lkml.org 
[lkml]   [2013]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
On Mon, Jul 29, 2013 at 12:21:22PM -0300, Ezequiel Garcia wrote:
> If CONFIG_HAVE_CLK is not selected, then all the clk API turn out
> into stubs, so there's no need to have the ifdefs.
> The only side-effect of this patch is the extra tiny kmalloc,
> but that's not enough reason to have such ugly ifdefs all around
> the code.
>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

Hi Ezequiel

What architectures did you compile this for? PowerPC and x86 as well
as ARM? I _think_ this driver is also used there, and i _think_
without some #ifdef, it failed to build. But maybe since then, the
common clock is now available on all architectures?

Andrew


> ---
> drivers/ata/sata_mv.c | 14 --------------
> 1 file changed, 14 deletions(-)
>
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 10ea99a..3519987 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -553,10 +553,8 @@ struct mv_host_priv {
> u32 irq_mask_offset;
> u32 unmask_all_irqs;
>
> -#if defined(CONFIG_HAVE_CLK)
> struct clk *clk;
> struct clk **port_clks;
> -#endif
> /*
> * These consistent DMA memory pools give us guaranteed
> * alignment for hardware-accessed data structures,
> @@ -4032,9 +4030,7 @@ static int mv_platform_probe(struct platform_device *pdev)
> struct resource *res;
> int n_ports = 0, irq = 0;
> int rc;
> -#if defined(CONFIG_HAVE_CLK)
> int port;
> -#endif
>
> ata_print_version_once(&pdev->dev, DRV_VERSION);
>
> @@ -4068,13 +4064,11 @@ static int mv_platform_probe(struct platform_device *pdev)
>
> if (!host || !hpriv)
> return -ENOMEM;
> -#if defined(CONFIG_HAVE_CLK)
> hpriv->port_clks = devm_kzalloc(&pdev->dev,
> sizeof(struct clk *) * n_ports,
> GFP_KERNEL);
> if (!hpriv->port_clks)
> return -ENOMEM;
> -#endif
> host->private_data = hpriv;
> hpriv->n_ports = n_ports;
> hpriv->board_idx = chip_soc;
> @@ -4084,7 +4078,6 @@ static int mv_platform_probe(struct platform_device *pdev)
> resource_size(res));
> hpriv->base -= SATAHC0_REG_BASE;
>
> -#if defined(CONFIG_HAVE_CLK)
> hpriv->clk = clk_get(&pdev->dev, NULL);
> if (IS_ERR(hpriv->clk))
> dev_notice(&pdev->dev, "cannot get optional clkdev\n");
> @@ -4098,7 +4091,6 @@ static int mv_platform_probe(struct platform_device *pdev)
> if (!IS_ERR(hpriv->port_clks[port]))
> clk_prepare_enable(hpriv->port_clks[port]);
> }
> -#endif
>
> /*
> * (Re-)program MBUS remapping windows if we are asked to.
> @@ -4124,7 +4116,6 @@ static int mv_platform_probe(struct platform_device *pdev)
> return 0;
>
> err:
> -#if defined(CONFIG_HAVE_CLK)
> if (!IS_ERR(hpriv->clk)) {
> clk_disable_unprepare(hpriv->clk);
> clk_put(hpriv->clk);
> @@ -4135,7 +4126,6 @@ err:
> clk_put(hpriv->port_clks[port]);
> }
> }
> -#endif
>
> return rc;
> }
> @@ -4151,13 +4141,10 @@ err:
> static int mv_platform_remove(struct platform_device *pdev)
> {
> struct ata_host *host = platform_get_drvdata(pdev);
> -#if defined(CONFIG_HAVE_CLK)
> struct mv_host_priv *hpriv = host->private_data;
> int port;
> -#endif
> ata_host_detach(host);
>
> -#if defined(CONFIG_HAVE_CLK)
> if (!IS_ERR(hpriv->clk)) {
> clk_disable_unprepare(hpriv->clk);
> clk_put(hpriv->clk);
> @@ -4168,7 +4155,6 @@ static int mv_platform_remove(struct platform_device *pdev)
> clk_put(hpriv->port_clks[port]);
> }
> }
> -#endif
> return 0;
> }
>
> --
> 1.8.1.5
>


\
 
 \ /
  Last update: 2013-07-29 21:41    [W:0.067 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site