lkml.org 
[lkml]   [2013]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] drm/i915: Add async page flip support for IVB
On Thu, Jul 25, 2013 at 03:15:14PM -0700, Keith Packard wrote:
> This adds the necesary register defines for async page flipping
> through the command ring, and then hooks those up for Ivybridge (gen7)
> page flipping.

Maybe mention hsw in the patch subject/description too.

>
> Signed-off-by: Keith Packard <keithp@keithp.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
> drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++++++++++++++++++++----
> 2 files changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dc3d6a7..029cfb0 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -209,6 +209,7 @@
> #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
> #define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
> #define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
> +#define MI_DISPLAY_FLIP_ASYNC_INDICATOR (1 << 22)
> #define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
> /* IVB has funny definitions for which plane to flip. */
> #define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
> @@ -217,6 +218,11 @@
> #define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
> #define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
> #define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
> +/* These go in the bottom of the base address value */
> +#define MI_DISPLAY_FLIP_TYPE_SYNC (0 << 0)
> +#define MI_DISPLAY_FLIP_TYPE_ASYNC (1 << 0)
> +#define MI_DISPLAY_FLIP_TYPE_STEREO (2 << 0)
> +#define MI_DISPLAY_FLIP_TYPE_SYNCHRONOUS (0 << 0)

Duplicated bit.

> #define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
> #define MI_ARB_ENABLE (1<<0)
> #define MI_ARB_DISABLE (0<<0)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index bdb8854..166aa2c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1833,8 +1833,10 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
> alignment = 64 * 1024;
> break;
> case I915_TILING_X:
> - /* pin() will align the object as required by fence */
> - alignment = 0;
> + /* Async page flipping requires X tiling and 32kB alignment, so just
> + * make all X tiled frame buffers aligned for that
> + */
> + alignment = 32 * 1024;

You could limit this to gens for which you implemented async flips.

gen2/3 seem to require a 256KB alignment for async flips.

> break;
> case I915_TILING_Y:
> /* Despite that we check this in framebuffer_init userspace can
> @@ -7514,6 +7516,8 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
> uint32_t plane_bit = 0;
> + uint32_t cmd;
> + uint32_t base;
> int ret;
>
> ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
> @@ -7536,13 +7540,21 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
> goto err_unpin;
> }
>
> + cmd = MI_DISPLAY_FLIP_I915 | plane_bit;
> + base = i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
> +
> + if (flags & DRM_MODE_PAGE_FLIP_ASYNC) {
> + cmd |= MI_DISPLAY_FLIP_ASYNC_INDICATOR;
> + base |= MI_DISPLAY_FLIP_TYPE_ASYNC;
> + }
> +
> ret = intel_ring_begin(ring, 4);
> if (ret)
> goto err_unpin;
>
> - intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
> + intel_ring_emit(ring, cmd);
> intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
> - intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
> + intel_ring_emit(ring, base);
> intel_ring_emit(ring, (MI_NOOP));
>
> intel_mark_page_flip_active(intel_crtc);
> @@ -7591,6 +7603,19 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
> fb->pitches[0] != crtc->fb->pitches[0]))
> return -EINVAL;
>
> + /* Check tiling restrictions specific to asynchronous flips
> + */
> + if (page_flip_flags & DRM_MODE_PAGE_FLIP_ASYNC) {
> +
> + /* New FB must be X tiled */
> + if (obj->tiling_mode != I915_TILING_X)
> + return -EINVAL;
> +
> + /* Current FB must be X tiled */
> + if (to_intel_framebuffer(old_fb)->obj->tiling_mode != I915_TILING_X)
> + return -EINVAL;
> + }
> +
> work = kzalloc(sizeof *work, GFP_KERNEL);
> if (work == NULL)
> return -ENOMEM;
> @@ -9705,6 +9730,10 @@ void intel_modeset_init(struct drm_device *dev)
> dev->mode_config.max_width = 8192;
> dev->mode_config.max_height = 8192;
> }
> +
> + if (IS_GEN7(dev))
> + dev->mode_config.async_page_flip = true;
> +
> dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
>
> DRM_DEBUG_KMS("%d display pipe%s available.\n",
> --
> 1.8.3.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Ville Syrjälä
Intel OTC
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-07-30 19:01    [W:1.965 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site