lkml.org 
[lkml]   [2013]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [git pull] drm fixes - regular pull req
On 07/26/2013 12:52 PM, Dave Airlie wrote:
>
> This is just a regular fixes pull apart from the qxl one, it has radeon
> and intel bits in it,
>
> the intel fixes are for a regression with the RC6 fix and a 3.10 hdmi
> regression, whereas radeon is more DPM fixes, a few lockup fixes and
> some rn50/r100 DAC fixes.
>
> Dave.
>
> The following changes since commit 07bc9dc1b01bad7084fed3d2659e5d83317869bc:
>
> Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc (2013-07-24 11:07:18 -0700)
>
> are available in the git repository at:
>
>
> git://people.freedesktop.org/~airlied/linux drm-fixes
>
> for you to fetch changes up to bf903e4141fce4b35072d5b8fa0ddd299aaf01ea:
>
> Merge tag 'drm-intel-fixes-2013-07-25' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes (2013-07-26 20:38:14 +1000)
>
> ----------------------------------------------------------------
>
> Alex Deucher (8):
> drm/radeon: wait for 3D idle before using CP DMA
> drm/radeon/vm: only align the pt base to 32k
> drm/radeon: fix endian issues with DP handling (v3)
> drm/radeon: improve dac adjust heuristics for legacy pdac
> drm/radeon/dpm: fix a typo in the rv6xx mclk setup
> drm/radeon/dpm: fix displaygap programming on rv6xx
> drm/radeon/dpm: implement force performance levels for rv6xx
> drm/radeon/dpm: fix r600_enable_sclk_control()
>
> Daniel Vetter (1):
> drm/i915: fix hdmi portclock limits
>
> Dave Airlie (2):
> Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
> Merge tag 'drm-intel-fixes-2013-07-25' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
>
> Jani Nikula (1):
> drm/i915: initialize gt_lock early with other spin locks
>
> Mark Kettenis (1):
> drm/radeon: fix combios tables on older cards
>
> Ondrej Zary (1):
> drm/radeon: Another card with wrong primary dac adj
>
> drivers/gpu/drm/i915/i915_dma.c | 1 +
> drivers/gpu/drm/i915/intel_hdmi.c | 19 +++-
> drivers/gpu/drm/i915/intel_pm.c | 2 -
> drivers/gpu/drm/radeon/atombios_dp.c | 43 ++++++++-
> drivers/gpu/drm/radeon/r600.c | 5 +-
> drivers/gpu/drm/radeon/r600_dpm.c | 4 +-
> drivers/gpu/drm/radeon/radeon_asic.c | 1 +
> drivers/gpu/drm/radeon/radeon_asic.h | 2 +
> drivers/gpu/drm/radeon/radeon_combios.c | 159 ++++++++++----------------------
> drivers/gpu/drm/radeon/radeon_gart.c | 8 +-
> drivers/gpu/drm/radeon/rv6xx_dpm.c | 41 +++++++-
> 11 files changed, 158 insertions(+), 127 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

FYI, with these commits, I'm still seeing attached stack trace and
" [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the
VCPU!!! "
messages *after* resuming from Suspend-2-Ram.

This is with new power management enabled (radeon.dpm=1) which seems to
work just fine.

