3 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -532,7 +533,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; + interrupts = <AT91SAM9G45_ID_EMAC IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -541,7 +542,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + interrupts = <AT91SAM9G45_ID_TWI0 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -550,7 +551,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; + interrupts = <AT91SAM9G45_ID_TWI1 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -559,7 +560,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_SSC0 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -568,7 +569,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; + interrupts = <AT91SAM9G45_ID_SSC1 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -577,7 +578,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_TSC IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -617,7 +618,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_MCI0 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -628,7 +629,7 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_MCI1 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; @@ -647,7 +648,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <AT91SAM9G45_ID_SPI0 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -658,7 +659,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <AT91SAM9G45_ID_SPI1 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -670,7 +671,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <AT91SAM9G45_ID_UDPHS IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; ep0 { @@ -748,14 +749,14 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + interrupts = <AT91SAM9G45_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + interrupts = <AT91SAM9G45_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 3f1a509..361fbc3 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,7 +18,7 @@ /* * Peripheral identifiers/interrupts. */ -#include <dt-bindings/at91/at91sam9263/peripherals.h> +#include <dt-bindings/at91/at91sam9g45/peripherals.h> /* * User Peripheral physical base addresses. -- 1.7.9.5
| |