lkml.org 
[lkml]   [2013]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] usb: musb: dsps: use proper child nodes
On 08/01/2013 12:52 PM, Sebastian Andrzej Siewior wrote:
> On 08/01/2013 07:24 AM, George Cherian wrote:
>>> b/arch/arm/boot/dts/am33xx.dtsi
>>> index 38b446b..0f756ca 100644
>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>> @@ -333,21 +337,85 @@
>>> status = "disabled";
>>> };
>>> - usb@47400000 {
>>> - compatible = "ti,musb-am33xx";
>>> - reg = <0x47400000 0x1000 /* usbss */
>>> - 0x47401000 0x800 /* musb instance 0 */
>>> - 0x47401800 0x800>; /* musb instance 1 */
>>> - interrupts = <17 /* usbss */
>>> - 18 /* musb instance 0 */
>>> - 19>; /* musb instance 1 */
>>> - multipoint = <1>;
>>> - num-eps = <16>;
>>> - ram-bits = <12>;
>>> - port0-mode = <3>;
>>> - port1-mode = <3>;
>>> - power = <250>;
>>> + usb: usb@47400000 {
>>> + compatible = "ti,am33xx-usb";
>>> + reg = <0x47400000 0x1000>;
>>> + ranges;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> ti,hwmods = "usb_otg_hs";
>>> + status = "disabled";
>>> +
>>> + ctrl_mod: control@44e10000 {
>>> + compatible = "ti,am335x-ctrl-module";
>>> + reg = <0x44e10000 0x650>;
>>
>> Do you really need to map Control Module base to 0x650? If some other
>> driver does this mapping
>
> This is what I cam currently not sure about. Either we minimize the
> register window and introduce two (the other wakeup) or we keep using
> the same reset driver for other devices.

I mean drivers/reset or something like that.



Sebastian


\
 
 \ /
  Last update: 2013-08-01 13:41    [W:0.871 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site