_
Jim


[ 198.100849] ACPI: Low-level resume complete
[ 198.100883] PM: Restoring platform NVS memory
[ 198.101277] Enabling non-boot CPUs ...
[ 198.101305] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 198.114618] CPU1 is up
[ 198.114629] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 198.127911] CPU2 is up
[ 198.127922] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 198.141200] CPU3 is up
[ 198.143177] ACPI: Waking up from system sleep state S3
[ 198.154441] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 198.167770] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 198.207819] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[ 198.234485] pcieport 0000:00:1c.5: System wakeup disabled by ACPI
[ 198.247912] PM: noirq resume of devices complete after 104.343 msecs
[ 198.248040] PM: early resume of devices complete after 0.088 msecs
[ 198.248086] ahci 0000:00:1f.2: setting latency timer to 64
[ 198.248109] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 198.248222] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 198.248319] pcieport 0000:00:1c.6: System wakeup disabled by ACPI
[ 198.251310] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 198.251727] serial 00:02: activated
[ 198.253294] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[ 198.253396] radeon 0000:01:00.0: WB enabled
[ 198.253398] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88032d113c00
[ 198.253399] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88032d113c0c
[ 198.253873] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001189c418
[ 198.270138] [drm] ring test on 0 succeeded in 0 usecs
[ 198.270200] [drm] ring test on 3 succeeded in 0 usecs
[ 198.581079] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 198.581095] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 198.583586] ata4.00: configured for UDMA/66
[ 198.602750] ata2.00: configured for UDMA/133
[ 198.607734] ata5: SATA link down (SStatus 0 SControl 300)
[ 198.921060] ata6: SATA link down (SStatus 0 SControl 300)
[ 199.456226] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 200.476190] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 201.496155] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 202.516121] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 203.536086] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 203.600929] ata1: link is slow to respond, please be patient (ready=0)
[ 204.357573] ------------[ cut here ]------------
[ 204.357578] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x220/0x230()
[ 204.357578] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[ 204.357597] Modules linked in: ipt_MASQUERADE iptable_nat nf_nat_ipv4 iptable_raw xt_CT nf_nat_ftp nf_conntrack_ftp nf_conntrack_ipv4 nf_defrag_ipv4 xt_nat nf_nat nf_conntrack tun cn nfsd auth_rpcgss oid_registry exportfs lockd sunrpc ftdi_sio usbserial hid_logitech_dj usbhid fuse usb_storage ehci_pci xhci_hcd ehci_hcd lpc_ich i2c_i801 serio_raw usbcore mfd_core emu10k1_gp usb_common i2c_dev rtc_cmos evdev
[ 204.357605] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc2+ #45
[ 204.357606] Hardware name: MSI MS-7673/P67A-C45 (MS-7673), BIOS V1.18 02/22/2012
[ 204.357608] 0000000000000009 ffffffff81663ceb ffff88033f483e38 ffffffff8103dc6d
[ 204.357608] 0000000000000000 ffff88033f483e88 0000000000000001 0000000000000001
[ 204.357609] ffff88032de01428 ffffffff8103dcd7 ffffffff818ae808 ffff880300000030
[ 204.357609] Call Trace:
[ 204.357612] <IRQ> [<ffffffff81663ceb>] ? dump_stack+0x41/0x51
[ 204.357615] [<ffffffff8103dc6d>] ? warn_slowpath_common+0x6d/0x90
[ 204.357617] [<ffffffff8103dcd7>] ? warn_slowpath_fmt+0x47/0x50
[ 204.357618] [<ffffffff8159d6b0>] ? dev_watchdog+0x220/0x230
[ 204.357619] [<ffffffff8159d490>] ? dev_graft_qdisc+0x70/0x70
[ 204.357621] [<ffffffff8104b05c>] ? call_timer_fn.isra.30+0x1c/0x80
[ 204.357622] [<ffffffff8104b239>] ? run_timer_softirq+0x179/0x250
[ 204.357625] [<ffffffff812a9bc8>] ? timerqueue_add+0x58/0xa0
[ 204.357626] [<ffffffff81045026>] ? __do_softirq+0xd6/0x1a0
[ 204.357627] [<ffffffff81045225>] ? irq_exit+0x95/0xa0
[ 204.357637] [<ffffffff810291ab>] ? smp_apic_timer_interrupt+0x3b/0x50
[ 204.357638] [<ffffffff8166b147>] ? apic_timer_interrupt+0x67/0x70
[ 204.357641] <EOI> [<ffffffff814f4967>] ? cpuidle_enter_state+0x47/0xc0
[ 204.357642] [<ffffffff814f4963>] ? cpuidle_enter_state+0x43/0xc0
[ 204.357643] [<ffffffff814f4a8a>] ? cpuidle_idle_call+0xaa/0x150
[ 204.357645] [<ffffffff8100af05>] ? arch_cpu_idle+0x5/0x20
[ 204.357646] [<ffffffff8107c3b8>] ? cpu_startup_entry+0x78/0x160
[ 204.357647] ---[ end trace 361118f69f20cf04 ]---
[ 204.556052] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 205.576018] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 206.214201] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 206.232507] ata1.00: configured for UDMA/133
[ 206.244238] sd 1:0:0:0: [sdb] Starting disk
[ 206.244245] sd 0:0:0:0: [sda] Starting disk
[ 206.595993] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 207.615957] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 208.635922] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[ 208.655922] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[ 208.655924] [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).
[ 208.655946] [drm] ib test on ring 0 succeeded in 0 usecs
[ 208.655967] [drm] ib test on ring 3 succeeded in 1 usecs
[ 208.657399] switching from power state:
[ 208.657400] ui class: none
[ 208.657401] internal class: boot
[ 208.657401] caps: video
[ 208.657402] uvd vclk: 0 dclk: 0
[ 208.657402] power level 0 sclk: 77500 mclk: 80000 vddc: 1050 vddci: 0
[ 208.657403] power level 1 sclk: 77500 mclk: 80000 vddc: 1050 vddci: 0
[ 208.657403] power level 2 sclk: 77500 mclk: 80000 vddc: 1050 vddci: 0
[ 208.657404] status: c b
[ 208.657404] switching to power state:
[ 208.657404] ui class: performance
[ 208.657405] internal class: none
[ 208.657405] caps: single_disp video
[ 208.657406] uvd vclk: 0 dclk: 0
[ 208.657413] power level 0 sclk: 15700 mclk: 20000 vddc: 1000 vddci: 0
[ 208.657414] power level 1 sclk: 40000 mclk: 80000 vddc: 1000 vddci: 0
[ 208.657414] power level 2 sclk: 77500 mclk: 80000 vddc: 1050 vddci: 0
[ 208.657414] status: r
[ 208.770287] r8169 0000:07:00.0 eth0: link up
[ 208.815254] PM: resume of devices complete after 10567.485 msecs
[ 208.815424] Restarting tasks ... done.
[ 208.823626] r8169 0000:07:00.0 eth0: link up
[ 209.841619] nfsd: last server has exited, flushing export cache
[ 211.424982] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 211.435954] svc: failed to register lockdv1 RPC service (errno 97).
[ 211.435980] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 211.435989] NFSD: starting 90-second grace period (net ffffffff81977b00)
[ 211.630569] ata1.00: configured for UDMA/133
[ 211.630575] ata1: EH complete
[ 211.654848] ata2.00: configured for UDMA/133
[ 211.654854] ata2: EH complete
\
 
 \ /
  Last update: 2013-07-27 12:21    [W:0.164 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site