lkml.org 
[lkml]   [2013]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/6] Documentation: Add device tree bindings for DA9063 PMIC
Date
This patch adds device tree binding documentation for the Dialog Semiconductors
DA9063 PMIC and its regulator nodes.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org
---
.../devicetree/bindings/mfd/da9063-i2c.txt | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/da9063-i2c.txt

diff --git a/Documentation/devicetree/bindings/mfd/da9063-i2c.txt b/Documentation/devicetree/bindings/mfd/da9063-i2c.txt
new file mode 100644
index 0000000..776b662
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9063-i2c.txt
@@ -0,0 +1,68 @@
+* Dialog DA9063 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "dialog,da9063"
+- interrupt-parent : phandle pointing to the interrupt controller
+- interrupts : interrupt number and flags in interrupt-parent
+ for the chip IRQ line. Interrupt bindings are documented here:
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9063 regulators are
+ bound using their names as listed below:
+
+ bcore1 : regulator BCORE1
+ bcore2 : regulator BCORE2
+ bpro : regulator BPRO
+ bmem : regulator BMEM
+ bio : regulator BIO
+ bperi : regulator BPERI
+ ldo1 : regulator LDO1
+ ldo2 : regulator LDO4
+ ldo3 : regulator LDO3
+ ldo4 : regulator LDO4
+ ldo5 : regulator LDO5
+ ldo6 : regulator LDO6
+ ldo7 : regulator LDO7
+ ldo8 : regulator LDO8
+ ldo9 : regulator LDO9
+ ldo10 : regulator LDO10
+ ldo11 : regulator LDO11
+
+ The PMIC can also be configured to merge both bcore1/2 into a single
+ supply and to merge bmem and bio into a single supply. In this case,
+ the following regulators are bound instead of bcore1/2 and bpro/bmem:
+
+ bcores-merged : merged regulators BCORE1, BCORE2
+ bmem-bio-merged : merged regulators BMEM, BIO
+
+ See Documentation/devicetree/bindings/regulator/regulator.txt for
+ binding details of individual regulator device nodes.
+
+
+Examples:
+
+&i2c1 {
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dialog,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+ regulators {
+ bcore1 {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ };
+
+ bcore2 {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ };
+
+ /* ... */
+ };
+ };
+};
--
1.8.3.2


\
 
 \ /
  Last update: 2013-07-29 19:21    [W:0.073 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site