lkml.org 
[lkml]   [2013]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] i2c-designware: configure *CNT values from ACPI
Date
Some Intel LPSS I2C devices make the *CNT values available from ACPI
namespace in similar way than the SDA hold value. These values allow
platform/BIOS to specify the most accurate *CNT values for the device
driver to use.

So change the ACPI part of the driver to use these values if they exists
and otherwise use the default method based solely on the input clock speed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
This applies on top of following patch which is not yet in i2c tree:

http://permalink.gmane.org/gmane.linux.drivers.i2c/15754

drivers/i2c/busses/i2c-designware-platdrv.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c7cfdac..a1488df 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -59,7 +59,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
- acpi_string name;

if (!handle)
return -ENODEV;
@@ -68,14 +67,32 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dev->tx_fifo_depth = 32;
dev->rx_fifo_depth = 32;

- name = dev->master_cfg & DW_IC_CON_SPEED_FAST ? "FMCN" : "SSCN";
- if (ACPI_SUCCESS(acpi_evaluate_object(handle, name, NULL, &buf))) {
+ /* Standard speed configuration */
+ if (ACPI_SUCCESS(acpi_evaluate_object(handle, "SSCN", NULL, &buf))) {
union acpi_object *obj = (union acpi_object *)buf.pointer;

if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
const union acpi_object *objs = obj->package.elements;

- dev->sda_hold_time = (u32)objs[2].integer.value;
+ dev->ss_hcnt = (u16)objs[0].integer.value;
+ dev->ss_lcnt = (u16)objs[1].integer.value;
+ if (!(dev->master_cfg & DW_IC_CON_SPEED_FAST))
+ dev->sda_hold_time = (u32)objs[2].integer.value;
+ }
+
+ kfree(buf.pointer);
+ }
+ /* Fast speed configuration */
+ if (ACPI_SUCCESS(acpi_evaluate_object(handle, "FMCN", NULL, &buf))) {
+ union acpi_object *obj = (union acpi_object *)buf.pointer;
+
+ if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
+ const union acpi_object *objs = obj->package.elements;
+
+ dev->fs_hcnt = (u16)objs[0].integer.value;
+ dev->fs_lcnt = (u16)objs[1].integer.value;
+ if (dev->master_cfg & DW_IC_CON_SPEED_FAST)
+ dev->sda_hold_time = (u32)objs[2].integer.value;
}

kfree(buf.pointer);
--
1.8.3.2


\
 
 \ /
  Last update: 2013-07-10 23:13    [W:0.125 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site