lkml.org 
[lkml]   [2013]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv4 09/10] clocksource: sun4i: Cleanup parent clock setup
Date
The current bring-up code for the timer was overly complicated. The only
thing we need is actually which clock we want to use as source and
that's pretty much all. Let's keep it that way.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clocksource/sun4i_timer.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 3217adc..2fadb3b 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -30,6 +30,9 @@
#define TIMER_CTL_REG(val) (0x10 * val + 0x10)
#define TIMER_CTL_ENABLE BIT(0)
#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2)
+#define TIMER_CTL_CLK_SRC_OSC24M (1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
#define TIMER_CTL_ONESHOT BIT(7)
#define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14)
#define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18)
@@ -168,16 +171,8 @@ static void __init sun4i_timer_init(struct device_node *node)

writel(rate / HZ, timer_base + TIMER_INTVAL_REG(0));

- /* set clock source to HOSC, 16 pre-division */
- val = readl(timer_base + TIMER_CTL_REG(0));
- val &= ~(0x07 << 4);
- val &= ~(0x03 << 2);
- val |= (4 << 4) | (1 << 2);
- writel(val, timer_base + TIMER_CTL_REG(0));
-
- /* set mode to auto reload */
- val = readl(timer_base + TIMER_CTL_REG(0));
- writel(val | TIMER_CTL_RELOAD, timer_base + TIMER_CTL_REG(0));
+ writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(0));

ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
--
1.8.3.2


\
 
 \ /
  Last update: 2013-07-06 01:01    [W:0.119 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site